patrick/OpenDTU-old
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
2,087 Commits 2 Branches 144 Tags 78 MiB
bbf0003d1c
Commit Graph

759 Commits

Author SHA1 Message Date
helgeerbe
71dda4b89c Merge branch 'pr/qubeck/156' into development 2023-04-25 18:39:02 +02:00
MalteSchm
0a0488f73a refactored use solar power code 2023-04-25 12:03:41 +02:00
MalteSchm
322f532ac0 Proper handling of use solar power only case 2023-04-25 10:41:35 +02:00
Thomas Basler
98da2b64e2 Rename FLD_PRA to FLD_Q 2023-04-24 22:29:59 +02:00
Thomas Basler
26cbc496a7 Feature: Implemented MQTT publishing of total values 
If one or more inverter is not reachable the flag is_valid changes to zero. Disabled inverters are ignored.
 2023-04-24 18:51:30 +02:00
MalteSchm
3861ab89f1 WebApi update to include power values 2023-04-23 18:49:32 +02:00
helgeerbe
75a59f5d1d
Merge pull request #175 from MalteSchm:huawei_spi_interface_fix 
Changing Huawei SPI interface
 2023-04-23 18:32:36 +02:00
MalteSchm
8c9afbcdc0 fix an issue if inverter is behind power meter 2023-04-23 11:30:08 +02:00
Thomas Basler
04f62e03b8 BREAKING CHANGE: Web API Endpoint /api/eventlog/status no nested serial object 
It's not required as the  eventlog just contains events from requested inverter
 2023-04-20 22:41:55 +02:00
helgeerbe
38b990fbbc Fix: PowerLimiter is now casted to signed int to allow negativ values. 2023-04-20 20:02:59 +02:00
helgeerbe
a1b3bdfee8 Merge remote-tracking branch 'tbnobody/OpenDTU/master' into development 2023-04-18 12:09:22 +02:00
Thomas Basler
5d2656550c Optimize detection if RF module is configured 
Use PinMapping method instead of dedicated method in Hoymiles lib --> Same result but reduces variables
 2023-04-17 23:19:53 +02:00
Thomas Basler
59f43a82a8 BREAKING CHANGE: Web API Endpoint /api/devinfo/status requires GET parameter inv= 
Only the requested inverter is sent to the client. This reduces the size of the json response --> Less memory.

It should also fix #814.
 2023-04-17 21:48:16 +02:00
Thomas Basler
af3a277e30 Introduced HoymilesRadio property to determine if a configuration attempt was done 2023-04-17 18:59:56 +02:00
helgeerbe
40cee1f9ca Merge remote-tracking branch 'tbnobody/OpenDTU/master' into development 2023-04-17 11:08:55 +02:00
MalteSchm
3504924bb0 Changing SPI interface 2023-04-16 18:34:09 +02:00
MalteSchm
4ddaa7643b make sure that PL is enabled if user uses webinterface 2023-04-16 18:30:21 +02:00
MalteSchm
a306bc1351 Bugfix for Mqtt enable / disable (was float, uses int now) 2023-04-16 18:28:09 +02:00
Thomas Basler
15156b4b87 Set CMT frequency only if a valid pin config was found 2023-04-15 10:55:48 +02:00
Thomas Basler
c3368450f6 Initialize spiClass only if valid pin config was found 2023-04-15 10:55:48 +02:00
Thomas Basler
50ce7f014d Expose min and max frequency in HoymilesRadio_CMT 2023-04-15 10:55:48 +02:00
Thomas Basler
371e405eed Added configuration of CMT modules frequency to webapp 2023-04-15 10:55:48 +02:00
Thomas Basler
996404ceed Introduce gpio2 for the CMT2300A module 
This implements the sending interrupt instead of polling. On the other hand, gpio3 is made optional.
 2023-04-15 10:55:48 +02:00
Thomas Basler
854fcdaeae Allow configuration of the TX PA Level of the CMT2300A module 2023-04-15 10:55:48 +02:00
Thomas Basler
3e1b778565 Change max power limit from 1500W to 2250W to support HMS/HMT inverters 2023-04-15 10:55:47 +02:00
Thomas Basler
0ec90e0000 webapp: Adjusted radio problem hint in home view to detect problems of nrf and cmt radios 2023-04-15 10:55:47 +02:00
Thomas Basler
c19d2007bd webapp: Added cmt radio status to system overview 2023-04-15 10:55:47 +02:00
Thomas Basler
de2b7ab2d2 Check that all RF modules as in idle mode before sending mqtt packages 2023-04-15 10:55:47 +02:00
Thomas Basler
b7fb294368 Set DTU serial for CMT modules 2023-04-15 10:55:47 +02:00
Thomas Basler
ef614751b1 webapp: Show CMT pins in device manager 2023-04-15 10:55:47 +02:00
Thomas Basler
45882543b6 Allow dynamic pin mapping for CMT module 2023-04-15 10:55:47 +02:00
Thomas Basler
8404dd57a7 Add a HoymilesRadio base class 
This enables to have multiple radio implementations while the inverter classes just refere to the base class
 2023-04-15 10:55:47 +02:00
Thomas Basler
a7e9aaa862 Move reference to the radio instance into the inverter instance 
This is required to support different radios for different inverters
 2023-04-15 10:55:47 +02:00
helgeerbe
1dc73f91ee Merge remote-tracking branch 'tbnobody/OpenDTU/master' into development 2023-04-13 10:18:49 +02:00
MalteSchm
690025e5fd fixing a bug from merging and remove a leftover debug message 2023-04-13 10:06:06 +02:00
MalteSchm
be7a43fbfb Removing un-necessary timestamp, commenting code and cleanups 2023-04-13 09:47:12 +02:00
MalteSchm
01849dc90a adding Mqtt handling to main.cpp 2023-04-13 09:47:10 +02:00
MalteSchm
ee376827fd merging functionality from PL refactor 2023-04-13 09:47:07 +02:00
MalteSchm
9999fa28e8 refactor state machine 
merging
 2023-04-13 09:46:35 +02:00
MalteSchm
ee82c8c9b8 adding option to disable power limiter via mqtt 
adding option to disable power limiter via mqtt - adding missing file
 2023-04-13 09:44:48 +02:00
MalteSchm
9efe076cc2 resolving merge conflict 
adding missing statement from merge

