this method calls the overflowed() method on the respective
DynamicJsonDocument and prints a respective message if not all
data could be added to the DynamicJsonDocument.
in case the user defines the respective pins, an MPPT controller will be
setup and the websocket would previously publish its invalid data even
if no data at all was received. this lead to using an invalid index and
to publish a useless card. instead, skip those controllers.
if the connection to a controller breaks, it will always present as a
card in the live view with the respective serial number and the last
known data.
PLLIMIT would not (always) be part of the JSON string transmitted to the
web application and trip it. with the help of the ArduinoJson assistant,
new values to use in the response size calculation were introduced.
also, importantly, a constant offset was added for the DPL status and
the JSON structure sourrounding the MPPTs.
* updating the SoC or value shall also update the general timestamp, as
the latter is defined as "any value changed", which includes SoC and
voltage, of course.
* if the last update is not a valid timestamp at all, the
updateAvailable method must always return false, obviously.
on the "main" live data websocket this can happen if no
OnBattery-specific data is available to sent but the empty
JSON document is still sent, which trips the web application.
publishing null in the battery live data websocket also trips the web
application, which rightfully assumes a valid object if data is received
through the websocket.
determine the amount of controllers actually in use dynamically,
especially to avoid indices which are invalid, causing an error
to be printed, even though the user did not do anything wrong.
in your pin_mapping.json, add a powermeter object like this:
[
{
"name": "My Board",
...
"powermeter": {
"rx": <num>,
"tx": <num>,
"dere": <num>
},
...
}
]
the SML power meter requires the rx pin to be set. the SDM power meter
requires the rx and tx pins are set. the "dere" pin pin is optional and
if set, this pin controls the driver enable and receiver enable pins of
the RS485 transceiver. the SDM library handles this pin.
closes#771.
* remove/comment unused variables to avoid compiler warnings
* cleanups: fix indention and style, make variable private, implement
getters in header and make const.
* optimize message output: respect verbose logging setting. prefix
output with SMA_HM.
* use newly introduced mutex in PowerMeterClass also for SMA HomeManager
* refactor code for readibility, unindent where possible.
the SDM power meter (among others) writes the power consumption of three
phases in multiple steps. this change helps to prevent getTotalPower()
reading intermediate values, e.g., reading a new value for phase 1 but
old values for phase 2 and 3 since phase 2 is currently read.
cache the values, and write them all at once, protected by a mutex,
later.
closes#732.
this changeset refactors the web application's DPL settings view. the
DPL settings can be complex, and they shall be presented in a way that
allows users to comprehend their meaning. irrelevant settings are now
hidden or displayed dynamically based on the influencing settings.
* group SoC thresholds into their own card
* hide battery SoC thresholds if battery disabled. if the user did not
even enable the battery interface, battery SoC values will not be used
for DPL decisions. in that case we completely hide the respective
settings from the DPL admin view. this reduces the amount of settings
for new users and especially users who don't even have a battery in
their setup or have no BMS connected.
* group voltage thresholds and improve label texts
* fix load correction factor unit
* fix header (wording)
* group solar-passthrough settings in new card
* group inverter-related settings
* hide solar passthrough settings if VE.Direct is disabled. closes#662.
* completely disable form if any requirement is not met
* list available inverters by name and type. this makes it much more
convenient to select the right inverter, especially since the order of
the inverters in the web UI is decoupled from their position in the
internal array, which was used to select them previously. care was
taken that old configs select the same inverter after an update.
when editing the DPL settings, the selects an inverter from the newly
created drow-down list, and the respective old inverter is
pre-selected.
* disable form if no inverter is configured (config alert)
* make inverter input selection dynamic. adjust selection to actual
amount of channels for selected inverter. skip selection altogether if
inverter has only one channel, or if it is solar powered.
* web app: wording adjustments
* group meta data into new property and exclude from submission. saves
memory when evaluating the submitted settings.
* hide irrelevant settings if inverter is solar-powered
* move restart hour setting to inverter card. translate setting which
disabled automatic restart.
