Revert "Merge remote-tracking branch 'tbnobody/OpenDTU/master' into development"

This reverts commit eb1c2dbd8c, reversing
changes made to 0cb42a6424.

merge of v23.9.11 broke the system

include/Configuration.h

@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0-or-later
 #pragma once
 
-#include <cstdint>
+#include <Arduino.h>
 
 #define CONFIG_FILENAME "/config.json"
 #define CONFIG_VERSION 0x00011900 // 0.1.24 // make sure to clean all after change
@@ -54,9 +54,6 @@ struct INVERTER_CONFIG_T {
     bool Poll_Enable_Night;
     bool Command_Enable;
     bool Command_Enable_Night;
-    uint8_t ReachableThreshold;
-    bool ZeroRuntimeDataIfUnrechable;
-    bool ZeroYieldDayOnMidnight;
     CHANNEL_CONFIG_T channel[INV_MAX_CHAN_COUNT];
 };
 
@@ -75,18 +72,18 @@ struct POWERMETER_HTTP_PHASE_CONFIG_T {
 
 struct CONFIG_T {
     uint32_t Cfg_Version;
-    uint32_t Cfg_SaveCount;
+    uint Cfg_SaveCount;
 
     char WiFi_Ssid[WIFI_MAX_SSID_STRLEN + 1];
     char WiFi_Password[WIFI_MAX_PASSWORD_STRLEN + 1];
-    uint8_t WiFi_Ip[4];
+    byte WiFi_Ip[4];
-    uint8_t WiFi_Netmask[4];
+    byte WiFi_Netmask[4];
-    uint8_t WiFi_Gateway[4];
+    byte WiFi_Gateway[4];
-    uint8_t WiFi_Dns1[4];
+    byte WiFi_Dns1[4];
-    uint8_t WiFi_Dns2[4];
+    byte WiFi_Dns2[4];
     bool WiFi_Dhcp;
     char WiFi_Hostname[WIFI_MAX_HOSTNAME_STRLEN + 1];
-    uint32_t WiFi_ApTimeout;
+    uint WiFi_ApTimeout;
 
     char Ntp_Server[NTP_MAX_SERVER_STRLEN + 1];
     char Ntp_Timezone[NTP_MAX_TIMEZONE_STRLEN + 1];
@@ -98,7 +95,7 @@ struct CONFIG_T {
     bool Mqtt_Enabled;
     char Mqtt_Hostname[MQTT_MAX_HOSTNAME_STRLEN + 1];
     bool Mqtt_VerboseLogging;
-    uint32_t Mqtt_Port;
+    uint Mqtt_Port;
     char Mqtt_Username[MQTT_MAX_USERNAME_STRLEN + 1];
     char Mqtt_Password[MQTT_MAX_PASSWORD_STRLEN + 1];
     char Mqtt_Topic[MQTT_MAX_TOPIC_STRLEN + 1];
@@ -107,7 +104,6 @@ struct CONFIG_T {
     char Mqtt_LwtValue_Online[MQTT_MAX_LWTVALUE_STRLEN + 1];
     char Mqtt_LwtValue_Offline[MQTT_MAX_LWTVALUE_STRLEN + 1];
     uint32_t Mqtt_PublishInterval;
-    bool Mqtt_CleanSession;
 
     INVERTER_CONFIG_T Inverter[INV_MAX_COUNT];
 

include/Datastore.h

@@ -31,16 +31,16 @@ public:
     float getTotalDcIrradiation();
 
     // Amount of relevant digits for yield total
-    uint32_t getTotalAcYieldTotalDigits();
+    unsigned int getTotalAcYieldTotalDigits();
 
     // Amount of relevant digits for yield total
-    uint32_t getTotalAcYieldDayDigits();
+    unsigned int getTotalAcYieldDayDigits();
 
     // Amount of relevant digits for AC power
-    uint32_t getTotalAcPowerDigits();
+    unsigned int getTotalAcPowerDigits();
 
     // Amount of relevant digits for DC power
-    uint32_t getTotalDcPowerDigits();
+    unsigned int getTotalDcPowerDigits();
 
     // True, if at least one inverter is reachable
     bool getIsAtLeastOneReachable();
@@ -68,10 +68,10 @@ private:
     float _totalDcPowerIrradiation = 0;
     float _totalDcIrradiationInstalled = 0;
     float _totalDcIrradiation = 0;
-    uint32_t _totalAcYieldTotalDigits = 0;
+    unsigned int _totalAcYieldTotalDigits = 0;
-    uint32_t _totalAcYieldDayDigits = 0;
+    unsigned int _totalAcYieldDayDigits = 0;
-    uint32_t _totalAcPowerDigits = 0;
+    unsigned int _totalAcPowerDigits = 0;
-    uint32_t _totalDcPowerDigits = 0;
+    unsigned int _totalDcPowerDigits = 0;
     bool _isAtLeastOneReachable = false;
     bool _isAtLeastOneProducing = false;
     bool _isAllEnabledProducing = false;

include/MqttHandleInverter.h

@@ -3,7 +3,6 @@
 
 #include "Configuration.h"
 #include <Hoymiles.h>
-#include <TimeoutHelper.h>
 #include <espMqttClient.h>
 
 class MqttHandleInverterClass {
@@ -20,8 +19,6 @@ private:
     uint32_t _lastPublishStats[INV_MAX_COUNT];
     uint32_t _lastPublish;
 
-    TimeoutHelper _statsTimeout;
-
     FieldId_t _publishFields[14] = {
         FLD_UDC,
         FLD_IDC,

include/NetworkSettings.h

@@ -63,10 +63,10 @@ private:
     void NetworkEvent(WiFiEvent_t event);
     bool adminEnabled = true;
     bool forceDisconnection = false;
-    uint32_t adminTimeoutCounter = 0;
+    int adminTimeoutCounter = 0;
-    uint32_t adminTimeoutCounterMax = 0;
+    int adminTimeoutCounterMax = 0;
-    uint32_t connectTimeoutTimer = 0;
+    int connectTimeoutTimer = 0;
-    uint32_t connectRedoTimer = 0;
+    int connectRedoTimer = 0;
     uint32_t lastTimerCall = 0;
     const byte DNS_PORT = 53;
     IPAddress apIp;

include/SunPosition.h

@@ -22,8 +22,8 @@ private:
     SunSet _sun;
     bool _isDayPeriod = true;
     bool _isSunsetAvailable = true;
-    uint32_t _sunriseMinutes = 0;
+    uint _sunriseMinutes = 0;
-    uint32_t _sunsetMinutes = 0;
+    uint _sunsetMinutes = 0;
 
     uint32_t _lastUpdate = 0;
     bool _isValidInfo = false;

include/WebApi.h

@@ -8,7 +8,6 @@
 #include "WebApi_dtu.h"
 #include "WebApi_eventlog.h"
 #include "WebApi_firmware.h"
-#include "WebApi_gridprofile.h"
 #include "WebApi_inverter.h"
 #include "WebApi_limit.h"
 #include "WebApi_maintenance.h"
@@ -53,7 +52,6 @@ private:
     WebApiDtuClass _webApiDtu;
     WebApiEventlogClass _webApiEventlog;
     WebApiFirmwareClass _webApiFirmware;
-    WebApiGridProfileClass _webApiGridprofile;
     WebApiInverterClass _webApiInverter;
     WebApiLimitClass _webApiLimit;
     WebApiMaintenanceClass _webApiMaintenance;

include/WebApi_gridprofile.h

@@ -1,15 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-#pragma once
-
-#include <ESPAsyncWebServer.h>
-
-class WebApiGridProfileClass {
-public:
-    void init(AsyncWebServer* server);
-    void loop();
-
-private:
-    void onGridProfileStatus(AsyncWebServerRequest* request);
-
-    AsyncWebServer* _server;
-};

include/WebApi_ws_live.h

@@ -25,6 +25,4 @@ private:
     uint32_t _lastInvUpdateCheck = 0;
     uint32_t _lastWsCleanup = 0;
     uint32_t _newestInverterTimestamp = 0;
-
-    std::mutex _mutex;
 };

include/defaults.h

@@ -74,7 +74,6 @@
 #define MQTT_LWT_ONLINE "online"
 #define MQTT_LWT_OFFLINE "offline"
 #define MQTT_PUBLISH_INTERVAL 5U
-#define MQTT_CLEAN_SESSION true
 