fixing a bug introduced in merge
 2023-04-13 09:39:04 +02:00
MalteSchm
fc5089e70b resolving merge conflict 2023-04-13 09:36:00 +02:00
qubeck
b79619bf8b add explicit checks to avoid potential div. by zero on application of artificially increased power limit if channel power becomes zero 2023-04-12 20:44:38 +02:00
Martin Dummer
bea0a738c1
include/Configuration.h: rename MQTT_MAX_ROOT_CA_CERT_STRLEN 
rename const MQTT_MAX_ROOT_CA_CERT_STRLEN to more generic name MQTT_MAX_CERT_STRLEN

Signed-off-by: Martin Dummer <martin.dummer@gmx.net>
 2023-04-12 11:58:27 +02:00
Martin Dummer
d920726a76
src/WebApi_mqtt.cpp: rename function getRootCaCertInfo 
rename function WebApiMqttClass::getRootCaCertInfo to more generic
name WebApiMqttClass::getTlsCertInfo

Signed-off-by: Martin Dummer <martin.dummer@gmx.net>
 2023-04-12 08:47:24 +02:00
Martin Dummer
0db4b5f226
Fix: src/WebApi_mqtt.cpp: typos in error messages 
Signed-off-by: Martin Dummer <martin.dummer@gmx.net>
 2023-04-12 08:37:49 +02:00
Martin Dummer
971ae6d1be
Feature: MQTT add TLS authentication 
User asked for TLS client certificate based login from DTU to MQTT
server. This PR implements storage and use of x509 client certificate
and private key.

Signed-off-by: Martin Dummer <martin.dummer@gmx.net>
 2023-04-12 08:33:10 +02:00
MalteSchm
2d7115e1e8 typo 2023-04-11 18:58:18 +02:00
MalteSchm
f6d0b0997f typo 2023-04-11 18:57:57 +02:00
berni2288
19b2dd4c7a
PowerMeter: Whitespace and {} fixes 2023-04-07 20:22:35 +02:00
qubeck
00def1d8d1
Generic SML based power meters support (#146) 
* add support for energy & power readings on SML based power meters, taking OBIS 16.7.1 for power (using mod. SML Parser lib. by olliiiver)

* switched SML read to use software serial

* made total power meter response controled by meter source to obtain either the sum of phase powers or explicit total power provided by meter

* made mqtt subscriptions to power meter topics meter source dependend

* simplified SML read loop and OBIS handler registration, + minor refactoring

* minor cleanup/style changes and optim. PowerMeter

* fixed build, add SOURCE_SML == 4

* removed optional usage of HW serial for SML power meter

* switched to usage of _powerMeter1Power for SML power reading to allign better with existing code

---------

Co-authored-by: helgeerbe <helge@erbehome.de>
 2023-04-07 20:20:00 +02:00
helgeerbe
e29708f871 fix infinite state switch if battery is above 
startThreshold and solar passtrhough is enabled
 2023-04-06 18:32:50 +02:00
helgeerbe
ef51d75f2c Merge remote-tracking branch 'tbnobody/OpenDTU/master' into development 2023-04-06 10:46:02 +02:00
berni2288
09fb0618b4
Merge branch 'MalteSchm-webinterface_summary_updates' into development 2023-04-05 22:27:17 +02:00
Thomas Basler
ede572f6e3 Status LED's: Implemented 
They can be activated using device profiles.
 2023-04-05 11:56:59 +02:00
Thomas Basler
ca0b8e9afc Remove not required F() macro. Frees ~20kb flash. 2023-04-05 11:54:50 +02:00
Thomas Basler
dab5b4d723 webapp: Show inverter status in grey if polling is disabled (e.g. at night) 2023-04-05 11:52:35 +02:00
Thomas Basler
d501c4b836 Uses VSPI instead of HSPI and compatibility for C3, S2 and S3 MCUs 2023-04-05 11:51:09 +02:00
Thomas Basler
7d50fa373e Allow use GPIO0 as NRF pins 2023-04-05 11:51:09 +02:00
MalteSchm
801ad469c5 corrected day yield 2023-04-05 10:51:07 +02:00
Bernhard Kaszt
8ca664a8fe
Use AC power for limit calculation (= Support directly connected PV panels with Power Limiter) (#154) 
* Power limiter: Use the actual AC power for limit calculation

instead of the last set limit.