* simplify "drain strategy" setting into an on/off toggle. care was
taken that existing configs work the same after an upgrade. the
respective drain strategy is translated into the new setting when
reading the config. once the config is written, the new setting is
persisted and the old is not part of the config any more.
* show more configuration hints, depending on actual configuration
* replace inputs by InputElement components where possible
* fix compiler warning in SerialPortManager.cpp: function must not
return void
* clean up and simplify implementation of usesHwPort2()
* make const
* overrides are final
* default implementation returns false
* implement in header, as the implementation is very simple
* rename PortManager to SerialPortManager. as "PortManager" is too
generic, the static instance of the serial port manager is renamed to
"SerialPortManager". the class is therefore renamed to
SerialPortManagerClass, which is in line with other (static) classes
withing OpenDTU(-OnBattery).
* implement separate data ages for MPPT charge controllers
* make sure MPPT data and live data time out
* do not use invalid data of MPPT controlers for calculations
* add :key binding to v-for iterating over MPPT instances
this change adds support for a second Victron MPPT charge controller
using a second serial connection.
* Add device configuration for a second victron mppt
* Update VedirectView for second victron mppt
* Update MqttHandleVedirect for second victron mppt
* Update MqttHandleVedirectHass for second victron mppt
* Handle nonexisting victron controllers with optionals
* Add bool-function to Battery and inherited classes, if uart port 2 is
being used
* Introduced a serial port manager. In order to prevent the battery and
the Victron MPPT to use the same hw serial ports, this class keeps
track of the used ports and their owners.
now that users can tell the DPL that their inverter is not powered by a
battery but powered by solar panels, we shall not restart inverters to
reset the daily yield value, if they are solar powered. these inverters
will reboot every night by themselves.
* fix logic in HomeAssistent handler
* also publish voltage thresholds (not just SoC thresholds)
* do not publish irrelevant thresholds to MQTT. if the inverter is
solar-powered, no thresholds are effectively in use by the DPL and it
therefore makes no sense to publish them to the broker. similarly, if
no battery interface is enabled or the SoC values are set to be
ignored, the SoC thresholds are effectively not in use and will not be
published to the broker.
* make HA auto-discovery expire. this makes auto-dicovered items
disappear from Home Assistent if their value is no longer updated.
changes to settings which cause other thresholds to be relevant will
then be reflected in Home Assistent even if some thresholds are no
longer maintaned in MQTT.
* force HA update when related settings change enabling VE.Direct shall
trigger an update since solar passthrough thresholds become relevant.
similarly, enabling the battery interface makes SoC thresholds become
relevant. there are more settings in the power limiter that also
influence the auto-discoverable items.
* break very long lines
the allocated memory to create the JSON with onBattery-specific totals
for the live view was too little to contain all values, which are sent
regularly.
avoid shutting down the inverter at all if the calculated power limit
falls below the lower power limit or if the power meter value is
outdated. do this only if the inverter is setup to be solar powered.
by default and until this change, we assumed that the inverter
controlled by the DPL is powered by a battery. not all users have a
battery in their system. they still use the DPL to achieve net-zero
export. those users can now tell the DPL that their inverter is powered
by solar modules rather than a battery and the DPL will behave
accordingly.
do not scale limit if inverter is not producing, as DC channel power is
expected to be close to zero anyways.
do not scale limit if current inverter limit is small, such that
channels might produce very little power exactly because the limit is so
low.
move the calculation out of setNewPowerLimit and into a new function, so
that we can make use of return statements there.
the update frequency of Victron MPPT charger data, the battery Soc, the
huawei charger power, and the power meter differ from one another, and
differ in particular from the inverter update frequency.
the OnBattery-specific data is now handled in a new method, outside the
upstream code, which merely call the new function(s). the new function
will update the websocket independently from inverter updates. also, it
adds the respective data if it actually changed since it was last
updated through the websocket.
for the webapp to be able to recover in case of errors, all values are
also written to the websocket with a fixed interval of 10 seconds.