 #define DTU_SERIAL 0x99978563412U
 #define DTU_POLL_INTERVAL 5U
@@ -96,8 +95,6 @@
 #define DISPLAY_CONTRAST 60U
 #define DISPLAY_LANGUAGE 0U
 
-#define REACHABLE_THRESHOLD 2U
-
 #define VEDIRECT_ENABLED false
 #define VEDIRECT_VERBOSE_LOGGING false
 #define VEDIRECT_UPDATESONLY true

lib/Hoymiles/src/Hoymiles.cpp

@@ -3,7 +3,6 @@
  * Copyright (C) 2022 Thomas Basler and others
  */
 #include "Hoymiles.h"
-#include "Utils.h"
 #include "inverters/HMS_1CH.h"
 #include "inverters/HMS_2CH.h"
 #include "inverters/HMS_4CH.h"
@@ -13,10 +12,18 @@
 #include "inverters/HM_4CH.h"
 #include <Arduino.h>
 
+#define HOY_SEMAPHORE_TAKE() \
+    do {                     \
+    } while (xSemaphoreTake(_xSemaphore, portMAX_DELAY) != pdPASS)
+#define HOY_SEMAPHORE_GIVE() xSemaphoreGive(_xSemaphore)
+
 HoymilesClass Hoymiles;
 
 void HoymilesClass::init()
 {
+    _xSemaphore = xSemaphoreCreateMutex();
+    HOY_SEMAPHORE_GIVE(); // release before first use
+
     _pollInterval = 0;
     _radioNrf.reset(new HoymilesRadio_NRF());
     _radioCmt.reset(new HoymilesRadio_CMT());
@@ -34,7 +41,7 @@ void HoymilesClass::initCMT(int8_t pin_sdio, int8_t pin_clk, int8_t pin_cs, int8
 
 void HoymilesClass::loop()
 {
-    std::lock_guard<std::mutex> lock(_mutex);
+    HOY_SEMAPHORE_TAKE();
     _radioNrf->loop();
     _radioCmt->loop();
 
@@ -50,90 +57,67 @@ void HoymilesClass::loop()
             }
 
             if (iv != nullptr && iv->getRadio()->isInitialized() && iv->getRadio()->isQueueEmpty()) {
+                _messageOutput->print("Fetch inverter: ");
+                _messageOutput->println(iv->serial(), HEX);
 
-                if (iv->getEnablePolling() || iv->getEnableCommands()) {
+                if (!iv->isReachable()) {
-                    _messageOutput->print("Fetch inverter: ");
+                    iv->sendChangeChannelRequest();
-                    _messageOutput->println(iv->serial(), HEX);
+                }
 
-                    if (!iv->isReachable()) {
+                iv->sendStatsRequest();
-                        iv->sendChangeChannelRequest();
+
+                // Fetch event log
+                bool force = iv->EventLog()->getLastAlarmRequestSuccess() == CMD_NOK;
+                iv->sendAlarmLogRequest(force);
+
+                // Fetch limit
+                if ((iv->SystemConfigPara()->getLastLimitRequestSuccess() == CMD_NOK)
+                    || ((millis() - iv->SystemConfigPara()->getLastUpdateRequest() > HOY_SYSTEM_CONFIG_PARA_POLL_INTERVAL)
+                        && (millis() - iv->SystemConfigPara()->getLastUpdateCommand() > HOY_SYSTEM_CONFIG_PARA_POLL_MIN_DURATION))) {
+                    _messageOutput->println("Request SystemConfigPara");
+                    iv->sendSystemConfigParaRequest();
+                }
+
+                // Set limit if required
+                if (iv->SystemConfigPara()->getLastLimitCommandSuccess() == CMD_NOK) {
+                    _messageOutput->println("Resend ActivePowerControl");
+                    iv->resendActivePowerControlRequest();
+                }
+
+                // Set power status if required
+                if (iv->PowerCommand()->getLastPowerCommandSuccess() == CMD_NOK) {
+                    _messageOutput->println("Resend PowerCommand");
+                    iv->resendPowerControlRequest();
+                }
+
+                // Fetch dev info (but first fetch stats)
+                if (iv->Statistics()->getLastUpdate() > 0) {
+                    bool invalidDevInfo = !iv->DevInfo()->containsValidData()
+                        && iv->DevInfo()->getLastUpdateAll() > 0
+                        && iv->DevInfo()->getLastUpdateSimple() > 0;
+
+                    if (invalidDevInfo) {
+                        _messageOutput->println("DevInfo: No Valid Data");
                     }
 
-                    iv->sendStatsRequest();
+                    if ((iv->DevInfo()->getLastUpdateAll() == 0)
-
+                        || (iv->DevInfo()->getLastUpdateSimple() == 0)
-                    // Fetch event log
+                        || invalidDevInfo) {
-                    bool force = iv->EventLog()->getLastAlarmRequestSuccess() == CMD_NOK;
+                        _messageOutput->println("Request device info");
-                    iv->sendAlarmLogRequest(force);
+                        iv->sendDevInfoRequest();
-
-                    // Fetch limit
-                    if (((millis() - iv->SystemConfigPara()->getLastUpdateRequest() > HOY_SYSTEM_CONFIG_PARA_POLL_INTERVAL)
-                            && (millis() - iv->SystemConfigPara()->getLastUpdateCommand() > HOY_SYSTEM_CONFIG_PARA_POLL_MIN_DURATION))) {
-                        _messageOutput->println("Request SystemConfigPara");
-                        iv->sendSystemConfigParaRequest();
                     }
-
-                    // Set limit if required
-                    if (iv->SystemConfigPara()->getLastLimitCommandSuccess() == CMD_NOK) {
-                        _messageOutput->println("Resend ActivePowerControl");
-                        iv->resendActivePowerControlRequest();
-                    }
-
-                    // Set power status if required
-                    if (iv->PowerCommand()->getLastPowerCommandSuccess() == CMD_NOK) {
-                        _messageOutput->println("Resend PowerCommand");
-                        iv->resendPowerControlRequest();
-                    }
-
-                    // Fetch dev info (but first fetch stats)
-                    if (iv->Statistics()->getLastUpdate() > 0) {
-                        bool invalidDevInfo = !iv->DevInfo()->containsValidData()
-                            && iv->DevInfo()->getLastUpdateAll() > 0
-                            && iv->DevInfo()->getLastUpdateSimple() > 0;
-
-                        if (invalidDevInfo) {
-                            _messageOutput->println("DevInfo: No Valid Data");
-                        }
-
-                        if ((iv->DevInfo()->getLastUpdateAll() == 0)
-                            || (iv->DevInfo()->getLastUpdateSimple() == 0)
-                            || invalidDevInfo) {
-                            _messageOutput->println("Request device info");
-                            iv->sendDevInfoRequest();
-                        }
-                    }
-
-                    // Fetch grid profile
-                    if (iv->Statistics()->getLastUpdate() > 0 && iv->GridProfile()->getLastUpdate() == 0) {
-                        iv->sendGridOnProFileParaRequest();
-                    }
-
-                    _lastPoll = millis();
                 }
 
                 if (++inverterPos >= getNumInverters()) {
                     inverterPos = 0;
                 }
-            }
 
-            // Perform housekeeping of all inverters on day change
+                _lastPoll = millis();
-            int8_t currentWeekDay = Utils::getWeekDay();
-            static int8_t lastWeekDay = -1;
-            if (lastWeekDay == -1) {
-                lastWeekDay = currentWeekDay;
-            } else {
-                if (currentWeekDay != lastWeekDay) {
-
-                    for (auto& inv : _inverters) {
-                        if (inv->getZeroYieldDayOnMidnight()) {
-                            inv->Statistics()->zeroDailyData();
-                        }
-                    }
-
-                    lastWeekDay = currentWeekDay;
-                }
             }
         }
     }
+
+    HOY_SEMAPHORE_GIVE();
 }
 
 std::shared_ptr<InverterAbstract> HoymilesClass::addInverter(const char* name, uint64_t serial)
@@ -211,8 +195,9 @@ void HoymilesClass::removeInverterBySerial(uint64_t serial)
 {
     for (uint8_t i = 0; i < _inverters.size(); i++) {
         if (_inverters[i]->serial() == serial) {
-            std::lock_guard<std::mutex> lock(_mutex);
+            HOY_SEMAPHORE_TAKE();
             _inverters.erase(_inverters.begin() + i);
+            HOY_SEMAPHORE_GIVE();
             return;
         }
     }

lib/Hoymiles/src/Hoymiles.h

@@ -45,7 +45,7 @@ private:
     std::unique_ptr<HoymilesRadio_NRF> _radioNrf;
     std::unique_ptr<HoymilesRadio_CMT> _radioCmt;
 
