when upgrading to cpplint 2.0.0, C-style casts are flagged. since many
of them are in libraries, we will use version 1.6.1 until we figure out
whether we shall ignore C-style casts or if we will replace them.
the workflows running unconditionally for each push and each PR are run
twice when pushing to a branch that is to be merged by a PR and if that
branch is a branch local to the repo (rather than in a fork).
this allows us to fix the version of yarn, the Node.js package manager,
to a particular version. using corepack is the recommended way to use
yarn these days.
the "Yarn Linting" action causes a warning to appear about a deprecated
Node version. switch to actions/setup-node@v4, which is already in use
by the action building the web app for the firmware, to avoid this
warning.
it seems this action has not been run for nealry a year. it has only
been run twice at all. it is not maintained, as it uses older Node.js
in particular. also, it seems to be redundant to build.yml, which
already builds firmware for every commit.
disabled as uploading the changed gist failed repeatedly. maybe the
token in secrets.GIST_SECRET has expired? need help from repo owner
@helgeerbe to fix this.
this updates the partition scheme for devices with 4 MB of flash memory
to have only a single app partition, doubling its size, but sacrificing
their OTA update capability. the replacement environment for
"generic_esop32" is called "generic_esp32_4mb_no_ota".
the new default partition scheme is targeted for devices with at least 8
MB of flash memory. the previous two app partitions are merged into one,
and one additional app partition of the same new size is added to the
back of the table. the change preserves the littlefs partition (position
and size), allowing for upgrades without loosing the configuration.
another new environment is added, called "generic_esp32_8mb", which uses
the new default partition layout.
environment "generic" is removed. it was merely a variant of
"generic_esp32" with some pins pre-defined. we want users to install a
pin_mapping.json and use the generic firmwares.
environments for boards that have no version with at least 8 MB of flash
memory are setup using the 4 MB partition layout (no OTA updates).
all users must flash the factory.bin for their respective environment
using esptool (or compatible software) using the USB port of their
board. in other words: updating to the new partition scheme using an OTA
update is NOT possible.
hint: the ESP32-S3 builds have a smaller code footprint. this means
ESP32-S3 boards can be updated using OTA without updating the partition
layout on the devices for some unspecified time longer, i.e., until
their firmware binary actually becomes too large for the old sketch
partition size.
the non-factory binary for generic_esp32_4mb_no_ota is NOT collected as
an artifact. going forward, users must update using the factory binary
and using the USB connection to their boards.
This change makes the build runner switch to a meaningful branch name, which will then appear as the "Firmware Branch" in the System Info of the web application. This helps users testing pull-request builds identify that they are actually using the changes from the respective pull request.
* Optimize Sun data calculation
* Remove not required enum
* Split config struct into different sub structs
* Feature: Allow configuration of LWT QoS
* Made resetreason methods static
* Feature: Implement offset cache for "YieldDay"
Thanks to @broth-itk for the idea!
Fix: #1258#1397
* Add Esp32-Stick-PoE-A
* remove broken LilyGO_T_ETH_POE config, use device profile instead
* Feature: High resolution Icon and PWA (Progressive Web App) functionality
Fix: #1289
* webapp: Update dependencies
* Initialize TaskScheduler
* Migrate SunPosition to TaskScheduler
* Migrate Datastore to TaskScheduler
* Migrate MqttHandleInverterTotal to TaskSchedule
* Migrate MqttHandleHass to TaskScheduler
* Migrate MqttHandleDtu to TaskScheduler
* Migrate MqttHandleInverter to TaskScheduler
* Migrate LedSingle to TaskScheduler
* Migrate NetworkSettings to TaskScheduler
* Migrate InverterSettings to TaskScheduler
* Migrate MessageOutput to TaskScheduler
* Migrate Display_Graphic to TaskScheduler
* Migrate WebApi to TaskScheduler
* Split InverterSettings into multiple tasks
* Calculate SunPosition only every 5 seconds
* Split LedSingle into multiple tasks
* Upgrade espMqttClient from 1.4.5 to 1.5.0
* Doc: Correct amount of MPP-Tracker
* Added HMT-1600-4T and HMT-1800-4T to DevInfoParser
Fix#1524
* Adjusted inverter names for HMS-1600/1800/2000-4T
* Add channel count to description of detected inverter type (DevInfoParser)
* Adjust device web api endpoint for dynamic led count
* Feature: Added ability to change the brightness of the LEDs
Based on the idea of @moritzlerch with several modifications like pwmTable and structure
* webapp: Update dependencies
* Update olikraus/U8g2 from 2.35.7 to 2.35.8
* Remove not required onWebsocketEvent
* Remove code nesting
* Introduce several const statements
* Remove not required AsyncEventSource
* Doc: Added byte specification to each command
* Feature: Added basic Grid Profile parser which shows the used profile and version
Other values are still outstanding.
