From b177bd48801ec3e9cf1744a64b61103671c38407 Mon Sep 17 00:00:00 2001 From: polarbearing Date: Fri, 30 Dec 2022 23:03:35 +0100 Subject: [PATCH] README.md: hint that there are two mac addresses --- README.md | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/README.md b/README.md index 49b116d..fb1edd5 100644 --- a/README.md +++ b/README.md @@ -182,7 +182,8 @@ Users report that [ESP_Flasher](https://github.com/Jason2866/ESP_Flasher/release * After the initial flashing of the microcontroller, an Access Point called "OpenDTU-*" is opened. The default password is "openDTU42". * Use a web browser to open the address [http://192.168.4.1](http://192.168.4.1) * Navigate to Settings --> Network Settings and enter your WiFi credentials. The username to access the config menu is "admin" and the password the same as for accessing the Access Point (default: "openDTU42"). -* OpenDTU then simultaneously connects to your WiFi AP with this credentials. Navigate to Info --> Network and look into section "Network Interface (Station)" for the IP address received via DHCP. +* OpenDTU then simultaneously connects to your WiFi AP with these credentials. Navigate to Info --> Network and look into section "Network Interface (Station)" for the IP address received via DHCP. +* If your WiFi AP uses an allow-list for MAC-addresses, please be aware that the ESP32 has two different MAC addresses for its AP and client modes, they are also listed at Info --> Network. * When OpenDTU is connected to a configured WiFI AP, the "OpenDTU-*" Access Point is closed after 3 minutes. * OpenDTU needs access to a working NTP server to get the current date & time. Both are sent to the inverter with each request. Default NTP server is pool.ntp.org. If your network has different requirements please change accordingly (Settings --> NTP Settings). * Add your inverter in the inverter settings (Settings --> Inverter Settings)