-    std::mutex _mutex;
+    SemaphoreHandle_t _xSemaphore;
 
     uint32_t _pollInterval = 0;
     bool _verboseLogging = true;

lib/Hoymiles/src/Utils.cpp

@@ -1,15 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2023 Thomas Basler and others
- */
-#include "Utils.h"
-#include <time.h>
-
-uint8_t Utils::getWeekDay()
-{
-    time_t raw;
-    struct tm info;
-    time(&raw);
-    localtime_r(&raw, &info);
-    return info.tm_mday;
-}

lib/Hoymiles/src/Utils.h

@@ -1,9 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-#pragma once
-
-#include <cstdint>
-
-class Utils {
-public:
-    static uint8_t getWeekDay();
-};

lib/Hoymiles/src/commands/GridOnProFilePara.cpp

@@ -1,40 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2022 Thomas Basler and others
- */
-#include "GridOnProFilePara.h"
-#include "Hoymiles.h"
-#include "inverters/InverterAbstract.h"
-
-GridOnProFilePara::GridOnProFilePara(uint64_t target_address, uint64_t router_address, time_t time)
-    : MultiDataCommand(target_address, router_address)
-{
-    setTime(time);
-    setDataType(0x02);
-    setTimeout(500);
-}
-
-String GridOnProFilePara::getCommandName()
-{
-    return "GridOnProFilePara";
-}
-
-bool GridOnProFilePara::handleResponse(InverterAbstract* inverter, fragment_t fragment[], uint8_t max_fragment_id)
-{
-    // Check CRC of whole payload
-    if (!MultiDataCommand::handleResponse(inverter, fragment, max_fragment_id)) {
-        return false;
-    }
-
-    // Move all fragments into target buffer
-    uint8_t offs = 0;
-    inverter->GridProfile()->beginAppendFragment();
-    inverter->GridProfile()->clearBuffer();
-    for (uint8_t i = 0; i < max_fragment_id; i++) {
-        inverter->GridProfile()->appendFragment(offs, fragment[i].fragment, fragment[i].len);
-        offs += (fragment[i].len);
-    }
-    inverter->GridProfile()->endAppendFragment();
-    inverter->GridProfile()->setLastUpdate(millis());
-    return true;
-}

lib/Hoymiles/src/commands/GridOnProFilePara.h

@@ -1,13 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-#pragma once
-
-#include "MultiDataCommand.h"
-
-class GridOnProFilePara : public MultiDataCommand {
-public:
-    explicit GridOnProFilePara(uint64_t target_address = 0, uint64_t router_address = 0, time_t time = 0);
-
-    virtual String getCommandName();
-
-    virtual bool handleResponse(InverterAbstract* inverter, fragment_t fragment[], uint8_t max_fragment_id);
-};

lib/Hoymiles/src/commands/README.md

@@ -8,7 +8,6 @@
     * AlarmDataCommand
     * DevInfoAllCommand
     * DevInfoSimpleCommand
-    * GridOnProFilePara
     * RealTimeRunDataCommand
     * SystemConfigParaCommand
   * ParaSetCommand

lib/Hoymiles/src/commands/RealTimeRunDataCommand.cpp

@@ -55,9 +55,4 @@ bool RealTimeRunDataCommand::handleResponse(InverterAbstract* inverter, fragment
 void RealTimeRunDataCommand::gotTimeout(InverterAbstract* inverter)
 {
     inverter->Statistics()->incrementRxFailureCount();
-
-    if (inverter->getZeroValuesIfUnreachable() && !inverter->isReachable()) {
-        Hoymiles.getMessageOutput()->println("Set runtime data to zero");
-        inverter->Statistics()->zeroRuntimeData();
-    }
 }

lib/Hoymiles/src/commands/SystemConfigParaCommand.cpp

@@ -3,7 +3,6 @@
  * Copyright (C) 2022 Thomas Basler and others
  */
 #include "SystemConfigParaCommand.h"
-#include "Hoymiles.h"
 #include "inverters/InverterAbstract.h"
 
 SystemConfigParaCommand::SystemConfigParaCommand(uint64_t target_address, uint64_t router_address, time_t time)
@@ -26,18 +25,6 @@ bool SystemConfigParaCommand::handleResponse(InverterAbstract* inverter, fragmen
         return false;
     }
 
-    // Check if at least all required bytes are received
-    // In case of low power in the inverter it occours that some incomplete fragments
-    // with a valid CRC are received.
-    uint8_t fragmentsSize = getTotalFragmentSize(fragment, max_fragment_id);
-    uint8_t expectedSize = inverter->SystemConfigPara()->getExpectedByteCount();
-    if (fragmentsSize < expectedSize) {
-        Hoymiles.getMessageOutput()->printf("ERROR in %s: Received fragment size: %d, min expected size: %d\r\n",
-            getCommandName().c_str(), fragmentsSize, expectedSize);
-
-        return false;
-    }
-
     // Move all fragments into target buffer
     uint8_t offs = 0;
     inverter->SystemConfigPara()->beginAppendFragment();

lib/Hoymiles/src/inverters/HM_Abstract.cpp

@@ -8,7 +8,6 @@
 #include "commands/AlarmDataCommand.h"
 #include "commands/DevInfoAllCommand.h"
 #include "commands/DevInfoSimpleCommand.h"
-#include "commands/GridOnProFilePara.h"
 #include "commands/PowerControlCommand.h"
 #include "commands/RealTimeRunDataCommand.h"
 #include "commands/SystemConfigParaCommand.h"
@@ -211,26 +210,4 @@ bool HM_Abstract::resendPowerControlRequest()
         return false;
         break;
     }
-}
+}
-
-bool HM_Abstract::sendGridOnProFileParaRequest()
-{
-    if (!getEnablePolling()) {
-        return false;
-    }
-
-    struct tm timeinfo;
-    if (!getLocalTime(&timeinfo, 5)) {
-        return false;
-    }
-
-    time_t now;
-    time(&now);
-
-    auto cmd = _radio->prepareCommand<GridOnProFilePara>();
-    cmd->setTime(now);
-    cmd->setTargetAddress(serial());
-    _radio->enqueCommand(cmd);
-
-    return true;
-}

lib/Hoymiles/src/inverters/HM_Abstract.h

@@ -15,7 +15,6 @@ public:
     bool sendPowerControlRequest(bool turnOn);
     bool sendRestartControlRequest();
     bool resendPowerControlRequest();
-    bool sendGridOnProFileParaRequest();
 
 private:
     uint8_t _lastAlarmLogCnt = 0;

lib/Hoymiles/src/inverters/InverterAbstract.cpp

@@ -20,7 +20,6 @@ InverterAbstract::InverterAbstract(HoymilesRadio* radio, uint64_t serial)
 
     _alarmLogParser.reset(new AlarmLogParser());
     _devInfoParser.reset(new DevInfoParser());
-    _gridProfileParser.reset(new GridProfileParser());
     _powerCommandParser.reset(new PowerCommandParser());
     _statisticsParser.reset(new StatisticsParser());
     _systemConfigParaParser.reset(new SystemConfigParaParser());
@@ -74,7 +73,7 @@ bool InverterAbstract::isProducing()
 
 bool InverterAbstract::isReachable()
 {
-    return _enablePolling && Statistics()->getRxFailureCount() <= _reachableThreshold;
+    return _enablePolling && Statistics()->getRxFailureCount() <= MAX_ONLINE_FAILURE_COUNT;
 }
 
 void InverterAbstract::setEnablePolling(bool enabled)
@@ -97,36 +96,6 @@ bool InverterAbstract::getEnableCommands()
     return _enableCommands;
 }
 