we previously only called commitPowerLimit() if the desired limit
changed such that the change was bigger than the hysteresis. we found
that if the limit update was not received and the desired limit would
not change much, the limit of the inverter was wrong for a long time.
to mitigate this, we introduced re-sending the limit update every 60
seconds, regardless of what the limit reported by the inverter was at
that time.
if the power-up command was not received, we also would repeat it only
once every 60 seconds.
this leads to a new kind of staleness and the actual inverter state was
still not matching the desired state.
this new approach effectively adds an additional control loop at the
start of the DPL loop(). that new function compares the requested
inverter state to the actual reported state. it sends updates (limit
update or power on state) until the desired inverter state is reached,
or until a (hard-coded) timeout occurs.
this approach also allows us to send power-up, power-down, and limit
update commands independent from one another and in a particular order.
this should make sure that the inverter is in the desired state even if
conditions change slowly and commands were not received as expected.
* make efficient use of available display area
fix calculation of the text baselines, using getAscent() in favor of
getMaxCharHeight(), which includes ascent and descent. this moves the
first text up and allows to insert margin between the lines until the
display area is fully utilized.
on large displays, if the small diagram is selected, keep the first line
rather low to avoid collision with the diagram y-axis label. in this mode,
there is still more space between the text lines as before, allowing for
improved readability.
* Feature: show power grid usage on display
if the power meter is enabled, the display will use two of three out
of every three-second time slot to show the grid consumption.
closes#620.
the DPL is interested in the battery's voltage to make decisions about
draining the battery or letting it charge (if the user opts to use
voltage thresholds rather than SoC thresholds). using the DC input
voltage reported by the inverter under control has disadvantages:
* the data might be quite old due to the communication protocol
implementation. more inverters being polled means even more lag. the
connection being wireless makes this even worse, due to the need
to retry the occasional lost packet, etc.
* the data is not very accurate, since the DC input of the inverter is
actually some cabling and a couple of junctions away from the actual
battery. this voltage drop can mostly only be estimated and is worse
with higher load. the load correction factor is there to mitigate
this, but it has its own problems and is cumbersome to calibrate.
instead, this change aims to use more accurate battery voltage readings,
if possible. the DPL now prefers the voltage as reported by the BMS,
since it is for sure the closest to the battery of all measuring points
and measures its voltage accurately regardless of the load (the voltage
reading will still drop with higher loads, but this will be only due to
the battery's internal resistance, not that of cabling or junctions). if
no BMS voltage reading is available, the DPL will instead use the charge
controller's voltage reading, as it is available with much higher
frequency and is assumed to be more accurate as it offers a resolution
of 10mV. only if none of these two sources can be used, the inverter DC
input voltage is assumed as the battery voltage.
closes#655.
the Victron SmartShunt communicates the SoC value in permille. this
should be displayed in the web UI accordingly. this is a good excuse to
fully move ownership of the SoC value to the BatteryStats base class and
add a precision indicator variable. this is required to be set each time
a derived class (a battery provider) wants to update the SoC value. the
precision is then used when populating the JSON data for the web UI
(live view).
related to #573.
in the respective context, the DPL only needs to be sure that the SoC
value is not outdated. it should not even care about other values
reported by the battery interface. hence, the isValid() method shall be
concerned with the SoC value timestamp only. the method is renamed for
clarity.
this extends the MqttBattery implementation by an additional topic which
allows to subscribe to receive battery voltage readings through the MQTT
broker. similar to the battery SoC topic, this allows to import a
critical battery data point for the DPL, in case the user chooses to use
voltage thresholds rather than SoC thresholds to control the DPL. if an
otherwise incompatible BMS is available which publishes the battery pack
voltage through MQTT, this can now be used to feed accurate voltage
readings to the DPL.
the BatteryStats base class shall be able to tell the total battery pack
voltage. for that reason, and to avoid code duplication, the voltage is
now handled in the base class and treated as a datum that is common to
all battery providers.
