patrick/OpenDTU-old
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
a5ba24fdd8
OpenDTU-old/platformio.ini
Bernhard Kirchen 2cc086335f BREAKING CHANGE: repartition: double sketch size 
this updates the partition scheme for devices with 4 MB of flash memory
to have only a single app partition, doubling its size, but sacrificing
their OTA update capability. the replacement environment for
"generic_esop32" is called "generic_esp32_4mb_no_ota".

the new default partition scheme is targeted for devices with at least 8
MB of flash memory. the previous two app partitions are merged into one,
and one additional app partition of the same new size is added to the
back of the table. the change preserves the littlefs partition (position
and size), allowing for upgrades without loosing the configuration.

another new environment is added, called "generic_esp32_8mb", which uses
the new default partition layout.

environment "generic" is removed. it was merely a variant of
"generic_esp32" with some pins pre-defined. we want users to install a
pin_mapping.json and use the generic firmwares.

environments for boards that have no version with at least 8 MB of flash
memory are setup using the 4 MB partition layout (no OTA updates).

all users must flash the factory.bin for their respective environment
using esptool (or compatible software) using the USB port of their
board. in other words: updating to the new partition scheme using an OTA
update is NOT possible.

hint: the ESP32-S3 builds have a smaller code footprint. this means
ESP32-S3 boards can be updated using OTA without updating the partition
layout on the devices for some unspecified time longer, i.e., until
their firmware binary actually becomes too large for the old sketch
partition size.

the non-factory binary for generic_esp32_4mb_no_ota is NOT collected as
an artifact. going forward, users must update using the factory binary
and using the USB connection to their boards.
2024-06-24 21:39:31 +02:00