-void InverterAbstract::setReachableThreshold(uint8_t threshold)
-{
-    _reachableThreshold = threshold;
-}
-
-uint8_t InverterAbstract::getReachableThreshold()
-{
-    return _reachableThreshold;
-}
-
-void InverterAbstract::setZeroValuesIfUnreachable(bool enabled)
-{
-    _zeroValuesIfUnreachable = enabled;
-}
-
-bool InverterAbstract::getZeroValuesIfUnreachable()
-{
-    return _zeroValuesIfUnreachable;
-}
-
-void InverterAbstract::setZeroYieldDayOnMidnight(bool enabled)
-{
-    _zeroYieldDayOnMidnight = enabled;
-}
-
-bool InverterAbstract::getZeroYieldDayOnMidnight()
-{
-    return _zeroYieldDayOnMidnight;
-}
-
 bool InverterAbstract::sendChangeChannelRequest()
 {
     return false;
@@ -147,11 +116,6 @@ DevInfoParser* InverterAbstract::DevInfo()
     return _devInfoParser.get();
 }
 
-GridProfileParser* InverterAbstract::GridProfile()
-{
-    return _gridProfileParser.get();
-}
-
 PowerCommandParser* InverterAbstract::PowerCommand()
 {
     return _powerCommandParser.get();

lib/Hoymiles/src/inverters/InverterAbstract.h

@@ -4,7 +4,6 @@
 #include "../commands/ActivePowerControlCommand.h"
 #include "../parser/AlarmLogParser.h"
 #include "../parser/DevInfoParser.h"
-#include "../parser/GridProfileParser.h"
 #include "../parser/PowerCommandParser.h"
 #include "../parser/StatisticsParser.h"
 #include "../parser/SystemConfigParaParser.h"
@@ -25,6 +24,7 @@ enum {
 };
 
 #define MAX_RF_FRAGMENT_COUNT 13
+#define MAX_ONLINE_FAILURE_COUNT 2
 
 class CommandAbstract;
 
@@ -49,15 +49,6 @@ public:
     void setEnableCommands(bool enabled);
     bool getEnableCommands();
 
-    void setReachableThreshold(uint8_t threshold);
-    uint8_t getReachableThreshold();
-
-    void setZeroValuesIfUnreachable(bool enabled);
-    bool getZeroValuesIfUnreachable();
-
-    void setZeroYieldDayOnMidnight(bool enabled);
-    bool getZeroYieldDayOnMidnight();
-
     void clearRxFragmentBuffer();
     void addRxFragment(uint8_t fragment[], uint8_t len);
     uint8_t verifyAllFragments(CommandAbstract* cmd);
@@ -72,13 +63,11 @@ public:
     virtual bool sendRestartControlRequest() = 0;
     virtual bool resendPowerControlRequest() = 0;
     virtual bool sendChangeChannelRequest();
-    virtual bool sendGridOnProFileParaRequest() = 0;
 
     HoymilesRadio* getRadio();
 
     AlarmLogParser* EventLog();
     DevInfoParser* DevInfo();
-    GridProfileParser* GridProfile();
     PowerCommandParser* PowerCommand();
     StatisticsParser* Statistics();
     SystemConfigParaParser* SystemConfigPara();
@@ -98,14 +87,8 @@ private:
     bool _enablePolling = true;
     bool _enableCommands = true;
 
-    uint8_t _reachableThreshold = 3;
-
-    bool _zeroValuesIfUnreachable = false;
-    bool _zeroYieldDayOnMidnight = false;
-
     std::unique_ptr<AlarmLogParser> _alarmLogParser;
     std::unique_ptr<DevInfoParser> _devInfoParser;
-    std::unique_ptr<GridProfileParser> _gridProfileParser;
     std::unique_ptr<PowerCommandParser> _powerCommandParser;
     std::unique_ptr<StatisticsParser> _statisticsParser;
     std::unique_ptr<SystemConfigParaParser> _systemConfigParaParser;

lib/Hoymiles/src/parser/AlarmLogParser.cpp

@@ -86,9 +86,16 @@ const std::array<const AlarmMessage_t, ALARM_MSG_COUNT> AlarmLogParser::_alarmMe
     { AlarmMessageType_t::ALL, 9000, "Microinverter is suspected of being stolen" },
 } };
 
+#define HOY_SEMAPHORE_TAKE() \
+    do {                     \
+    } while (xSemaphoreTake(_xSemaphore, portMAX_DELAY) != pdPASS)
+#define HOY_SEMAPHORE_GIVE() xSemaphoreGive(_xSemaphore)
+
 AlarmLogParser::AlarmLogParser()
     : Parser()
 {
+    _xSemaphore = xSemaphoreCreateMutex();
+    HOY_SEMAPHORE_GIVE(); // release before first use
     clearBuffer();
 }
 
@@ -108,6 +115,16 @@ void AlarmLogParser::appendFragment(uint8_t offset, uint8_t* payload, uint8_t le
     _alarmLogLength += len;
 }
 
+void AlarmLogParser::beginAppendFragment()
+{
+    HOY_SEMAPHORE_TAKE();
+}
+
+void AlarmLogParser::endAppendFragment()
+{
+    HOY_SEMAPHORE_GIVE();
+}
+
 uint8_t AlarmLogParser::getEntryCount()
 {
     if (_alarmLogLength < 2) {

lib/Hoymiles/src/parser/AlarmLogParser.h

@@ -1,6 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0-or-later
 #pragma once
 #include "Parser.h"
+#include <Arduino.h>
 #include <array>
 #include <cstdint>
 
@@ -33,6 +34,8 @@ public:
     AlarmLogParser();
     void clearBuffer();
     void appendFragment(uint8_t offset, uint8_t* payload, uint8_t len);
+    void beginAppendFragment();
+    void endAppendFragment();
 
     uint8_t getEntryCount();
     void getLogEntry(uint8_t entryId, AlarmLogEntry_t* entry);
@@ -53,4 +56,6 @@ private:
     AlarmMessageType_t _messageType = AlarmMessageType_t::ALL;
 
     static const std::array<const AlarmMessage_t, ALARM_MSG_COUNT> _alarmMessages;
+
+    SemaphoreHandle_t _xSemaphore;
 };

lib/Hoymiles/src/parser/DevInfoParser.cpp

@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-or-later
 /*
- * Copyright (C) 2022 - 2023 Thomas Basler and others
+ * Copyright (C) 2022 Thomas Basler and others
  */
 #include "DevInfoParser.h"
 #include "../Hoymiles.h"
@@ -46,9 +46,16 @@ const devInfo_t devInfo[] = {
     { { 0x10, 0x33, 0x31, ALL }, 2250, "HMT-2250" } // 01
 };
 
+#define HOY_SEMAPHORE_TAKE() \
+    do {                     \
+    } while (xSemaphoreTake(_xSemaphore, portMAX_DELAY) != pdPASS)
+#define HOY_SEMAPHORE_GIVE() xSemaphoreGive(_xSemaphore)
+
 DevInfoParser::DevInfoParser()
     : Parser()
 {
+    _xSemaphore = xSemaphoreCreateMutex();
+    HOY_SEMAPHORE_GIVE(); // release before first use
     clearBufferSimple();
     clearBufferAll();
 }
@@ -85,6 +92,16 @@ void DevInfoParser::appendFragmentSimple(uint8_t offset, uint8_t* payload, uint8
     _devInfoSimpleLength += len;
 }
 
+void DevInfoParser::beginAppendFragment()
+{
+    HOY_SEMAPHORE_TAKE();
+}
+
+void DevInfoParser::endAppendFragment()
+{
+    HOY_SEMAPHORE_GIVE();
+}
+
 uint32_t DevInfoParser::getLastUpdateAll()
 {
     return _lastUpdateAll;

lib/Hoymiles/src/parser/DevInfoParser.h

@@ -1,6 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0-or-later
 #pragma once
 #include "Parser.h"
+#include <Arduino.h>
 
 #define DEV_INFO_SIZE 20
 
@@ -13,6 +14,9 @@ public:
     void clearBufferSimple();
     void appendFragmentSimple(uint8_t offset, uint8_t* payload, uint8_t len);
 