In order support setups without battery connected (sources that don't exhaust the limit)
 2023-04-05 10:30:03 +02:00
helgeerbe
c0dff1e7df catch bad_alloc for Huawei and Pylontech WebApi_ws 2023-04-05 09:48:38 +02:00
MalteSchm
459f9ffc2c merging branches 2023-04-04 21:43:24 +02:00
MalteSchm
169ea3d5d5 Api extensions 2023-04-04 21:31:32 +02:00
MalteSchm
abffc38c11 fixing typos 2023-04-04 21:30:53 +02:00
Thomas Basler
ae323cd26f Status LED's: Implemented 
They can be activated using device profiles.
 2023-04-04 18:53:23 +02:00
Thomas Basler
d6028cbd50 Remove not required F() macro. Frees ~20kb flash. 2023-04-04 18:51:18 +02:00
helgeerbe
0c34554b9c don't set newPowerlimit if newLimit AND lastLimit in target window 2023-04-04 18:20:06 +02:00
helgeerbe
160b5b5b01 handle bad_alloc for vedirect status 2023-04-04 18:17:53 +02:00
qubeck
cd4a327671 limiting the artificialy increased power limit to inverter maximum power 2023-04-04 17:11:59 +02:00
Thomas Basler
acf413b616 webapp: Show inverter status in grey if polling is disabled (e.g. at night) 2023-04-03 22:25:32 +02:00
Bernhard Kaszt
e35254c8f2
New Power meter support: HTTP(S) + JSON (Shelly 3EM, Tasmota, Volkszähler etc.) (#153) 
* Implement HTTP(s) + JSON type Power Meter support

---------

Co-authored-by: Bernhard Kaszt <berni@bcserv.eu>
 2023-04-03 21:36:20 +02:00
qubeck
bd57d0f19a fixed casting issues 2023-04-02 22:26:44 +02:00
qubeck
a1da3f9842 producing DC channel aware artificial increase of applied power limit to mitigate fixed distribution of applied power limit across all channels 2023-04-02 22:13:43 +02:00
MalteSchm
20bb7fc372
Show (Pylontech) battery infos in Live View 
* adding data age to battery data