266 lines
6.8 KiB
INI
Raw Blame History

; PlatformIO Project Configuration File
;
; Build options: build flags, source filter
; Upload options: custom upload port, speed and extra flags
; Library options: dependencies, extra library storages
; Advanced options: extra scripting
;
; Please visit documentation for the other options and examples
; https://docs.platformio.org/page/projectconf.html
[platformio]
default_envs = generic_esp32s3_usb
extra_configs =
platformio_override.ini
[env]
; Make sure to NOT add any spaces in the custom_ci_action property
; (also the position in the file is important)
custom_ci_action = generic_esp32_4mb_no_ota,generic_esp32_8mb,generic_esp32s3,generic_esp32s3_usb
framework = arduino
platform = espressif32@6.7.0
build_flags =
-DPIOENV=\"$PIOENV\"
-D_TASK_STD_FUNCTION=1
-D_TASK_THREAD_SAFE=1
-DCONFIG_ASYNC_TCP_EVENT_QUEUE_SIZE=128
-DCONFIG_ASYNC_TCP_QUEUE_SIZE=128
-Wall -Wextra -Wunused -Wmisleading-indentation -Wduplicated-cond -Wlogical-op -Wnull-dereference
; Have to remove -Werror because of
; https://github.com/espressif/arduino-esp32/issues/9044 and
; https://github.com/espressif/arduino-esp32/issues/9045
; -Werror
-std=c++17
-std=gnu++17
build_unflags =
-std=gnu++11
lib_deps =
mathieucarbou/ESP Async WebServer @ 2.10.8
bblanchon/ArduinoJson @ 7.0.4
https://github.com/bertmelis/espMqttClient.git#v1.7.0
nrf24/RF24 @ 1.4.8
olikraus/U8g2 @ 2.35.19
buelowp/sunset @ 1.1.7
https://github.com/arkhipenko/TaskScheduler#testing
https://github.com/coryjfowler/MCP_CAN_lib
plerup/EspSoftwareSerial @ ^8.0.1
https://github.com/dok-net/ghostl @ ^1.0.1
extra_scripts =
pre:pio-scripts/auto_firmware_version.py
pre:pio-scripts/patch_apply.py
post:pio-scripts/create_factory_bin.py
board_build.partitions = partitions_custom_8mb.csv
board_build.filesystem = littlefs
board_build.embed_files =
webapp_dist/index.html.gz
webapp_dist/zones.json.gz
webapp_dist/favicon.ico
webapp_dist/favicon.png
webapp_dist/js/app.js.gz
webapp_dist/site.webmanifest
custom_patches =
monitor_filters = esp32_exception_decoder, time, log2file, colorize
monitor_speed = 115200
upload_protocol = esptool
; Specify port in platformio_override.ini. Comment out (add ; in front of line) to use auto detection.
; monitor_port = COM4
; upload_port = COM4
[env:generic_esp32_4mb_no_ota]
board = esp32dev
build_flags = ${env.build_flags}
board_build.partitions = partitions_custom_4mb.csv
[env:generic_esp32_8mb]
board = esp32dev
build_flags = ${env.build_flags}
[env:generic_esp32_16mb_psram]
board = esp32dev
board_build.flash_mode = qio
board_build.partitions = partitions_custom_16mb.csv
board_upload.flash_size = 16MB
build_flags = ${env.build_flags}
-DBOARD_HAS_PSRAM
-mfix-esp32-psram-cache-issue
[env:generic_esp32c3]
board = esp32-c3-devkitc-02
board_build.partitions = partitions_custom_4mb.csv
custom_patches = ${env.custom_patches}
build_flags = ${env.build_flags}
[env:generic_esp32c3_usb]
board = esp32-c3-devkitc-02
board_build.partitions = partitions_custom_4mb.csv
custom_patches = ${env.custom_patches}
build_flags = ${env.build_flags}
-DARDUINO_USB_MODE=1
-DARDUINO_USB_CDC_ON_BOOT=1
[env:generic_esp32s3]
board = esp32-s3-devkitc-1
build_flags = ${env.build_flags}
[env:generic_esp32s3_usb]
board = esp32-s3-devkitc-1
upload_protocol = esp-builtin
build_flags = ${env.build_flags}
-DARDUINO_USB_MODE=1
-DARDUINO_USB_CDC_ON_BOOT=1
[env:olimex_esp32_poe]
; https://www.olimex.com/Products/IoT/ESP32/ESP32-POE/open-source-hardware
board = esp32-poe
build_flags = ${env.build_flags}
-DHOYMILES_PIN_MISO=15
-DHOYMILES_PIN_MOSI=2
-DHOYMILES_PIN_SCLK=14
-DHOYMILES_PIN_IRQ=13
-DHOYMILES_PIN_CE=16
-DHOYMILES_PIN_CS=5
-DOPENDTU_ETHERNET
[env:olimex_esp32_evb]
; https://www.olimex.com/Products/IoT/ESP32/ESP32-EVB/open-source-hardware
board = esp32-evb
board_build.partitions = partitions_custom_4mb.csv
build_flags = ${env.build_flags}
-DHOYMILES_PIN_MISO=15
-DHOYMILES_PIN_MOSI=2
-DHOYMILES_PIN_SCLK=14
-DHOYMILES_PIN_IRQ=13
-DHOYMILES_PIN_CE=16
-DHOYMILES_PIN_CS=17
-DOPENDTU_ETHERNET
[env:d1_mini_esp32]
board = wemos_d1_mini32
board_build.partitions = partitions_custom_4mb.csv
build_flags =
${env.build_flags}
-DHOYMILES_PIN_MISO=19
-DHOYMILES_PIN_MOSI=23
-DHOYMILES_PIN_SCLK=18
-DHOYMILES_PIN_IRQ=16
-DHOYMILES_PIN_CE=17
-DHOYMILES_PIN_CS=5
-DVICTRON_PIN_TX=21
-DVICTRON_PIN_RX=22
-DPYLONTECH_PIN_RX=27
-DPYLONTECH_PIN_TX=14
-DHUAWEI_PIN_MISO=12
-DHUAWEI_PIN_MOSI=13
-DHUAWEI_PIN_SCLK=26
-DHUAWEI_PIN_IRQ=25
-DHUAWEI_PIN_CS=15
-DHUAWEI_PIN_POWER=33
[env:wt32_eth01]
; http://www.wireless-tag.com/portfolio/wt32-eth01/
board = wt32-eth01
board_build.partitions = partitions_custom_4mb.csv
build_flags = ${env.build_flags}
-DHOYMILES_PIN_MISO=4
-DHOYMILES_PIN_MOSI=2
-DHOYMILES_PIN_SCLK=32
-DHOYMILES_PIN_IRQ=33
-DHOYMILES_PIN_CE=14
-DHOYMILES_PIN_CS=15
-DOPENDTU_ETHERNET
[env:esp_s3_12k_kit]
; https://www.waveshare.com/wiki/NodeMCU-ESP-S3-12K-Kit
board = esp32-s3-devkitc-1
build_flags = ${env.build_flags}
-DHOYMILES_PIN_MISO=16
-DHOYMILES_PIN_MOSI=17
-DHOYMILES_PIN_SCLK=18
-DHOYMILES_PIN_IRQ=3
-DHOYMILES_PIN_CE=4
-DHOYMILES_PIN_CS=5
[env:lolin32_lite]
; https://www.makershop.de/plattformen/esp8266/wemos-lolin32/
; https://www.az-delivery.de/products/esp32-lolin-lolin32
board = lolin32_lite
board_build.partitions = partitions_custom_4mb.csv
build_flags = ${env.build_flags}
-DHOYMILES_PIN_MISO=19
-DHOYMILES_PIN_MOSI=23
-DHOYMILES_PIN_SCLK=18
-DHOYMILES_PIN_IRQ=16
-DHOYMILES_PIN_CE=17
-DHOYMILES_PIN_CS=5
[env:lolin_s2_mini]
board = lolin_s2_mini
board_build.partitions = partitions_custom_4mb.csv
build_flags = ${env.build_flags}
-DHOYMILES_PIN_MISO=13
-DHOYMILES_PIN_MOSI=11
-DHOYMILES_PIN_SCLK=12
-DHOYMILES_PIN_CS=10
-DHOYMILES_PIN_IRQ=4
-DHOYMILES_PIN_CE=5
[env:opendtufusionv1]
board = esp32-s3-devkitc-1
upload_protocol = esp-builtin
debug_tool = esp-builtin
debug_speed = 12000
build_flags = ${env.build_flags}
-DHOYMILES_PIN_MISO=48
-DHOYMILES_PIN_MOSI=35
-DHOYMILES_PIN_SCLK=36
-DHOYMILES_PIN_IRQ=47
-DHOYMILES_PIN_CE=38
-DHOYMILES_PIN_CS=37
-DLED0=17
-DLED1=18
-DARDUINO_USB_MODE=1
[env:opendtufusionv2]
board = esp32-s3-devkitc-1
upload_protocol = esp-builtin
debug_tool = esp-builtin
debug_speed = 12000
build_flags = ${env.build_flags}
-DHOYMILES_PIN_MISO=48
-DHOYMILES_PIN_MOSI=35
-DHOYMILES_PIN_SCLK=36
-DHOYMILES_PIN_IRQ=47
-DHOYMILES_PIN_CE=38
-DHOYMILES_PIN_CS=37
-DLED0=17
-DLED1=18
-DCMT_CLK=6
-DCMT_CS=4
-DCMT_FCS=21
-DCMT_GPIO2=3
-DCMT_GPIO3=8
-DCMT_SDIO=5
-DARDUINO_USB_MODE=1
-DARDUINO_USB_CDC_ON_BOOT=1
Reference in New Issue View Git Blame Copy Permalink