+    void beginAppendFragment();
+    void endAppendFragment();
+
     uint32_t getLastUpdateAll();
     void setLastUpdateAll(uint32_t lastUpdate);
 
@@ -43,4 +47,6 @@ private:
 
     uint8_t _payloadDevInfoSimple[DEV_INFO_SIZE] = {};
     uint8_t _devInfoSimpleLength = 0;
+
+    SemaphoreHandle_t _xSemaphore;
 };

lib/Hoymiles/src/parser/GridProfileParser.cpp

@@ -1,40 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2023 Thomas Basler and others
- */
-#include "GridProfileParser.h"
-#include "../Hoymiles.h"
-#include <cstring>
-
-GridProfileParser::GridProfileParser()
-    : Parser()
-{
-    clearBuffer();
-}
-
-void GridProfileParser::clearBuffer()
-{
-    memset(_payloadGridProfile, 0, GRID_PROFILE_SIZE);
-    _gridProfileLength = 0;
-}
-
-void GridProfileParser::appendFragment(uint8_t offset, uint8_t* payload, uint8_t len)
-{
-    if (offset + len > GRID_PROFILE_SIZE) {
-        Hoymiles.getMessageOutput()->printf("FATAL: (%s, %d) grid profile packet too large for buffer\r\n", __FILE__, __LINE__);
-        return;
-    }
-    memcpy(&_payloadGridProfile[offset], payload, len);
-    _gridProfileLength += len;
-}
-
-std::vector<uint8_t> GridProfileParser::getRawData()
-{
-    std::vector<uint8_t> ret;
-    HOY_SEMAPHORE_TAKE();
-    for (uint8_t i = 0; i < GRID_PROFILE_SIZE; i++) {
-        ret.push_back(_payloadGridProfile[i]);
-    }
-    HOY_SEMAPHORE_GIVE();
-    return ret;
-}

lib/Hoymiles/src/parser/GridProfileParser.h

@@ -1,18 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-#pragma once
-#include "Parser.h"
-
-#define GRID_PROFILE_SIZE 141
-
-class GridProfileParser : public Parser {
-public:
-    GridProfileParser();
-    void clearBuffer();
-    void appendFragment(uint8_t offset, uint8_t* payload, uint8_t len);
-
-    std::vector<uint8_t> getRawData();
-
-private:
-    uint8_t _payloadGridProfile[GRID_PROFILE_SIZE] = {};
-    uint8_t _gridProfileLength = 0;
-};

lib/Hoymiles/src/parser/Parser.cpp

@@ -1,15 +1,9 @@
 // SPDX-License-Identifier: GPL-2.0-or-later
 /*
- * Copyright (C) 2022 - 2023 Thomas Basler and others
+ * Copyright (C) 2022 Thomas Basler and others
  */
 #include "Parser.h"
 
-Parser::Parser()
-{
-    _xSemaphore = xSemaphoreCreateMutex();
-    HOY_SEMAPHORE_GIVE(); // release before first use
-}
-
 uint32_t Parser::getLastUpdate()
 {
     return _lastUpdate;
@@ -18,14 +12,4 @@ uint32_t Parser::getLastUpdate()
 void Parser::setLastUpdate(uint32_t lastUpdate)
 {
     _lastUpdate = lastUpdate;
-}
-
-void Parser::beginAppendFragment()
-{
-    HOY_SEMAPHORE_TAKE();
-}
-
-void Parser::endAppendFragment()
-{
-    HOY_SEMAPHORE_GIVE();
 }

lib/Hoymiles/src/parser/Parser.h

@@ -1,13 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0-or-later
 #pragma once
-#include <Arduino.h>
 #include <cstdint>
 
-#define HOY_SEMAPHORE_TAKE() \
-    do {                     \
-    } while (xSemaphoreTake(_xSemaphore, portMAX_DELAY) != pdPASS)
-#define HOY_SEMAPHORE_GIVE() xSemaphoreGive(_xSemaphore)
-
 typedef enum {
     CMD_OK,
     CMD_NOK,
@@ -16,16 +10,9 @@ typedef enum {
 
 class Parser {
 public:
-    Parser();
     uint32_t getLastUpdate();
     void setLastUpdate(uint32_t lastUpdate);
 
-    void beginAppendFragment();
-    void endAppendFragment();
-
-protected:
-    SemaphoreHandle_t _xSemaphore;
-
 private:
     uint32_t _lastUpdate = 0;
 };

lib/Hoymiles/src/parser/PowerCommandParser.cpp

@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-or-later
 /*
- * Copyright (C) 2022 - 2023 Thomas Basler and others
+ * Copyright (C) 2022 Thomas Basler and others
  */
 #include "PowerCommandParser.h"
 

lib/Hoymiles/src/parser/PowerCommandParser.h

@@ -1,6 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0-or-later
 #pragma once
 #include "Parser.h"
+#include <Arduino.h>
 
 class PowerCommandParser : public Parser {
 public:

lib/Hoymiles/src/parser/StatisticsParser.cpp

@@ -1,10 +1,15 @@
 // SPDX-License-Identifier: GPL-2.0-or-later
 /*
- * Copyright (C) 2022 - 2023 Thomas Basler and others
+ * Copyright (C) 2022 Thomas Basler and others
  */
 #include "StatisticsParser.h"
 #include "../Hoymiles.h"
 
+#define HOY_SEMAPHORE_TAKE() \
+    do {                     \
+    } while (xSemaphoreTake(_xSemaphore, portMAX_DELAY) != pdPASS)
+#define HOY_SEMAPHORE_GIVE() xSemaphoreGive(_xSemaphore)
+
 static float calcYieldTotalCh0(StatisticsParser* iv, uint8_t arg0);
 static float calcYieldDayCh0(StatisticsParser* iv, uint8_t arg0);
 static float calcUdcCh(StatisticsParser* iv, uint8_t arg0);
@@ -28,35 +33,11 @@ const calcFunc_t calcFunctions[] = {
     { CALC_IRR_CH, &calcIrradiation }
 };
 
-const FieldId_t runtimeFields[] = {
-    FLD_UDC,
-    FLD_IDC,
-    FLD_PDC,
-    FLD_UAC,
-    FLD_IAC,
-    FLD_PAC,
-    FLD_F,
-    FLD_T,
-    FLD_PF,
-    FLD_Q,
-    FLD_UAC_1N,
-    FLD_UAC_2N,
-    FLD_UAC_3N,
-    FLD_UAC_12,
-    FLD_UAC_23,
-    FLD_UAC_31,
-    FLD_IAC_1,
-    FLD_IAC_2,
-    FLD_IAC_3,
-};
-
-const FieldId_t dailyProductionFields[] = {
-    FLD_YD,
-};
-
 StatisticsParser::StatisticsParser()
     : Parser()
 {
+    _xSemaphore = xSemaphoreCreateMutex();
+    HOY_SEMAPHORE_GIVE(); // release before first use
     clearBuffer();
 }
 
@@ -94,6 +75,16 @@ void StatisticsParser::appendFragment(uint8_t offset, uint8_t* payload, uint8_t
     _statisticLength += len;
 }
 
+void StatisticsParser::beginAppendFragment()
+{
+    HOY_SEMAPHORE_TAKE();
+}
+
+void StatisticsParser::endAppendFragment()
+{
+    HOY_SEMAPHORE_GIVE();
+}
+
 const byteAssign_t* StatisticsParser::getAssignmentByChannelField(ChannelType_t type, ChannelNum_t channel, FieldId_t fieldId)
 {
     for (uint8_t i = 0; i < _byteAssignmentSize; i++) {
@@ -159,47 +150,6 @@ float StatisticsParser::getChannelFieldValue(ChannelType_t type, ChannelNum_t ch
     return 0;
 }
 