* Add battery enabled flag

* Webapi and websocket api for Battery

* Webinterface for battery

* fixed bug due to naming inconsistencies

* cleaned up rounding

* dist update

* change typename to uppercase

* reverting to original file
 2023-04-02 20:58:28 +02:00
MalteSchm
6b85b8d4a2 Merge remote-tracking branch 'upstream/development' into battery_webinterface 2023-04-02 14:28:37 +02:00
MalteSchm
78838585f7 fixed bug due to naming inconsistencies 2023-04-02 14:17:23 +02:00
MalteSchm
59c84bcb85 Webapi and websocket api for Battery 2023-04-02 13:00:46 +02:00
Bernhard Kaszt
4de043f3d4 Fix crash when AC charger is enabled but initialization fails 2023-04-02 10:46:07 +02:00
Bernhard Kaszt
c86c5133f0 Fix code style in Huawei files 2023-04-02 10:42:36 +02:00
MalteSchm
a0bbf61db2 Add battery enabled flag 2023-04-02 10:11:48 +02:00
MalteSchm
e514ef744b adding data age to battery data 2023-04-01 15:34:32 +02:00
MalteSchm
d1e43c11b9 Run Huawei code only when enabled 2023-04-01 14:43:24 +02:00
MalteSchm
1f6301c2c0 Check for empty MQTT topic 
Please enter the commit message for your changes. Lines starting
 2023-04-01 14:02:09 +02:00
MalteSchm
f4455ccb93 reverting 2023-04-01 13:50:04 +02:00
Thomas Basler
9b74badda8 Uses VSPI instead of HSPI and compatibility for C3, S2 and S3 MCUs 2023-03-30 23:24:11 +02:00
Thomas Basler
fe5d3e29e3 Allow use GPIO0 as NRF pins 2023-03-30 23:19:29 +02:00
MalteSchm
a091e80ed0 deal with un-initialized values 2023-03-29 19:07:16 +02:00
MalteSchm
a968f09d73 Pin config 2023-03-29 19:06:41 +02:00
MalteSchm
ece131995a linting errors 2023-03-29 19:04:41 +02:00
helgeerbe
b3c17c8ee8 Merge branch 'pr/MalteSchm/144' into development 2023-03-27 22:16:53 +02:00
helgeerbe
e0a80734f3 Merge remote-tracking branch 'tbnobody/OpenDTU/master' into development 2023-03-27 21:10:03 +02:00
MalteSchm
2aad13dc72 Changing SPI interface 2023-03-27 20:47:35 +02:00
MalteSchm
07ea03d12b fixing linting issue 2023-03-26 15:46:33 +02:00
MalteSchm
06d5da50a2 the implementation has used HSPI with the default VSPI pins for a long time. Change VSPI and HSPI to use the right pins in order to avoid confusing 2023-03-26 12:36:21 +02:00
MalteSchm
d80f62d1b9 disable Mqtt output when disabled 2023-03-26 12:13:06 +02:00
MalteSchm
26eedc9701 align mqtt format with the other sources 2023-03-26 11:56:41 +02:00
MalteSchm
89be653a51 inverse logic for power pin (active high) 2023-03-26 11:56:11 +02:00
MalteSchm
a4767827b4 merging master 2023-03-26 11:25:08 +02:00
MalteSchm
3b57550ead adding basic mqtt support 2023-03-26 11:02:40 +02:00
MalteSchm
bbf3d44d69 working with a reference 2023-03-26 11:01:32 +02:00
MalteSchm
0b5c47cd2e Adding enable/disable option and pin to control a switch/relais to power the Huawei PSU 2023-03-26 11:00:37 +02:00
helgeerbe
7d48e426dc free JsonDocument for livedata as soon as possible 2023-03-24 15:39:03 +01:00
MalteSchm
8576034b77 Adding Huawei CAN interface, web-api, websocket and Mqtt extensions to access the data 2023-03-24 10:03:22 +01:00
Thomas Basler
8d8c7f8a71 Fixed typo: Successfull --> Successful 2023-03-23 23:30:55 +01:00
Thomas Basler
21718a9e8f Fix #736: Check for payloads < 0 and ignore them 2023-03-23 21:18:00 +01:00
helgeerbe
3f8226c36c Merge remote-tracking branch 'tbnobody/OpenDTU/master' into development 2023-03-23 19:14:14 +01:00
helgeerbe
0832ef86e4 reboot after power meter settings 2023-03-23 19:10:29 +01:00
helgeerbe
55dc4dbdfc reinitialize mqqt subscription after reconnect 2023-03-22 17:47:15 +01:00
helgeerbe
5d5124dd5b fix last power meter update time 2023-03-22 14:53:36 +01:00
helgeerbe
a441a6eaf7 fix mqqt supscibe in power meter 2023-03-22 14:11:55 +01:00
helgeerbe
aaa9f5cd98 power meter settings were not restored. On reboot only default were set 2023-03-22 12:34:47 +01:00
helgeerbe
41da6d489d add missing webapi init for powermeter 2023-03-22 11:34:55 +01:00
Eugen
effd4e89ab
BF: get powerTotal from PowerMeter 2023-03-22 08:21:34 +01:00
Adminius
05a5b2367b PowerMeter Class + SDM PowerMeter support 2023-03-21 23:46:54 +01:00
Thomas Basler
ac73747a29 Fix #723: For some reason, a space was added before 1 digit numbers 2023-03-20 18:05:43 +01:00
helgeerbe
19252629cb minimum panel DC power 20W 2023-03-20 15:17:07 +01:00
helgeerbe
a6c852a82c if new limit too low, turn inverter off 
within state
 2023-03-20 12:35:29 +01:00
helgeerbe
2dc7089aa6 Start at night 2023-03-19 22:53:24 +01:00
helgeerbe
b9acbe6f2c off when newPowerLimit < lowerLimit 2023-03-18 23:50:34 +01:00