unfortunately, the battery SoC values reported by battery BMSs are
unreliable, at least for some users, or at least without regular
(manual) full charge cycles to calibrate the BMS. it offers great
advantages to connect OpenDTU-OnBattery to a BMS (MQTT publishing of
values, Home Assistent integration, etc.), but previously the users
were then forced to configure the DPL by SoC values.
this change allows to configure the DPL such that SoC values are
ignored. instead, the voltage limits are used to make DPL decisions, as
if no SoC was available in the first place.
the SoC related setting are hidden from the DPL settings view if SoC
values are configured to be ignored.
closes#654.
this implementation avoids the display content jumping the full
screensaver offset from right to left when the modulo operator
wraps. this change makes the display content walk from right to
left as it did walk from left to right.
in case the total production is larger than 1 MWh, i.e., 1000 kWh, the
text on the respective line becomes too large such that it reaches out
of the display when the screensaver is enabled.
this happens on the small and large displays.
this change switches the number format to a float without decimal places
if the total production is larger or equal to 1000 kWh. this saves a dot
and a digit, making the text short enough to fit the display even when
the screensaver moved the display contents as far to the right as it
does.
fix calculation of the text baselines, using getAscent() in favor of
getMaxCharHeight(), which includes ascent and descent. this moves the
first text up and allows to insert margin between the lines until the
display area is fully utilized.
on large displays, if the small diagram is selected, keep the first line
rather low to avoid collision with the diagram y-axis label. in this mode,
there is still more space between the text lines as before, allowing for
improved readability.
* pylontech HA integration: remove unused method/variable
* make MqttHandlePylontechHassClass::publishConfig() private.
there are no outside users of that method.
* rename to MqttHandleBatteryHass
* battery HA integration: merge methods and bring back forceUpdate().
even though the forceUpdate() method was not in use before, it makes
sense to implement it and use it when the battery config changes.
rather than controlling a separate flag, it now changes the _doPublish
flag of the class, which also triggers publishing the device config to
Home Assistant when an MQTT connection problem was detected. since
both situations are now handled similarly, we can merge the loop() and
publishConfig() methods.
* battery: provider specific sensors for HA
* move Battery MQTT loop to BatteryStats
the BatteryStats class should handle the MQTT publishing, including the
interval. for the calculation of a reasonable Home Assistent expiration
value this class now also knows the maximum publish interval.
* JK BMS: fix publishing values for Home Assistent
Home Assistent values expire, because we set them to expire after three
MQTT publish durations. for that reason, we need to re-publish all
values after our self-inflicted full publish interval.
* define JK BMS sensors for Home Assistent
closes#482.
previously, the Pytlontech Home Assistent class implementation had an
init() method, that was never called, as it did nothing. the class
relied on its loop() method being called from the main loop(). after
switching to the TaskScheduler approach, the Pylontech Home Assistent
class init() method was adjusted to register a task that calls the
loop() method periodically. however, the init() method was still not
called.
To reduce the heap usage it is necessary to send the inverters one by one instead of a huge response. A simple call to `/api/livedata/status` returns just some very general information. If detailed inverter information are required the inverter serial number has to appended `?inv=<serial number>`.
The websocket also returns only one inverter at a time. It as to be assembled at client side.
currently the whole SmartShunt data structure is copied to the
BatteryStats instance in every loop, even though the data cannot
possibly have changed. this is quite an expensive task to do in every
loop. this change tracks the last update timestamp and only does the
copy operation if an actual updated data structure was received from
the smart shunt.
this change adds the values of ESP.gteMaxAllocHeap() and
ESP.getMinFreeHead() to the prometheus metrics and the system
information object. the web UI uses these values to diplay the size of
the largest free contiguous block, calculate a rough estimate for the
level of fragmentation, and the maximum usage of heap memory since boot
in absolute and relative amounts.
this change adds the values of ESP.gteMaxAllocHeap() and
ESP.getMinFreeHead() to the prometheus metrics and the system
information object. the web UI uses these values to diplay the size of
the largest free contiguous block, calculate a rough estimate for the
level of fragmentation, and the maximum usage of heap memory since boot
in absolute and relative amounts.
