reset docs/MQTT_Topics.md to upstream version (#343)
MQTT topics that are specific to OpenDTU-OnBattery shall only be documented once. They are documented in the project's wiki already.
This commit is contained in:
Bernhard Kirchen
GitHub
parent
43e836ac41
commit
9bc334e368
@ -1,7 +1,6 @@
|
||||
# MQTT Topics
|
||||
|
||||
The base topic, as configured in the web GUI is prepended to all following topics.
|
||||
Serial will be replaced with the serial number of the respective device.
|
||||
The base topic, as configured in the web GUI is prepended to all follwing topics.
|
||||
|
||||
## General topics
|
||||
|
||||
@ -87,114 +86,3 @@ cmd topics are used to set values. Status topics are updated from values set in
|
||||
| [serial]/cmd/limit_nonpersistent_absolute | W | Set the inverter limit as a absolute value. The value will reset to the last persistent value at night without power. The updated value will set immediatly within the inverter but show up in the web GUI and limit_relative topic after around 4 minutes. If you are using a already known inverter (known Hardware ID), the updated value will show up within a few seconds. The value must be published non-retained, otherwise it will be ignored! | Watt (W) |
|
||||
| [serial]/cmd/power | W | Turn the inverter on (1) or off (0) | 0 or 1 |
|
||||
| [serial]/cmd/restart | W | Restarts the inverters (also resets YieldDay) | 1 |
|
||||
|
||||
### Victron MPPT topics
|
||||
|
||||
#### General
|
||||
|
||||
| Topic | R / W | Description | Value / Unit |
|
||||
| --------------------------------------- | ----- | ---------------------------------------------------- | -------------------------- |
|
||||
| victron/[serial]/PID | R | Product description | text |
|
||||
| victron/[serial]/SER | R | Serial number | text |
|
||||
| victron/[serial]/FW | R | Firmware number | int |
|
||||
| victron/[serial]/LOAD | R | Load output state | ON / OFF |
|
||||
| victron/[serial]/CS | R | State of operation | text e. g. "Bulk" |
|
||||
| victron/[serial]/ERR | R | Error code | text e. g. "No error" |
|
||||
| victron/[serial]/OR | R | Off reasen | text e. g. "Not off" |
|
||||
| victron/[serial]/MPPT | R | Tracker operation mode | text e. g. "MPP Tracker active" |
|
||||
| victron/[serial]/HSDS | R | Day sequence number (0...364) | int in days |
|
||||
|
||||
#### Battery output
|
||||
|
||||
| Topic | R / W | Description | Value / Unit |
|
||||
| --------------------------------------- | ----- | ---------------------------------------------------- | -------------------------- |
|
||||
| victron/[serial]/V | R | Voltage | Volt (V) |
|
||||
| victron/[serial]/I | R | Current | Ampere (A) |
|
||||
|
||||
#### Solar input
|
||||
|
||||
| Topic | R / W | Description | Value / Unit |
|
||||
| --------------------------------------- | ----- | ---------------------------------------------------- | -------------------------- |
|
||||
| victron/[serial]/VPV | R | Voltage | Volt (V) |
|
||||
| victron/[serial]/PPV | R | Power | Watt (W) |
|
||||
| victron/[serial]/H19 | R | Yield total (user resettable counter) | Kilo watt hours (kWh) |
|
||||
| victron/[serial]/H20 | R | Yield today | Kilo watt hours (kWh) |
|
||||
| victron/[serial]/H21 | R | Maximum power today | Watt (W) |
|
||||
| victron/[serial]/H22 | R | Yield yesterday | Kilo watt hours (kWh) |
|
||||
| victron/[serial]/H23 | R | Maximum power yesterday | Watt (W) |
|
||||
|
||||
### Pylontech battery topics
|
||||
|
||||
| Topic | R / W | Description | Value / Unit |
|
||||
| --------------------------------------- | ----- | ---------------------------------------------------- | -------------------------- |
|
||||
| battery/settings/chargeVoltage | R | Voltage | Volt (V) |
|
||||
| battery/settings/chargeCurrentLimitation | R | BMS requested max. charge current | Ampere (A) |
|
||||
| battery/settings/dischargeCurrentLimitation | R | BMS requested max. discharge current | Ampere (A) |
|
||||
| battery/stateOfCharge | R | State of Health | % |
|
||||
| battery/stateOfHealth | R | State of Charge | % |
|
||||
| battery/dataAge | R | How old the data is | Seconds |
|
||||
| battery/voltage | R | Actual voltage | Volt (V) |
|
||||
| battery/current | R | Actual current | Ampere (A) |
|
||||
| battery/temperature" | R | Actual temperature | °C |
|
||||
| battery/alarm/overCurrentDischarge | R | Alarm: High discharge current | 0 / 1 |
