This implements RFC5424 version of the protocol.
Don't use https://github.com/arcao/Syslog since the protocol itself
is trivial and most of the libraries functionality is not needed here.
The library also doesn't support setting the PROCID field, which is set
to a random id to indicate a reboot here.
Add UI for syslog configuration to network admin view.
I noticed that these are missing while looking at dissassembly of the
Pytes implementation of the protocol. I also found Pylontech sample
CAN messages] which match the Pytes implementation [1]:
```
CAN ID – followed by 2 to 8 bytes of data:
0x351 – 14 02 74 0E 74 0E CC 01 – Battery voltage + current limits
^^^^^ discharge cutoff voltage 46.0V
0x355 – 1A 00 64 00 – State of Health (SOH) / State of Charge (SOC)
0x356 – 4e 13 02 03 04 05 – Voltage / Current / Temp
0x359 – 00 00 00 00 0A 50 4E – Protection & Alarm flags
^^^^^ always 0x50 0x59 in Pytes implementation
^^ module count (matches the blog article image)
0x35C – C0 00 – Battery charge request flags
^^ two possible additional flags (bit 3 and bit 4)
0x35E – 50 59 4C 4F 4E 20 20 20 – Manufacturer name (“PYLON “)
^^^^^^^^^^^^^^ Note: Pytes sends a 5-byte message "PYTES" instead
padding with spaces
```
The extra charge request flag is "bit4: SOC low" (Seems to be SoC < 10%
threshold for Pytes), I haven't bothered adding that as it provides
little value.
[1] https://www.setfirelabs.com/green-energy/pylontech-can-reading-can-replication
* implements UI to configure battery discharge limit
* adds support for discharge limit to MQTT battery provider
* add option to hide `issues` section from battery live view (for MQTT battery)
If the string contains control characters for some reason, the browser
will reject the json with the error `bad control character in string
literal`.
This adds a setManufacturer function that validates the string is ASCII
and will cut off the string at the first non-ascii character.
Pylontech: `PYLON` (50 59 4C 4F 4E 20 20 20)
Pytes: `PYTES` (50 59 54 45 53)
Deye: `DY001` (44 59 30 30 31 03 E8 03)
See https://github.com/helgeerbe/OpenDTU-OnBattery/discussions/1226#discussioncomment-10566898
Commit accc70dea0 added the battery SoC to
the live view header. But due to getSoC() returning an int,
the precision was limited.
This changes getSoC() to return float so when a source with higher
precision is available, the respective precision is shown.
value 100 is not accepted by the webapp as inputs for full
solar-passthrough start and stop volages. 66V is the documented
value to be used if one wants to disable full solar-passthrough
(while keeping (non-full) solar-passthrough).
this allows us to add a valid Authorization header to each but the first
GET request, saving us from performing two GET requests every time we
want to perform the GET request. we still need a new client nonce and we
need to increase the nonce counter, so we also need to calculate a whole
new response, as we cannot just reuse the previous Authorization header
(that would be a replay attack).
the MD5 scheme should still be widely deployed, even though it is
deprecated. it is also still the default if not specific algorithm
is requested by the server.
we previously performed a whole new GET request when doing digest
authentication. it seemed beneficial to reuse the TCP connection to
perform the second GET request, which includes the authentication
tokens. however, if the server sends "Connection: close" we must not
requse the TCP connection for another HTTP request.
this broke authentication against Shelly devices (at least those with
original firmware).
now we explicitly set "Connection: keep-alive" in our request, and reuse
the TCP connection only if te server replies with "Connection:
keep-alive" as well.
* update mqtt subscriptions when topic was changed
* DPL/Huawei: manage MQTT subscriptions in map
---------
Co-authored-by: Bernhard Kirchen <schlimmchen@posteo.net>
* backport SPIPortManager from @skippermeister
* adapt to support ESP32 and ESP32-S3 and ESP32-C3
* use logic to work with SPI numbering as in the official
documentation: start with SPI0 and go up to SPI3
* increase Huawei CAN controller stack size to 2000
* increase startup delay for USB_CDC enabled builds to be able to
catch bootlogs over USB
* fix: DPL: start discharging at night logic error
the switch "always start discharging battery at night" would cause to
stop discharging the battery when there was solar power and the battery
was discharged below the start threshold.
this change introduces a nighttime discharging boolean variable, which
is enabled the instant we decide to start a battery discharge cycle due
to nighttime havin arrived. we reset this variable as soon as it is
daytime (solar power available). in that case, we allow discharging the
battery if the start threshold was reached. this can actually be the
case if the battery is charged with cheap electricity during the night.
removed comments as they merely spell out what the if statement already
expresses quite nicely.
* use SunPosition.isDayPeriod() to check for daytime
---------
Co-authored-by: Andreas Böhm <andreas@boehm.cx>