helgeerbe
06370baa0e Merge remote-tracking branch 'tbnobody/OpenDTU/master' into development 2023-03-18 22:42:05 +01:00
helgeerbe
c95468f972 fix comparison between int and double 2023-03-18 14:44:28 +01:00
Thomas Basler
75364f89cb Publish all valid digits via mqtt 2023-03-16 19:29:37 +01:00
helgeerbe
46ce6ad50f Implement battery drain strategies: 
- empty when full
- empty at night
 2023-03-16 17:48:22 +01:00
helgeerbe
32a96bbd06 change all watt related vars to 
int32_t to avoid cast problems with negativ values.
 2023-03-16 12:34:14 +01:00
helgeerbe
04c7e4fa01 fix cast error with unsigned int 
which results in wrong power limit settings if values become < 0 due
 to power export to the grid.
 2023-03-16 12:17:14 +01:00
Thomas Basler
2e33f5cd51 Display: Implement rotation setting and removed icons 2023-03-15 20:20:14 +01:00
helgeerbe
9214897245 for watt use uint32_t as std type to 
avoid cast problems to uint16_t
 2023-03-13 11:38:26 +01:00
Bernhard Kaszt
e95acbec46 PylontechCanReceiver.cpp: Cosmetic changes 2023-03-12 18:47:29 +01:00
MalteSchm
63c956af15 swap can library to better support newer ESPs 2023-03-12 17:27:41 +01:00
helgeerbe
01a2ffaed5 [Request] Show actual power limiter state in live view helgeerbe/OpenDTU-OnBattery#134 2023-03-10 16:29:00 +01:00
helgeerbe
43dc10b868 Merge branch 'inverter-settings' into development 2023-03-09 12:43:03 +01:00
helgeerbe
8df2c16cce ensure STATE_DISCOVER if PowerLimter is enabled 2023-03-09 10:22:08 +01:00
helgeerbe
418fea2cfc fix veStruct 
* PPV is int not double
* fix: initialize veStruct to 0 to avoid random data on startup
 2023-03-09 10:16:55 +01:00
helgeerbe
6f3e33c0b1 exit loop after turn inverter on or off 2023-03-08 22:11:01 +01:00
Bernhard Kaszt
a66f818e75 Hide Victron Ve.direct UI elements from Live page when disabled 
Resolves #91
 2023-03-08 19:54:19 +01:00
Markus Dobel
9eff5f228b feat: export panel settings (name, max power, offset) as prometheus metrics 2023-03-08 09:11:25 +01:00
helgeerbe
716fc867a1 powerLimiter with state machine 2023-03-07 21:04:19 +01:00
Bernhard Kaszt
06a0f76fed Fix local build working but Github build failing 2023-03-05 20:45:27 +01:00
Bernhard Kaszt
06fbdf1f12 Add Pylontech battery to device pin manager 2023-03-05 19:55:56 +01:00
Bernhard Kaszt
304d90062d Revert broken change in condition that sets _consumeSolarPowerOnly 
6709338dbd
 2023-03-05 16:30:53 +01:00
Bernhard Kaszt
a6e720f154 Powerlimiter: Remove MQTT Topic debug message 2023-03-05 15:41:21 +01:00
Bernhard Kaszt
804f225908 Fix _consumeSolarPowerOnly sometimes being set to false when it shouldn't 2023-03-05 13:32:18 +01:00
helgeerbe
b70407d7fe Initilise variables 2023-03-04 13:02:30 +01:00
helgeerbe
9391b11403 fix start inverter 2023-03-04 11:59:10 +01:00
helgeerbe
b7dda83545 use efficiency factor if limit is set to 
victronChargePower
 2023-03-03 20:34:11 +01:00
helgeerbe
cf4a35e148 fix starting and stopping inverter 2023-03-03 19:51:04 +01:00
helgeerbe
6709338dbd fix setting consumeSolarPowerOnly 2023-03-02 16:18:44 +01:00
helgeerbe
67a5217482 start inverter if power consumption greater or equal lower power limit 2023-03-02 14:27:42 +01:00
helgeerbe
3e38941b57 start inverter only if not exporting to grid 2023-03-01 13:34:27 +01:00
helgeerbe
6241a31e8c comment out full wifi scan 2023-03-01 12:09:53 +01:00
helgeerbe
4a51ae5038 victron charge power is integer 2023-03-01 10:23:37 +01:00
helgeerbe
26a8809121 stop inverter, if exporting power to grid 2023-02-28 13:09:10 +01:00
helgeerbe
3b62d5708a Merge remote-tracking branch 'tbnobody/OpenDTU/master' into development 2023-02-27 07:42:46 +01:00
Thomas Basler
4d18ccf01d Prometheus API: Only output the channels if they where read at least once 2023-02-26 19:31:37 +01:00
helgeerbe
e9fce49fee fix lint error 2023-02-25 22:23:05 +01:00
helgeerbe
32342dcd5d fix voltage threshhold to 2 decimal digits 2023-02-25 22:12:44 +01:00
helgeerbe
17dd9db946 set min target power consumption to 0 2023-02-25 20:17:25 +01:00
helgeerbe
3ed61319ad fix config read for power consumption 2023-02-25 18:58:41 +01:00
helgeerbe
1e968a1713 Add target for power consumption 2023-02-25 16:28:21 +01:00
helgeerbe
3f3540bd33 print ve.direct rx, tx pins on init 2023-02-25 15:29:00 +01:00
Thomas Basler
c67b3e3cbd Prometheus API: Set correct metrics type 2023-02-24 19:10:35 +01:00
helgeerbe
28b24d01ad implement UI for target power consumption 2023-02-24 16:13:32 +01:00
helgeerbe
cd7ece7caf fix hard coded channel settings 2023-02-24 10:45:59 +01:00