|
||||
| battery/alarm/underTemperature | R | Alarm: Low temperature | 0 / 1 |
|
||||
| battery/alarm/overTemperature | R | Alarm: High temperature | 0 / 1 |
|
||||
| battery/alarm/underVoltage | R | Alarm: Low voltage | 0 / 1 |
|
||||
| battery/alarm/overVoltage | R | Alarm: High voltage | 0 / 1 |
|
||||
| battery/alarm/bmsInternal | R | Alarm: BMS internal | 0 / 1 |
|
||||
| battery/alarm/overCurrentCharge | R | | |
|
||||
| battery/warning/highCurrentDischarge | R | Warning: High discharge current | 0 / 1 |
|
||||
| battery/warning/lowTemperature | R | Warning: Low temperature | 0 / 1 |
|
||||
| battery/warning/highTemperature | R | Warning: High temperature | 0 / 1 |
|
||||
| battery/warning/lowVoltage | R | Warning: Low voltage | 0 / 1 |
|
||||
| battery/warning/highVoltage | R | Warning: High voltage | 0 / 1 |
|
||||
| battery/warning/bmsInternal | R | Warning: BMS internal | 0 / 1 |
|
||||
| battery/manufacturer | R | Manufacturer | String |
|
||||
| battery/charging/chargeEnabled | R | Charge enabled flag | 0 / 1 |
|
||||
| battery/charging/dischargeEnabled | R | Discharge enabled flag | 0 / 1 |
|
||||
| battery/charging/chargeImmediately | R | Charge immediately flag | 0 / 1 |
|
||||
|
||||
### Huawei AC charger topics
|
||||
|
||||
| Topic | R / W | Description | Value / Unit |
|
||||
| --------------------------------------- | ----- | ---------------------------------------------------- | -------------------------- |
|
||||
| huawei/cmd/limit_online_voltage | W | Online voltage (i.e. CAN bus connected) | Volt (V) |
|
||||
| huawei/cmd/limit_online_current | W | Online current (i.e. CAN bus connected) | Ampere (A) |
|
||||
| huawei/cmd/limit_offline_voltage | W | Offline voltage (i.e. CAN bus not connected) | Volt (V) |
|
||||
| huawei/cmd/limit_offline_current | W | Offline current (i.e. CAN bus not connected) | Ampere (A) |
|
||||
| huawei/cmd/mode | W | Controls GPIO output pin to switch slot detect | 0 (off) / 1 (on) / 2 (set automatically depending on online_current value) / 3 (set automatically based on Power Meter reading ) |
|
||||
| huawei/data_age | R | How old the data is | Seconds |
|
||||
| huawei/input_voltage | R | Input voltage | Volt (V) |
|
||||
| huawei/input_current | R | Input current | Ampere (A) |
|
||||
| huawei/input_power | R | Input power | Watt (W) |
|
||||
| huawei/output_voltage | R | Output voltage | Volt (V) |
|
||||
| huawei/output_current | R | Output current | Ampere (A) |
|
||||
| huawei/max_output_current | R | Maximum output current (set using the online limit) | Ampere (A) |
|
||||
| huawei/output_power | R | Output power | Watt (W) |
|
||||
| huawei/input_temp | R | Input air temperature | °C |
|
||||
| huawei/output_temp | R | Output air temperature | °C |
|
||||
| huawei/efficiency | R | Efficiency | Percentage |
|
||||
|
||||
### Power Limiter topics
|
||||
|
||||
| Topic | R / W | Description | Value |
|
||||
| --------------------------------------- | ----- | ---------------------------------------------------- | -------------------------- |
|
||||
| powerlimiter/cmd/mode | W | Power Limiter operation mode | see below |
|
||||
| powerlimiter/status/mode | R | Get Power Limiter operation mode | see below |
|
||||
|
||||
Setting any of these modes through MQTT has *no* effect if the Power Limiter is
|
||||
disabled by configuration in the web application. The Power Limiter will stay
|
||||
off in that case.
|
||||
|
||||
Three modes are implemented:
|
||||
* **0** - Normal operation: The Power Limiter works as configured through the
|
||||
web application.
|
||||
* **1** - Fully disable: The inverter is shut down and the Power Limiter stops
|
||||
operating, as if it was disabled in the web application.
|
||||
* **2** - Unconditional Solar Passthrough: The power limit is set such that all
|
||||
solar power (adjusted for efficiency) is fed into the home. This is done
|
||||
irrespective of grid consumption and without consuming energy from the
|
||||
battery, which is the key difference to the regular Power Limiter Solar
|
||||
Passthrouh feature. Essentially, the inverter mimics the behavior of a
|
||||
traditional, non-smart inverter. This can be particularly useful in scenarios
|
||||
where solar power is better stored elsewhere, such as in an electric car.
|
||||
|
||||
Loading…
Reference in New Issue
Block a user