-bool StatisticsParser::setChannelFieldValue(ChannelType_t type, ChannelNum_t channel, FieldId_t fieldId, float value)
-{
-    const byteAssign_t* pos = getAssignmentByChannelField(type, channel, fieldId);
-    fieldSettings_t* setting = getSettingByChannelField(type, channel, fieldId);
-
-    if (pos == NULL) {
-        return false;
-    }
-
-    uint8_t ptr = pos->start + pos->num - 1;
-    uint8_t end = pos->start;
-    uint16_t div = pos->div;
-
-    if (CMD_CALC == div) {
-        return false;
-    }
-
-    if (setting != NULL) {
-        value -= setting->offset;
-    }
-    value *= static_cast<float>(div);
-
-    uint32_t val = 0;
-    if (pos->isSigned && pos->num == 2) {
-        val = static_cast<uint32_t>(static_cast<int16_t>(value));
-    } else if (pos->isSigned && pos->num == 4) {
-        val = static_cast<uint32_t>(static_cast<int32_t>(value));
-    } else {
-        val = static_cast<uint32_t>(value);
-    }
-
-    HOY_SEMAPHORE_TAKE();
-    do {
-        _payloadStatistic[ptr] = val;
-        val >>= 8;
-    } while (--ptr >= end);
-    HOY_SEMAPHORE_GIVE();
-
-    return true;
-}
-
 String StatisticsParser::getChannelFieldValueString(ChannelType_t type, ChannelNum_t channel, FieldId_t fieldId)
 {
     return String(
@@ -303,30 +253,6 @@ uint32_t StatisticsParser::getRxFailureCount()
     return _rxFailureCount;
 }
 
-void StatisticsParser::zeroRuntimeData()
-{
-    zeroFields(runtimeFields);
-}
-
-void StatisticsParser::zeroDailyData()
-{
-    zeroFields(dailyProductionFields);
-}
-
-void StatisticsParser::zeroFields(const FieldId_t* fields)
-{
-    // Loop all channels
-    for (auto& t : getChannelTypes()) {
-        for (auto& c : getChannelsByType(t)) {
-            for (uint8_t i = 0; i < (sizeof(runtimeFields) / sizeof(runtimeFields[0])); i++) {
-                if (hasChannelFieldValue(t, c, fields[i])) {
-                    setChannelFieldValue(t, c, fields[i], 0);
-                }
-            }
-        }
-    }
-}
-
 static float calcYieldTotalCh0(StatisticsParser* iv, uint8_t arg0)
 {
     float yield = 0;

lib/Hoymiles/src/parser/StatisticsParser.h

@@ -1,6 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0-or-later
 #pragma once
 #include "Parser.h"
+#include <Arduino.h>
 #include <cstdint>
 #include <list>
 
@@ -106,6 +107,8 @@ public:
     StatisticsParser();
     void clearBuffer();
     void appendFragment(uint8_t offset, uint8_t* payload, uint8_t len);
+    void beginAppendFragment();
+    void endAppendFragment();
 
     void setByteAssignment(const byteAssign_t* byteAssignment, uint8_t size);
 
@@ -122,8 +125,6 @@ public:
     const char* getChannelFieldName(ChannelType_t type, ChannelNum_t channel, FieldId_t fieldId);
     uint8_t getChannelFieldDigits(ChannelType_t type, ChannelNum_t channel, FieldId_t fieldId);
 
-    bool setChannelFieldValue(ChannelType_t type, ChannelNum_t channel, FieldId_t fieldId, float value);
-
     float getChannelFieldOffset(ChannelType_t type, ChannelNum_t channel, FieldId_t fieldId);
     void setChannelFieldOffset(ChannelType_t type, ChannelNum_t channel, FieldId_t fieldId, float offset);
 
@@ -138,12 +139,7 @@ public:
     void incrementRxFailureCount();
     uint32_t getRxFailureCount();
 
-    void zeroRuntimeData();
-    void zeroDailyData();
-
 private:
-    void zeroFields(const FieldId_t* fields);
-
     uint8_t _payloadStatistic[STATISTIC_PACKET_SIZE] = {};
     uint8_t _statisticLength = 0;
     uint16_t _stringMaxPower[CH_CNT];
@@ -154,4 +150,6 @@ private:
     std::list<fieldSettings_t> _fieldSettings;
 
     uint32_t _rxFailureCount = 0;
+
+    SemaphoreHandle_t _xSemaphore;
 };

lib/Hoymiles/src/parser/SystemConfigParaParser.cpp

@@ -1,14 +1,21 @@
 // SPDX-License-Identifier: GPL-2.0-or-later
 /*
- * Copyright (C) 2022 - 2023 Thomas Basler and others
+ * Copyright (C) 2022 Thomas Basler and others
  */
 #include "SystemConfigParaParser.h"
 #include "../Hoymiles.h"
 #include <cstring>
 
+#define HOY_SEMAPHORE_TAKE() \
+    do {                     \
+    } while (xSemaphoreTake(_xSemaphore, portMAX_DELAY) != pdPASS)
+#define HOY_SEMAPHORE_GIVE() xSemaphoreGive(_xSemaphore)
+
 SystemConfigParaParser::SystemConfigParaParser()
     : Parser()
 {
+    _xSemaphore = xSemaphoreCreateMutex();
+    HOY_SEMAPHORE_GIVE(); // release before first use
     clearBuffer();
 }
 
@@ -28,6 +35,16 @@ void SystemConfigParaParser::appendFragment(uint8_t offset, uint8_t* payload, ui
     _payloadLength += len;
 }
 
+void SystemConfigParaParser::beginAppendFragment()
+{
+    HOY_SEMAPHORE_TAKE();
+}
+
+void SystemConfigParaParser::endAppendFragment()
+{
+    HOY_SEMAPHORE_GIVE();
+}
+
 float SystemConfigParaParser::getLimitPercent()
 {
     HOY_SEMAPHORE_TAKE();
@@ -84,9 +101,4 @@ void SystemConfigParaParser::setLastUpdateRequest(uint32_t lastUpdate)
 {
     _lastUpdateRequest = lastUpdate;
     setLastUpdate(lastUpdate);
-}
+}
-
-uint8_t SystemConfigParaParser::getExpectedByteCount()
-{
-    return SYSTEM_CONFIG_PARA_SIZE;
-}

lib/Hoymiles/src/parser/SystemConfigParaParser.h

@@ -1,6 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0-or-later
 #pragma once
 #include "Parser.h"
+#include <Arduino.h>
 
 #define SYSTEM_CONFIG_PARA_SIZE 16
 
@@ -9,6 +10,8 @@ public:
     SystemConfigParaParser();
     void clearBuffer();
     void appendFragment(uint8_t offset, uint8_t* payload, uint8_t len);
+    void beginAppendFragment();
+    void endAppendFragment();
 
     float getLimitPercent();
     void setLimitPercent(float value);
@@ -23,9 +26,6 @@ public:
     uint32_t getLastUpdateRequest();
     void setLastUpdateRequest(uint32_t lastUpdate);
 
-    // Returns 1 based amount of expected bytes of data
-    uint8_t getExpectedByteCount();
-
 private:
     uint8_t _payload[SYSTEM_CONFIG_PARA_SIZE];
     uint8_t _payloadLength;
@@ -35,4 +35,6 @@ private:
 
     uint32_t _lastUpdateCommand = 0;
     uint32_t _lastUpdateRequest = 0;
+
+    SemaphoreHandle_t _xSemaphore;
 };

platformio.ini

@@ -19,7 +19,7 @@ extra_configs =
 custom_ci_action = generic,generic_esp32,generic_esp32s3,generic_esp32s3_usb
 
 framework = arduino
-platform = espressif32@6.4.0
+platform = espressif32@6.3.2
 
 build_flags =
     -DCOMPONENT_EMBED_FILES=webapp_dist/index.html.gz:webapp_dist/zones.json.gz:webapp_dist/favicon.ico:webapp_dist/favicon.png:webapp_dist/js/app.js.gz
@@ -33,7 +33,7 @@ build_unflags =
 lib_deps =
     https://github.com/yubox-node-org/ESPAsyncWebServer
     bblanchon/ArduinoJson @ ^6.21.3
-    https://github.com/bertmelis/espMqttClient.git#v1.4.5
+    https://github.com/bertmelis/espMqttClient.git#v1.4.4
     nrf24/RF24 @ ^1.4.7
     olikraus/U8g2 @ ^2.35.4
     buelowp/sunset @ ^1.1.7

src/Configuration.cpp

@@ -59,7 +59,6 @@ bool ConfigurationClass::write()
     mqtt["topic"] = config.Mqtt_Topic;
     mqtt["retain"] = config.Mqtt_Retain;
     mqtt["publish_interval"] = config.Mqtt_PublishInterval;
-    mqtt["clean_session"] = config.Mqtt_CleanSession;
 