helgeerbe
10f907477d fix name for inverter id and channel id 2023-02-23 22:41:37 +01:00
helgeerbe
56151b0d12 make inverter and channel selectable 2023-02-23 21:46:59 +01:00
Thomas Basler
759f8b7208 Log errors if too less memory for webapi is available 2023-02-23 21:10:00 +01:00
helgeerbe
a2473645a5 Merge remote-tracking branch 'tbnobody/OpenDTU/master' into development 2023-02-23 12:01:34 +01:00
helgeerbe
1caeb1d88b fix logging for out of ressources 2023-02-23 09:46:24 +01:00
helgeerbe
a758d894f6 LiveService if out of ressources close websocket 2023-02-22 15:46:52 +01:00
helgeerbe
0f80a25937 send http 429 "Too Many Requets", 
if prometheus api is out of resources
 2023-02-22 14:13:17 +01:00
helgeerbe
1e7f6b8f0f first version 2023-02-21 22:06:47 +01:00
helgeerbe
30440472f7 fix lint errors 2023-02-20 21:04:43 +01:00
helgeerbe
f973de4ab6 aktivate prometheus interface 2023-02-20 21:00:07 +01:00
Thomas Basler
97bc964b6c Fix lint errors 2023-02-20 20:19:23 +01:00
Thomas Basler
c61064c891 Merge branch 'pr605' into dev 2023-02-20 19:38:23 +01:00
helgeerbe
f560f25302 initial merge of power_limiter * missing is inverter and channel setting in gui 
* due to bug _webApiPrometheus.init is commented out
 2023-02-20 15:56:02 +01:00
helgeerbe
07f4473a4e Connect Wifi to strongest AP 
* do full channel scan
  * connect to strongest AP
 2023-02-20 10:13:36 +01:00
helgeerbe
09942e8e18 Connect Wifi to strongest AP 
* do full channel scan
  * connect to strongest AP
 2023-02-20 09:52:40 +01:00
Thomas Basler
dc66a82695 Fix typo in configuration. Relates to #603 
Also increase buffer size to read whole config
 2023-02-19 22:33:35 +01:00
Thomas Basler
cd99ab8e42 Added settings to pause polling/sending commands in general and at night 2023-02-18 19:44:16 +01:00
Thomas Basler
b319c78dc1 Added methods to calculate and show sunrise and sunset times 2023-02-18 18:15:48 +01:00
Thomas Basler
19a1c0aa54 Added config parameters to set longitude and latitude 2023-02-18 16:53:28 +01:00
helgeerbe
ce752f0d75 Dont print that VeDirect data is unvalid 2023-02-17 15:08:31 +01:00
helgeerbe
6e0ae6d152 Extent JSON_BUFFER_SIZE 7000 2023-02-17 15:06:43 +01:00
helgeerbe
27f20a76f0 Merge remote-tracking branch 'tbnobody/OpenDTU/master' into development 2023-02-16 12:35:18 +01:00
helgeerbe
1a4a8cc921 fix age critical 2023-02-16 12:24:11 +01:00
helgeerbe
dc44cc8e1f create VeDirect.isDataValid() 2023-02-16 12:17:47 +01:00
Thomas Basler
6a6165e8c5 Fix #589: MQTT channel assignment in homeassistant config [unique_id and name] was wrong 2023-02-15 19:04:58 +01:00
helgeerbe
a529c91254 Merge remote-tracking branch 'tbnobody/OpenDTU/master' into development 2023-02-14 10:10:10 +01:00
helgeerbe
7022ed95b6 copy vedirect data if send only 
updated data is true
 2023-02-14 09:54:40 +01:00
Thomas Basler
8cbae76797 Implement offsets for YieldTotal (#549) 
This allows to enter a offset in kWh in the inverter properties which will be applied to the read Yield Total value of the inverter. Using this can set your total production to zero if you e.g. are using a used device.
 2023-02-13 20:25:00 +01:00
Thomas Basler
7bbb278eaf Merge branch 'mqtt_rework' into dev 2023-02-13 18:39:29 +01:00
Thomas Basler
f8c70c3e9f Added missing copyright header 2023-02-13 18:38:22 +01:00
Thomas Basler
3b7aef63f8 BREAKING CHANGE: Web API! 
In order to support multiple AC channels in future the WebAPI had to be changed. AC and DC channels are now grouped in a sub object containing the channels beginning with 0.
 2023-02-13 18:37:55 +01:00
helgeerbe
43bfee4d55 Stopp publishing vedirect if data becomes too old 2023-02-13 14:01:10 +01:00
helgeerbe
957bc91828 Force hass discovery update for vedirect 
if mqtt settings changes
 2023-02-13 12:00:25 +01:00
helgeerbe
17e564a094 simplify main for vedirect 2023-02-13 11:41:51 +01:00
helgeerbe
ed12f814dd mqqt hass discovery complete 2023-02-08 14:09:16 +01:00
helgeerbe
997023e52f Add Hass sensors Battery voltage and Current 2023-02-07 16:51:30 +01:00
helgeerbe
4f0a45c902 Add serial number to deviced name 2023-02-07 13:59:03 +01:00
helgeerbe
82ecf6cd6d Add victron serial to mqtt topics 2023-02-07 13:36:37 +01:00
Thomas Basler
ceaf08c1a0 Hoymiles Lib: Rename ChannelMaxPower to StringMaxPower 2023-02-06 19:56:12 +01:00
Thomas Basler
d4c838a16e BREAKING CHANGE: Prometheus API! 
Added additional field to the prometheus api which identifies a channel by it's type. That means that e.g. channel 0  exists for type AC and DC.