OpenDTU console gets spammed with "WifiGeneric::hostByName() error when first trying to resolve the hostname via DNS. So reverse order: first try mDNS, if that fails try DNS. Also ensure that https bool is passed correctly to HTTPClient::begin(). Lastly, concatenate strings for building Digest authorization using "+" and not via snprintf.
this change utilizes some of the features from library "frozen", which
was included upstream for the grid profile parser. to improve code
maintainability, a couple of std::maps mapping strings to values or the
other way around were introduced in OpenDTU-OnBattery-specific code at
the expense of some flash and computing overhead.
library "frozen" offers constexpr versions of map and string, which
saves initialization code and offers slightly faster lookups. this
brings the binary size down by ~25kB and should provide a small
performance improvement at runtime.
Added ability to deal with local host names (mDNS), remove use of FirebasedJson to save ~20kB build size, some changes to PowerLimiter to avoid setting new inverter power limits when not needed (=current limit as reported by inverter is within hysteresis)
this battery provider implementation subscribes to a user-configurable
MQTT topic to retrieve the battery SoC value. the value is not
re-published under a different topic. there is no card created in the
web app's live view, since the SoC is already part of the totals at the
top of the live view. that is the only info this battery provider
implements.
closes#293.
relates to #581.
MQTT message callbacks are executed in the MQTT thread context. when
processing topics that control the DPL, we must avoid executing methods
that are not thread-safe. this change binds the methods to be called to
the respective parameters and executes them in the TaskScheduler
context, such that they no longer need to be thread-safe.
* bind the callback to a topic (enum value) such that there is no need
to tokenize the full topic (string) to find out what value is being
processed. tokenizing is expensive.
* get rid of using the config in the callback, which improves
thread-safety since the MQTT callback is running in the MQTT thread.
* prefer C++ method stof to convert MQTT value to a float, which saves
us from using new and delete for a buffer in particular.
* prefer switch statements over if-else-trees.
* split long lines.
* get rid of topic #defines.
* fix indention.
MQTT message callbacks are executed in the MQTT thread context. when
processing topics that control the huawei AC charger, we must avoid
executing methods that are not thread-safe. this change bound the
methods to be called to the respective parameters and executes them
in the TaskScheduler context, such that they no longer need to be
thread-safe.
there are more interesting values available to display in the live view.
however, adding them made the list of values very long. this can be
mitigated by using a new column/card, which uses the available screen
space nicely on bigger screens.
this commit re-introduces the changes from #418, which were effectively
reverted with d49481097 (merge commit introducing TaskScheduler).
these adjustments are important to guarantee unmangled log messages and
more importantly, to guarantee that all messages from a particular
component are printed to the web console, which most people use to copy
messages from when reporting issues.
* use dynamic memory to allow handling of arbitrary message lenghts.
* keep a message buffer for every task so no task ever mangles the
message of another task.
* every complete line is written to the serial console and moved to
a line buffer for sending them through the websocket.
* the websocket is always fed complete lines.
* make sure to feed only as many lines as possible to the websocket
handler, so that no lines are dropped.
* lock all MessageOutput state against concurrent access.
* respect HardwareSerial buffer size: the MessageOutput class buffers
whole lines of output printed by any task in order to avoid mangling
of text. that means we hand over full lines to the HardwareSerial
instance, which might be too much in one call to write(buffer, size).
we now check the return value of write(buffer, size) and call the
function again with the part of the message that could not yet be
written by HardwareSerial.
the updateSettings method is called from the web server's context and
therefore accesses _upProvider in a different context than the
TaskScheduler. the lock_guard needs to protect _upProvider.
* Optimize Sun data calculation
* Remove not required enum
* Split config struct into different sub structs
* Feature: Allow configuration of LWT QoS
* Made resetreason methods static
* Feature: Implement offset cache for "YieldDay"
Thanks to @broth-itk for the idea!
