/*
;---------------------------------------
;  CMT2300A Configuration File
;  Generated by CMOSTEK RFPDK 1.46
;  2023.03.17 23:16
;---------------------------------------
; Mode                      = Advanced
; Part Number               = CMT2300A
; Frequency                 = 860.000 MHz
; Xtal Frequency            = 26.0000 MHz
; Demodulation              = GFSK
; AGC                       = On
; Data Rate                 = 20.0 kbps
; Deviation                 = 20.0 kHz
; Tx Xtal Tol.              = 20 ppm
; Rx Xtal Tol.              = 20 ppm
; TRx Matching Network Type = 20 dBm
; Tx Power                  = +13 dBm
; Gaussian BT               = 0.5
; Bandwidth                 = Auto-Select kHz
; CDR Type                  = Counting
; CDR DR Range              = NA
; AFC                       = On
; AFC Method                = Auto-Select
; Data Representation       = 0:F-low 1:F-high
; Rx Duty-Cycle             = Off
; Tx Duty-Cycle             = Off
; Sleep Timer               = Off
; Sleep Time                = NA
; Rx Timer                  = Off
; Rx Time T1                = NA
; Rx Time T2                = NA
; Rx Exit State             = STBY
; Tx Exit State             = STBY
; SLP Mode                  = Disable
; RSSI Valid Source         = PJD
; PJD Window                = 8 Jumps
; LFOSC Calibration         = On
; Xtal Stable Time          = 155 us
; RSSI Compare TH           = NA
; Data Mode                 = Packet
; Whitening                 = Disable
; Whiten Type               = NA
; Whiten Seed Type          = NA
; Whiten Seed               = NA
; Manchester                = Disable
; Manchester Type           = NA
; FEC                       = Enable
; FEC Type                  = x^3+x^2+1
; Tx Prefix Type            = 0
; Tx Packet Number          = 1
; Tx Packet Gap             = 32
; Packet Type               = Variable Length
; Node-Length Position      = First Node, then Length
; Payload Bit Order         = Start from msb
; Preamble Rx Size          = 2
; Preamble Tx Size          = 30
; Preamble Value            = 170
; Preamble Unit             = 8-bit
; Sync Size                 = 4-byte
; Sync Value                = 1296587336
; Sync Tolerance            = None
; Sync Manchester           = Disable
; Node ID Size              = NA
; Node ID Value             = NA
; Node ID Mode              = None
; Node ID Err Mask          = Disable
; Node ID Free              = Disable
; Payload Length            = 32
; CRC Options               = IBM-16
; CRC Seed                  = 0 crc_seed
; CRC Range                 = Entire Payload
; CRC Swap                  = Start from MSB
; CRC Bit Invert            = Normal
; CRC Bit Order             = Start from bit 15
; Dout Mute                 = Off
; Dout Adjust Mode          = Disable
; Dout Adjust Percentage    = NA
; Collision Detect          = Off
; Collision Detect Offset   = NA
; RSSI Detect Mode          = At PREAM_OK
; RSSI Filter Setting       = 32-tap
; RF Performance            = High
; LBD Threshold             = 2.4 V
; RSSI Offset               = 0
; RSSI Offset Sign          = 0
*/
#ifndef __CMT2300A_PARAMS_860_H
#define __CMT2300A_PARAMS_860_H

#include "cmt2300a_defs.h"
#include <stdint.h>

#define CMT_BASE_FREQ_860 860000000

/* [CMT Bank] with RSSI offset of +- 0 (and Tx power double bit not set) */
static uint8_t g_cmt2300aCmtBank_860[CMT2300A_CMT_BANK_SIZE] = {
0x00,
0x66,
0xEC,
0x1C,
0x70,
0x80,
0x14,
0x08,
0x11,
0x02,
0x02,
0x00,
};

/* [System Bank] */
static uint8_t g_cmt2300aSystemBank_860[CMT2300A_SYSTEM_BANK_SIZE] = {
0xAE,
0xE0,
0x35,
0x00,
0x00,
0xF4,
0x10,
0xE2,
0x42,
0x20,
0x0C,
0x81,
};

/* [Frequency Bank] 860 MHz */
static uint8_t g_cmt2300aFrequencyBank_860[CMT2300A_FREQUENCY_BANK_SIZE] = {
0x42,
0x32,
0xCF,
0x82,
0x42,
0x27,
0x76,
0x12,
};

/* [Data Rate Bank] */
static uint8_t g_cmt2300aDataRateBank_860[CMT2300A_DATA_RATE_BANK_SIZE] = {
0xA6,
0xC9,
0x20,
0x20,
0xD2,
0x35,
0x0C,
0x0A,
0x9F,
0x4B,
0x29,
0x29,
0xC0,
0x14,
0x05,
0x53,
0x10,
0x00,
0xB4,
0x00,
0x00,
0x01,
0x00,
0x00,
};

/* [Baseband Bank] - EU */
static uint8_t g_cmt2300aBasebandBank_860[CMT2300A_BASEBAND_BANK_SIZE] = {
0x12,
0x1E,
0x00,
0xAA,
0x06,
0x00,
0x00,
0x00,
0x00,
0x48,
0x5A,
0x48,
0x4D,
0x01,
0x1F,
0x00,
0x00,
0x00,
0x00,
0x00,
0xC3,
0x00,
0x00,
0x60,
0xFF,
0x00,
0x00,
0x1F,
0x10,
};

/* [Tx Bank] 13 dBm */
static uint8_t g_cmt2300aTxBank_860[CMT2300A_TX_BANK_SIZE] = {
0x70,
0x4D,
0x06,
0x00,
0x07,
0x50,
0x00,
0x53,
0x09,
0x3F,
0x7F,
};

#endif