This commit also introduces a additional field in the statistics byte assignment table. This field identifies whether a channel is on the AC or DC side. MQTT and WebAPI is still compatible with the previous design.
 2023-02-06 19:51:10 +01:00
helgeerbe
37d3bb0eb0 vedirect hass autodiscovery: 
load output state as binary sensor
 2023-02-06 17:35:01 +01:00
helgeerbe
1c01e927f9 Add victron pins to device manager 2023-02-02 23:01:22 +01:00
helgeerbe
9e70d2dfc6 Merge remote-tracking branch 'tbnobody/OpenDTU/master' 2023-02-02 20:58:06 +01:00
Thomas Basler
5d7be32b90 Fixed typo 2023-01-31 18:35:50 +01:00
Thomas Basler
d948439beb Fix #548: The first device profile within the json file was not correctly applied 2023-01-30 20:33:55 +01:00
Thomas Basler
8bafb178a1 Fix #540: Do not output unit_of_meas if empty 2023-01-27 18:34:18 +01:00
helgeerbe
bec6c20531 Merge remote-tracking branch 'tbnobody/OpenDTU/master' 2023-01-26 10:30:55 +01:00
Thomas Basler
e89fd64439 Added WebAPI to setup display settings. Also reboot only if device profile was changed. 2023-01-20 18:28:34 +01:00
Thomas Basler
f7fb9a2bd6 Display: Add property to enable or disable the screensaver 2023-01-20 18:28:34 +01:00
Thomas Basler
d1483468c6 Rename Display properties and apply power safe immediatly 2023-01-20 18:28:33 +01:00
Thomas Basler
e3d2de0319 webapp: Show display pin mapping in device manager 2023-01-20 18:28:33 +01:00
Thomas Basler
b96d87b933 Read display pinmapping from json file 2023-01-20 18:28:33 +01:00
Thomas Basler
bb3e12814d Move display pin assignment to main function 2023-01-20 18:28:32 +01:00
Thomas Basler
592dd73fca Implement _dispX as function local variable 2023-01-20 18:28:23 +01:00
helgeerbe
9a7a0d293e Merge remote-tracking branch 'tbnobody/OpenDTU/master' 2023-01-20 14:54:04 +01:00
Thomas Basler
1d07574f8a Rename _lastPublish to _lastDisplayUpdate 2023-01-18 23:22:36 +01:00
Thomas Basler
e572e711a4 Code Style Changes 
* Add License Identifier
* Move non public required includes to cpp
* Add curly brackets
 2023-01-18 23:22:36 +01:00
dAjaY85
7074dd5757 Display init zum Zweiten 
chango to full Buffer Mode, remove picture loop,
because it's not worked.
look: https://github.com/olikraus/u8glib/wiki/tpictureloop