Fix: #1258#1397
* Add Esp32-Stick-PoE-A
* remove broken LilyGO_T_ETH_POE config, use device profile instead
* Feature: High resolution Icon and PWA (Progressive Web App) functionality
Fix: #1289
* webapp: Update dependencies
* Initialize TaskScheduler
* Migrate SunPosition to TaskScheduler
* Migrate Datastore to TaskScheduler
* Migrate MqttHandleInverterTotal to TaskSchedule
* Migrate MqttHandleHass to TaskScheduler
* Migrate MqttHandleDtu to TaskScheduler
* Migrate MqttHandleInverter to TaskScheduler
* Migrate LedSingle to TaskScheduler
* Migrate NetworkSettings to TaskScheduler
* Migrate InverterSettings to TaskScheduler
* Migrate MessageOutput to TaskScheduler
* Migrate Display_Graphic to TaskScheduler
* Migrate WebApi to TaskScheduler
* Split InverterSettings into multiple tasks
* Calculate SunPosition only every 5 seconds
* Split LedSingle into multiple tasks
* Upgrade espMqttClient from 1.4.5 to 1.5.0
* Doc: Correct amount of MPP-Tracker
* Added HMT-1600-4T and HMT-1800-4T to DevInfoParser
Fix#1524
* Adjusted inverter names for HMS-1600/1800/2000-4T
* Add channel count to description of detected inverter type (DevInfoParser)
* Adjust device web api endpoint for dynamic led count
* Feature: Added ability to change the brightness of the LEDs
Based on the idea of @moritzlerch with several modifications like pwmTable and structure
* webapp: Update dependencies
* Update olikraus/U8g2 from 2.35.7 to 2.35.8
* Remove not required onWebsocketEvent
* Remove code nesting
* Introduce several const statements
* Remove not required AsyncEventSource
* Doc: Added byte specification to each command
* Feature: Added basic Grid Profile parser which shows the used profile and version
Other values are still outstanding.
* Optimize AlarmLogParser to save memory
* Add libfrozen to project to create constexpr maps
* Feature: First version of GridProfile Parser which shows all values contained in the profile.
* webapp: Update dependencies
* Apply better variable names
* Remove not required casts
* Add additional compiler flags to prevent errors
* Add const statement to several variables
* Replace NULL by nullptr
* Update bblanchon/ArduinoJson from 6.21.3 to 6.21.4
* Add const keyword to method parameters
* Add const keyword to methods
* Use references instead of pointers whenver possible
* Adjust member variable names in MqttSettings
* Adjust member variable names in NetworkSettings
* webapp: Update timezone database to latest version
* webapp: Beautify and unify form footers
* Feature: Allow setting of an inverter limit of 0% and 0W
Thanks to @madmartin in #1270
* Feature: Allow links in device profiles
These links will be shown on the hardware settings page.
* Doc: Added hint regarding HMS-xxxx-xT-NA inverters
* Feature: Added DeviceProfile for CASmo-DTU
Based on #1565
* Upgrade actions/upload-artifact from v3 to v4
* Upgrade actions/download-artifact from v3 to v4
* webapp: add app.js.gz
* Gridprofileparser: Added latest known values
Thanks to @stefan123t and @noone2k
* webapp: Fix lint errors
* Feature: Add DTU to Home Assistant Auto Discovery
This is based on PR 1365 from @CFenner with several fixes and optimizations
* Fix: Remove debug output as it floods the console
* Fix: Gridprofileparser: Add additional error handling if profile is unknown
* webapp: add app.js.gz
* Fix: Offset cache for "YieldDay" did not work correctly
* webapp: update dependencies
* webapp: add app.js.gz
* Fix: yarn.lock was outdated
* Fix: yarn build error
* Fix: Reset Yield day correction in combination with Zero Yield Day on Midnight lead to wrong values.