     JsonObject mqtt_lwt = mqtt.createNestedObject("lwt");
     mqtt_lwt["topic"] = config.Mqtt_LwtTopic;
@@ -112,9 +111,6 @@ bool ConfigurationClass::write()
         inv["poll_enable_night"] = config.Inverter[i].Poll_Enable_Night;
         inv["command_enable"] = config.Inverter[i].Command_Enable;
         inv["command_enable_night"] = config.Inverter[i].Command_Enable_Night;
-        inv["reachable_threshold"] = config.Inverter[i].ReachableThreshold;
-        inv["zero_runtime"] = config.Inverter[i].ZeroRuntimeDataIfUnrechable;
-        inv["zero_day"] = config.Inverter[i].ZeroYieldDayOnMidnight;
 
         JsonArray channel = inv.createNestedArray("channel");
         for (uint8_t c = 0; c < INV_MAX_CHAN_COUNT; c++) {
@@ -282,7 +278,6 @@ bool ConfigurationClass::read()
     strlcpy(config.Mqtt_Topic, mqtt["topic"] | MQTT_TOPIC, sizeof(config.Mqtt_Topic));
     config.Mqtt_Retain = mqtt["retain"] | MQTT_RETAIN;
     config.Mqtt_PublishInterval = mqtt["publish_interval"] | MQTT_PUBLISH_INTERVAL;
-    config.Mqtt_CleanSession = mqtt["clean_session"] | MQTT_CLEAN_SESSION;
 
     JsonObject mqtt_lwt = mqtt["lwt"];
     strlcpy(config.Mqtt_LwtTopic, mqtt_lwt["topic"] | MQTT_LWT_TOPIC, sizeof(config.Mqtt_LwtTopic));
@@ -336,9 +331,6 @@ bool ConfigurationClass::read()
         config.Inverter[i].Poll_Enable_Night = inv["poll_enable_night"] | true;
         config.Inverter[i].Command_Enable = inv["command_enable"] | true;
         config.Inverter[i].Command_Enable_Night = inv["command_enable_night"] | true;
-        config.Inverter[i].ReachableThreshold = inv["reachable_threshold"] | REACHABLE_THRESHOLD;
-        config.Inverter[i].ZeroRuntimeDataIfUnrechable = inv["zero_runtime"] | false;
-        config.Inverter[i].ZeroYieldDayOnMidnight = inv["zero_day"] | false;
 
         JsonArray channel = inv["channel"];
         for (uint8_t c = 0; c < INV_MAX_CHAN_COUNT; c++) {

src/Datastore.cpp

@@ -151,25 +151,25 @@ float DatastoreClass::getTotalDcIrradiation()
     return _totalDcIrradiation;
 }
 
-uint32_t DatastoreClass::getTotalAcYieldTotalDigits()
+unsigned int DatastoreClass::getTotalAcYieldTotalDigits()
 {
     std::lock_guard<std::mutex> lock(_mutex);
     return _totalAcYieldTotalDigits;
 }
 
-uint32_t DatastoreClass::getTotalAcYieldDayDigits()
+unsigned int DatastoreClass::getTotalAcYieldDayDigits()
 {
     std::lock_guard<std::mutex> lock(_mutex);
     return _totalAcYieldDayDigits;
 }
 
-uint32_t DatastoreClass::getTotalAcPowerDigits()
+unsigned int DatastoreClass::getTotalAcPowerDigits()
 {
     std::lock_guard<std::mutex> lock(_mutex);
     return _totalAcPowerDigits;
 }
 
-uint32_t DatastoreClass::getTotalDcPowerDigits()
+unsigned int DatastoreClass::getTotalDcPowerDigits()
 {
     std::lock_guard<std::mutex> lock(_mutex);
     return _totalDcPowerDigits;

src/InverterSettings.cpp

@@ -74,9 +74,6 @@ void InverterSettingsClass::init()
                     config.Inverter[i].Serial);
 
                 if (inv != nullptr) {
-                    inv->setReachableThreshold(config.Inverter[i].ReachableThreshold);
-                    inv->setZeroValuesIfUnreachable(config.Inverter[i].ZeroRuntimeDataIfUnrechable);
-                    inv->setZeroYieldDayOnMidnight(config.Inverter[i].ZeroYieldDayOnMidnight);
                     for (uint8_t c = 0; c < INV_MAX_CHAN_COUNT; c++) {
                         inv->Statistics()->setStringMaxPower(c, config.Inverter[i].channel[c].MaxChannelPower);
                         inv->Statistics()->setChannelFieldOffset(TYPE_DC, static_cast<ChannelNum_t>(c), FLD_YT, config.Inverter[i].channel[c].YieldTotalOffset);

src/MqttHandleHass.cpp

@@ -134,7 +134,7 @@ void MqttHandleHassClass::publishField(std::shared_ptr<InverterAbstract> inv, Ch
         createDeviceInfo(deviceObj, inv);
 
         if (Configuration.get().Mqtt_Hass_Expire) {
-            root["exp_aft"] = Hoymiles.getNumInverters() * max<uint32_t>(Hoymiles.PollInterval(), Configuration.get().Mqtt_PublishInterval) * inv->getReachableThreshold();
+            root["exp_aft"] = Hoymiles.getNumInverters() * Configuration.get().Mqtt_PublishInterval * 3;
         }
         if (devCls != 0) {
             root["dev_cla"] = devCls;

src/MqttHandleInverter.cpp

@@ -14,8 +14,6 @@
 #define TOPIC_SUB_POWER "power"
 #define TOPIC_SUB_RESTART "restart"
 
-#define PUBLISH_MAX_INTERVAL 60000
-
 MqttHandleInverterClass MqttHandleInverter;
 
 void MqttHandleInverterClass::init()
@@ -94,13 +92,9 @@ void MqttHandleInverterClass::loop()
             }
 
             uint32_t lastUpdate = inv->Statistics()->getLastUpdate();
-            if (lastUpdate > 0 && (lastUpdate != _lastPublishStats[i] || ((inv->getZeroValuesIfUnreachable() || inv->getZeroYieldDayOnMidnight()) && _statsTimeout.occured()))) {
+            if (lastUpdate > 0 && lastUpdate != _lastPublishStats[i]) {
                 _lastPublishStats[i] = lastUpdate;
 
-                // At first a change of the stats have to occour. Then the stats
-                // are published on every change or every 60 seconds
-                _statsTimeout.set(PUBLISH_MAX_INTERVAL);
-
                 // Loop all channels
                 for (auto& t : inv->Statistics()->getChannelTypes()) {
                     for (auto& c : inv->Statistics()->getChannelsByType(t)) {

src/MqttSettings.cpp

@@ -130,7 +130,6 @@ void MqttSettingsClass::performConnect()
             }
             static_cast<espMqttClientSecure*>(mqttClient)->setWill(willTopic.c_str(), 2, config.Mqtt_Retain, config.Mqtt_LwtValue_Offline);
             static_cast<espMqttClientSecure*>(mqttClient)->setClientId(clientId.c_str());
-            static_cast<espMqttClientSecure*>(mqttClient)->setCleanSession(config.Mqtt_CleanSession);
             static_cast<espMqttClientSecure*>(mqttClient)->onConnect(std::bind(&MqttSettingsClass::onMqttConnect, this, _1));
             static_cast<espMqttClientSecure*>(mqttClient)->onDisconnect(std::bind(&MqttSettingsClass::onMqttDisconnect, this, _1));
             static_cast<espMqttClientSecure*>(mqttClient)->onMessage(std::bind(&MqttSettingsClass::onMqttMessage, this, _1, _2, _3, _4, _5, _6));
@@ -139,7 +138,6 @@ void MqttSettingsClass::performConnect()
             static_cast<espMqttClient*>(mqttClient)->setCredentials(config.Mqtt_Username, config.Mqtt_Password);
             static_cast<espMqttClient*>(mqttClient)->setWill(willTopic.c_str(), 2, config.Mqtt_Retain, config.Mqtt_LwtValue_Offline);
             static_cast<espMqttClient*>(mqttClient)->setClientId(clientId.c_str());
-            static_cast<espMqttClient*>(mqttClient)->setCleanSession(config.Mqtt_CleanSession);
             static_cast<espMqttClient*>(mqttClient)->onConnect(std::bind(&MqttSettingsClass::onMqttConnect, this, _1));
             static_cast<espMqttClient*>(mqttClient)->onDisconnect(std::bind(&MqttSettingsClass::onMqttDisconnect, this, _1));
             static_cast<espMqttClient*>(mqttClient)->onMessage(std::bind(&MqttSettingsClass::onMqttMessage, this, _1, _2, _3, _4, _5, _6));

src/NtpSettings.cpp

@@ -1,10 +1,9 @@
 // SPDX-License-Identifier: GPL-2.0-or-later
 /*
- * Copyright (C) 2022 - 2023 Thomas Basler and others
+ * Copyright (C) 2022 Thomas Basler and others
  */
 #include "NtpSettings.h"
 #include "Configuration.h"
-#include <Arduino.h>
 #include <time.h>
 