* Optimize AlarmLogParser to save memory
* Add libfrozen to project to create constexpr maps
* Feature: First version of GridProfile Parser which shows all values contained in the profile.
* webapp: Update dependencies
* Apply better variable names
* Remove not required casts
* Add additional compiler flags to prevent errors
* Add const statement to several variables
* Replace NULL by nullptr
* Update bblanchon/ArduinoJson from 6.21.3 to 6.21.4
* Add const keyword to method parameters
* Add const keyword to methods
* Use references instead of pointers whenver possible
* Adjust member variable names in MqttSettings
* Adjust member variable names in NetworkSettings
* webapp: Update timezone database to latest version
* webapp: Beautify and unify form footers
* Feature: Allow setting of an inverter limit of 0% and 0W
Thanks to @madmartin in #1270
* Feature: Allow links in device profiles
These links will be shown on the hardware settings page.
* Doc: Added hint regarding HMS-xxxx-xT-NA inverters
* Feature: Added DeviceProfile for CASmo-DTU
Based on #1565
* Upgrade actions/upload-artifact from v3 to v4
* Upgrade actions/download-artifact from v3 to v4
* webapp: add app.js.gz
* Gridprofileparser: Added latest known values
Thanks to @stefan123t and @noone2k
* webapp: Fix lint errors
* Feature: Add DTU to Home Assistant Auto Discovery
This is based on PR 1365 from @CFenner with several fixes and optimizations
* Fix: Remove debug output as it floods the console
* Fix: Gridprofileparser: Add additional error handling if profile is unknown
* webapp: add app.js.gz
* Fix: Offset cache for "YieldDay" did not work correctly
* webapp: update dependencies
* webapp: add app.js.gz
* Fix: yarn.lock was outdated
* Fix: yarn build error
* Fix: Reset Yield day correction in combination with Zero Yield Day on Midnight lead to wrong values.
* Fix: Allow negative values in GridProfileParser
* Correct variable name
* Fix#1579: Static IP in Ethernet mode did not work correctly
* Feature: Added diagram to display
This is based on the idea of @Henrik-Ingenieur and was discussed in #1504
* webapp: update dependencies
* webapp: add app.js.gz
---------
Co-authored-by: Thomas Basler <thomas@familie-basler.net>
Co-authored-by: Pierre Kancir <pierre.kancir.emn@gmail.com>
* Move Mppt logic to subclass
* Added Definitions for Shunts and restructering
* First integration of SmartShunt data into Web Interface
* Code cleanup
* VE.Direct: whitespace cleanup
* VE.Direct: manage HardwareSerial in unique_ptr
* VE.Direct: _efficiency is only needed by MPPT
* VE.Direct: keep as many members private as possible
* VE.Direct: use int8_t for pins (as before)
* VictronSmartShunt: _verboseLogging is not used
* VE.Direct: OR (off reason) is MPPT specific
it also applies to Phoenix inverters and Smart BuckBoost, but since
there is no support for those, the code is moved to the MPPT controller.
* Added Shunt alarms to liveview
Changed from double to int for several readings
* Update build.yml to allow manual builds
---------
Co-authored-by: Philipp Sandhaus <philipp.sandhaus@cewe.de>
Co-authored-by: Bernhard Kirchen <schlimmchen@posteo.net>