* Fix: Allow negative values in GridProfileParser
* Correct variable name
* Fix#1579: Static IP in Ethernet mode did not work correctly
* Feature: Added diagram to display
This is based on the idea of @Henrik-Ingenieur and was discussed in #1504
* webapp: update dependencies
* webapp: add app.js.gz
---------
Co-authored-by: Thomas Basler <thomas@familie-basler.net>
Co-authored-by: Pierre Kancir <pierre.kancir.emn@gmail.com>
* add more values to web app live view. this should add all interesting
values for the web app live view. those include important values and
values that change frequently.
* add more interesting JK BMS dummy messages: one has 0% SoC and an
alarm (discharge undervoltage) set. the other has the undertemperature
alarm set.
* add alarms and warnings to live view
* publish alarm and status bits through MQTT individually
* publish cell voltages to MQTT broker
* remove trailing spaces in BatteryStats class
* VE.Direct: return non-nullptr as a fallback
the changed return statement was supposed to return a shared_ptr to a
new and valid MPPT data struct as a fallback. however, it did return a
new shared_ptr that was initialized to nullptr.
* VE.Direct: make liveview total use total MPPT values
this change makes the call to VictronMppt.getData() obsolete, which in
turn will therefore not cause an error message on the console if
VE.Direct (MPPT) is not enabled. this change also takes care that once
multiple VE.Direct MPPT charge controllers are supported, the sums of
the respective total values are used in the web app totals.
* introduce VictronMpptClass
this solves a design issue where the loop() method of a static instance
of VeDirectMpptController, which is part of library code, is called as
part of the main loop() implementation. that is a problem because the
call to this loop() must be handled differently from all other calls:
the lib does not know whether or not the feature is enabled at all.
also, the instance would not be initialized when enabling the feature
during normal operation. that would even lead to a nullptr exception
since the pointer to the serial implementation is still uninitialized.
this new intermediate class is implemented with the support for multiple
Victron charge controllers in mind. adding support for more charge
controllers should be more viable than ever.
fixes#481.
related to #397#129.
* VE.Direct: move get.*AsString methods to respective structs
those structs, which hold the data to be translated into strings, know
best how to translate them. this change also simplifies access to those
translation, as no parameter must be handed to the respective methods:
they now act upon the data of the instance they are called for. adds
constness to those methods.
* VE.Direct: simplify and clean up get.*AsString methods
use a map, which is much easier to maintain and which reads much easier.
move the strings to flash memory to save RAM.
* DPL: use VictronMpptClass::getPowerOutputWatts method
remove redundant calculation of output power from DPL. consider
separation of concern: VictronMpptClass will provide the total solar
output power. the DPL shall not concern itself about how that value is
calculated and it certainly should be unaware about how many MPPT charge
controllers there actually are.
* VE.Direct: avoid shadowing struct member "P"
P was part of the base struct for both MPPT and SmartShunt controller.
however, P was also part of the SmartShunt controller data struct,
shadowing the member in the base struct.
since P has slightly different meaning in MPPT versus SmartShunt, and
since P is calculated for MPPT controllers but read from SmartShunts, P
now lives in both derived structs, but not in the base struct.
* VE.Direct: isDataValid(): avoid copying data structs
pass a const reference to the base class implementation of isDataValid()
rather than a copy of the whole struct.
* VE.Direct: unify logging of text events
* VE.Direct: stop processing text event if handled by base
in case the base class processed a text event, do not try to match it
against values that are only valid in the derived class -- none will
match.
* VE.Direct MPPT: manage data in a shared_ptr
instead of handing out a reference to a struct which is part of a class
instance that may disappear, e.g., on a config change, we now manage the
lifetime of said data structure using a shared_ptr and hand out copies
of that shared_ptr. this makes sure that users have a valid copy of the
data as long as they hold the shared_ptr.
* VE.Direct MPPT: implement getDataAgeMillis()
this works even if millis() wraps around.
* VE.Direct: process frame end event only for valid frames
save a parameters, save a level of indention, save a function call for
invalid frames.