snprintf + public vars
- dispPowerSafe => true: PowerSafe Mode on
- dispLogo => true: showing Logo upper right corner
- dispContrast => possible to adjust the Display Contrast

change in date time, buffer deleted

Display-Constructor changed, reset goes to front

Arrow and Logo only shown, when production is on

Refactor OLEDDisplayClass to DisplayGraphicClass
 2023-01-18 23:22:36 +01:00
Thomas Basler
591a668901 Fixed issue when selecting new device profile 2023-01-17 20:46:52 +01:00
Thomas Basler
c85b99ffc1 Include ethernet handling in every build to enable it at runtime 2023-01-17 18:44:52 +01:00
Thomas Basler
19b42223f5 webapp: Show current active pin config 2023-01-16 23:41:58 +01:00
Thomas Basler
3d3feb3517 Allow Ethernet Pin Settings via json config 2023-01-16 22:26:35 +01:00
Thomas Basler
5f699f4927 Added Device Profiles 
Allows the pin assignment during runtime.
Pin settings will be read from a json file called "pin_mapping.json"
 2023-01-16 21:09:24 +01:00
Thomas Basler
af1a2a188e Extended config API to allow upload of individual files 2023-01-05 14:41:15 +01:00
Thomas Basler
20ae646561 webapp: Allow download of individual config files 2023-01-05 01:44:38 +01:00
Thomas Basler
7c33688167 Use same line ending in printf as in println 
This prevents mistakes in the webconsole
 2023-01-04 18:48:33 +01:00
helgeerbe
e49bbe0faf Merge remote-tracking branch 'tbnobody/OpenDTU/master' 2022-12-27 14:17:24 +01:00
Thomas Basler
5bc264f4d2 Introduce numeric error codes in power webapi 2022-12-24 00:01:55 +01:00
Thomas Basler
03ed626da6 Introduce numeric error codes in security webapi 2022-12-24 00:01:55 +01:00
Thomas Basler
6ad7e971b4 Introduce numeric error codes in ntp webapi 2022-12-24 00:01:55 +01:00
Thomas Basler
3e8c7a4c10 Introduce numeric error codes in network webapi 2022-12-24 00:01:54 +01:00
Thomas Basler
8e9680f394 Introduce numeric error codes in mqtt webapi 2022-12-24 00:01:54 +01:00
Thomas Basler
af93e5d77e Introduce numeric error codes in maintenance webapi 2022-12-24 00:01:54 +01:00
Thomas Basler
9fd044f74f Introduce numeric error codes in limit webapi 2022-12-24 00:01:54 +01:00
Thomas Basler
4dc50777ef Introduce numeric error codes in inverter webapi 2022-12-24 00:01:54 +01:00
Thomas Basler
98b0a23ea0 Introduce numeric error codes in config webapi 2022-12-24 00:01:54 +01:00
Thomas Basler
3b5ff1691e Introduce numeric error codes in dtu webapi 2022-12-24 00:01:54 +01:00
Thomas Basler
8f5d394f3a Added websocket for debug output 2022-12-19 21:38:39 +01:00
Thomas Basler
8b60c29667 Replace all Serial by MessageOutput 2022-12-19 21:38:39 +01:00
Thomas Basler
cd5d5edd5f Implemented class to send debug output to uart as well as to websocket 2022-12-19 21:38:39 +01:00
Thomas Basler
5feefed14e Added missing copyright information 2022-12-14 22:37:37 +01:00
Thomas Basler
54d94af487 Cleanup includes 2022-12-14 22:13:03 +01:00
Thomas Basler
36477eab49 Fixed prometheus mac address when running in ethernet mode 2022-12-14 21:12:56 +01:00
Thomas Basler
674ead1c38 Fixed Hass device IP when running in ethernet mode 2022-12-14 21:11:53 +01:00
Thomas Basler
91f79fea19 Move publishHass method to MqttHandleHassClass 2022-12-14 21:08:35 +01:00
Thomas Basler
113caf510f Introduce generic mqtt publish method 
Allows publish of mqtt topics from other modules
 2022-12-14 20:58:57 +01:00
Thomas Basler
5dd4d5b452 Introduce MqttSubscribeParser and moved inverter specific subscribes to MqttHandleInverterClass 
This allows individual callback functions for each subscribed topic. Allows easier implementation of further mqtt functions
 2022-12-14 20:42:23 +01:00
Thomas Basler
aab72fd0d8 Move mqtt dtu topic publishing to separate class 2022-12-14 19:32:24 +01:00
Thomas Basler
723a2c6dbe Rename MqttPublishing to MqttHandleInverter 2022-12-14 19:13:34 +01:00
Thomas Basler
5dde17c56b Renamed MqttHassPublishing to MqttHandleHass 2022-12-14 19:07:11 +01:00
helgeerbe
df5cde2e82 Merge remote-tracking branch 'tbnobody/OpenDTU/master' 2022-12-05 11:46:31 +01:00
Thomas Basler
e8c517f650 Fix timezone specific issue when syncing time manually 
Time was off by one hour when using the sync button in the web UI.
tm_isdst = -1 means that mktime determines the DST flag based on the current timezone
 2022-11-29 22:55:14 +01:00
Thomas Basler
40203f7316 Fix #387: Allow a little bit more loss before HASS shows unavailable 2022-11-28 18:34:39 +01:00
Thomas Basler
36abaeee12 Moved pin assignment outside the hoymiles library 
Allows setting the pins during runtime and not  just using the defines
 2022-11-27 12:07:25 +01:00
helgeerbe
ae414c42c1 merge with remote master 2022-11-26 16:31:41 +01:00
helgeerbe
2109520bde Merge remote-tracking branch 'tbnobody/OpenDTU/master' 2022-11-26 16:31:16 +01:00
Thomas Basler
2a19b46d52 Add authentication to websocket 2022-11-23 21:00:54 +01:00
Thomas Basler
510f0c59f9 Implement readonly security for API endpoints 2022-11-22 23:40:19 +01:00
Thomas Basler
4bdbcbccc5 Introduce configuration option to decide wether the web ui is accessable without password or not 2022-11-22 23:32:52 +01:00
helgeerbe
1fc0e76c41 Merge remote-tracking branch 'tbnobody/OpenDTU/master' 2022-11-22 17:10:53 +01:00
Thomas Basler
e60619b867 Added device reboot functionality 2022-11-21 23:29:57 +01:00
Thomas Basler
f8b601f871 Show several hints and tips at Live View 
This contains the following information:
* No connection to the NRF module possible
* No time set
* Default password used
 2022-11-20 15:08:36 +01:00
helgeerbe
2c6dff3714 Password protection for vedirect settings API 2022-11-19 14:34:59 +01:00
helgeerbe
f35395e76f Merge remote-tracking branch 'tbnobody/OpenDTU/master' 2022-11-16 16:39:01 +01:00
Thomas Basler
fec84fd048 Show custom string name in Live View 2022-11-15 22:31:04 +01:00
Thomas Basler
134db887c0 Publish string names via MQTT 2022-11-15 22:31:04 +01:00
Thomas Basler
d28fadbdac Extended configuration to allow string names 
* Current config will be migrated to new format
* Already extended web API to get/post new format
 2022-11-15 22:31:04 +01:00
Thomas Basler
daf847e7b3 BREAKING CHANGE: Removed deprecated config parsing method 
After this commit its not possible to migrate from the old binary blob config to the new json based config!! If you still running a old version before 12. October please upgrade to a version before this commit.
See https://github.com/tbnobody/OpenDTU/discussions/285
 2022-11-15 22:31:04 +01:00
Thomas Basler
5f55414c0a Show Irradiation only in Live Data View if configured for specific channel 2022-11-15 22:31:04 +01:00
Thomas Basler
dd7babb448 Added a timeout of 5ms to detect current time. 
This prevents false positives when a interrupt occours during the reading of the time
 2022-11-14 20:19:38 +01:00
Thomas Basler
c2f59427b8 Prometheus API: Increase buffer size to allow more inverters 2022-11-10 20:20:55 +01:00
Thomas Basler
d7bcce947e Prometheus API: Adjust api url and method names 2022-11-10 20:20:54 +01:00
Thomas Basler
d62c5b239f Prometheus API: use integrated serialString() method to fetch serial number 2022-11-10 20:20:53 +01:00
Thomas Basler
8e4e055930 Prometheus API: Remove duplicate cache control 2022-11-10 20:20:52 +01:00
Thomas Basler
0fdf7f19e4 Prometheus API: Applied code formatting 2022-11-10 20:20:45 +01:00
Dominik Westner
e5bbb7f517 implemented prometheus metrics 2022-11-10 18:00:13 +01:00
Thomas Basler
e0b069ff3d Password protection for limit/power settings API 2022-11-08 18:34:00 +01:00
Thomas Basler
ab0029d9fd Show the correct amount of string input fields in inverter config 2022-11-07 22:38:53 +01:00
Thomas Basler
f163e239d2 Fix #303: Add inverter name as prefix to HASS auto discovery 2022-11-07 19:35:29 +01:00
Thomas Basler
233efe3a50 Password protection for firmware update API 2022-11-07 19:02:07 +01:00
Thomas Basler
fe8b68d2be Password protection for config settings API 2022-11-07 18:48:02 +01:00
Thomas Basler
a646eae51a Password protection for inverter settings API 2022-11-03 21:44:01 +01:00
Thomas Basler
902e632f51 Password protection for mqtt settings API 2022-11-03 21:31:50 +01:00
Thomas Basler
3a2f73a2b3 Password protection for ntp settings API 2022-11-03 21:20:12 +01:00
Thomas Basler
e605e42c3e Password protection for network settings API 2022-11-03 21:13:42 +01:00
Thomas Basler
b9d2978bf9 Password protection for dtu settings 2022-11-03 21:05:51 +01:00
Thomas Basler
8d14dbd367 Password protection for security settings API 
Also implemented the base functionallity to protect further API endpoints.
 2022-11-03 21:00:13 +01:00
helgeerbe
b3295f5f33 Merge remote-tracking branch 'tbnobody/OpenDTU/master' 2022-11-03 09:27:56 +01:00
Thomas Basler
438ce36bab Added sum values of all inverters to web UI 2022-11-01 16:33:20 +01:00
Thomas Basler
69b675bc64 BREAKING CHANGE: Structure WebAPI /api/livedata/status changed 
The different inverter data are now in a subobject called "inverters".
This is required to extend the API by other data then the inverter values
 2022-11-01 15:04:05 +01:00
Thomas Basler
f854cdff03 Init last_update with 0 instead of current time 2022-11-01 13:23:29 +01:00
Thomas Basler
b96f0c4dbe Introduce last_update MQTT topic 
Shows the timestamp of the last successfull statistics data from the specific inverter
 2022-10-31 14:38:10 +01:00
helgeerbe
6b4129c400 Merge remote-tracking branch 'tbnobody/OpenDTU/master' 2022-10-31 14:37:44 +01:00
Thomas Basler
4049f6bdb7 Implemented method to get the amount of relevant digits 2022-10-31 11:51:08 +01:00
Thomas Basler
f2a08ba503 Rename FLD_PCT to FLD_PF and assign UNIT_NONE 2022-10-31 00:43:07 +01:00
Thomas Basler
f741fea333 Move serial number formatting to inverter class 2022-10-29 11:22:56 +02:00