 NtpSettingsClass::NtpSettingsClass()

src/SunPosition.cpp

@@ -5,7 +5,6 @@
 #include "SunPosition.h"
 #include "Configuration.h"
 #include "Utils.h"
-#include <Arduino.h>
 
 SunPositionClass SunPosition;
 
@@ -84,7 +83,7 @@ void SunPositionClass::updateSunData()
 
     _sunriseMinutes = static_cast<int>(sunriseRaw);
     _sunsetMinutes = static_cast<int>(sunsetRaw);
-    uint32_t minutesPastMidnight = timeinfo.tm_hour * 60 + timeinfo.tm_min;
+    uint minutesPastMidnight = timeinfo.tm_hour * 60 + timeinfo.tm_min;
 
     _isDayPeriod = (minutesPastMidnight >= _sunriseMinutes) && (minutesPastMidnight < _sunsetMinutes);
     _isSunsetAvailable = true;

src/Utils.cpp

@@ -10,7 +10,7 @@
 uint32_t Utils::getChipId()
 {
     uint32_t chipId = 0;
-    for (uint8_t i = 0; i < 17; i += 8) {
+    for (int i = 0; i < 17; i += 8) {
         chipId |= ((ESP.getEfuseMac() >> (40 - i)) & 0xff) << i;
     }
     return chipId;

src/WebApi.cpp

@@ -24,7 +24,6 @@ void WebApiClass::init()
     _webApiDtu.init(&_server);
     _webApiEventlog.init(&_server);
     _webApiFirmware.init(&_server);
-    _webApiGridprofile.init(&_server);
     _webApiInverter.init(&_server);
     _webApiLimit.init(&_server);
     _webApiMaintenance.init(&_server);
@@ -58,7 +57,6 @@ void WebApiClass::loop()
     _webApiDtu.loop();
     _webApiEventlog.loop();
     _webApiFirmware.loop();
-    _webApiGridprofile.loop();
     _webApiInverter.loop();
     _webApiLimit.loop();
     _webApiMaintenance.loop();

src/WebApi_gridprofile.cpp

@@ -1,49 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2022 Thomas Basler and others
- */
-#include "WebApi_gridprofile.h"
-#include "WebApi.h"
-#include <AsyncJson.h>
-#include <Hoymiles.h>
-
-void WebApiGridProfileClass::init(AsyncWebServer* server)
-{
-    using std::placeholders::_1;
-
-    _server = server;
-
-    _server->on("/api/gridprofile/status", HTTP_GET, std::bind(&WebApiGridProfileClass::onGridProfileStatus, this, _1));
-}
-
-void WebApiGridProfileClass::loop()
-{
-}
-
-void WebApiGridProfileClass::onGridProfileStatus(AsyncWebServerRequest* request)
-{
-    if (!WebApi.checkCredentialsReadonly(request)) {
-        return;
-    }
-
-    AsyncJsonResponse* response = new AsyncJsonResponse(false, 4096);
-    JsonObject root = response->getRoot();
-
-    uint64_t serial = 0;
-    if (request->hasParam("inv")) {
-        String s = request->getParam("inv")->value();
-        serial = strtoll(s.c_str(), NULL, 16);
-    }
-
-    auto inv = Hoymiles.getInverterBySerial(serial);
-
-    if (inv != nullptr) {
-        auto raw = root.createNestedArray("raw");
-        auto data = inv->GridProfile()->getRawData();
-
-        copyArray(&data[0], data.size(), raw);
-    }
-
-    response->setLength();
-    request->send(response);
-}

src/WebApi_inverter.cpp

@@ -7,7 +7,6 @@
 #include "MqttHandleHass.h"
 #include "WebApi.h"
 #include "WebApi_errors.h"
-#include "defaults.h"
 #include "helper.h"
 #include <AsyncJson.h>
 #include <Hoymiles.h>
@@ -58,9 +57,6 @@ void WebApiInverterClass::onInverterList(AsyncWebServerRequest* request)
             obj["poll_enable_night"] = config.Inverter[i].Poll_Enable_Night;
             obj["command_enable"] = config.Inverter[i].Command_Enable;
             obj["command_enable_night"] = config.Inverter[i].Command_Enable_Night;
-            obj["reachable_threshold"] = config.Inverter[i].ReachableThreshold;
-            obj["zero_runtime"] = config.Inverter[i].ZeroRuntimeDataIfUnrechable;
-            obj["zero_day"] = config.Inverter[i].ZeroYieldDayOnMidnight;
 
             auto inv = Hoymiles.getInverterBySerial(config.Inverter[i].Serial);
             uint8_t max_channels;
@@ -285,9 +281,6 @@ void WebApiInverterClass::onInverterEdit(AsyncWebServerRequest* request)
         inverter.Poll_Enable_Night = root["poll_enable_night"] | true;
         inverter.Command_Enable = root["command_enable"] | true;
         inverter.Command_Enable_Night = root["command_enable_night"] | true;
-        inverter.ReachableThreshold = root["reachable_threshold"] | REACHABLE_THRESHOLD;
-        inverter.ZeroRuntimeDataIfUnrechable = root["zero_runtime"] | false;
-        inverter.ZeroYieldDayOnMidnight = root["zero_day"] | false;
 
         arrayCount++;
     }
@@ -318,9 +311,6 @@ void WebApiInverterClass::onInverterEdit(AsyncWebServerRequest* request)
     if (inv != nullptr) {
         inv->setEnablePolling(inverter.Poll_Enable);
         inv->setEnableCommands(inverter.Command_Enable);
-        inv->setReachableThreshold(inverter.ReachableThreshold);
-        inv->setZeroValuesIfUnreachable(inverter.ZeroRuntimeDataIfUnrechable);
-        inv->setZeroYieldDayOnMidnight(inverter.ZeroYieldDayOnMidnight);
         for (uint8_t c = 0; c < INV_MAX_CHAN_COUNT; c++) {
             inv->Statistics()->setStringMaxPower(c, inverter.channel[c].MaxChannelPower);
             inv->Statistics()->setChannelFieldOffset(TYPE_DC, static_cast<ChannelNum_t>(c), FLD_YT, inverter.channel[c].YieldTotalOffset);

src/WebApi_mqtt.cpp

@@ -54,7 +54,6 @@ void WebApiMqttClass::onMqttStatus(AsyncWebServerRequest* request)
     root["mqtt_client_cert_info"] = getTlsCertInfo(config.Mqtt_ClientCert);
     root["mqtt_lwt_topic"] = String(config.Mqtt_Topic) + config.Mqtt_LwtTopic;
     root["mqtt_publish_interval"] = config.Mqtt_PublishInterval;
-    root["mqtt_clean_session"] = config.Mqtt_CleanSession;
     root["mqtt_hass_enabled"] = config.Mqtt_Hass_Enabled;
     root["mqtt_hass_expire"] = config.Mqtt_Hass_Expire;
     root["mqtt_hass_retain"] = config.Mqtt_Hass_Retain;
@@ -92,7 +91,6 @@ void WebApiMqttClass::onMqttAdminGet(AsyncWebServerRequest* request)
     root["mqtt_lwt_online"] = config.Mqtt_LwtValue_Online;
     root["mqtt_lwt_offline"] = config.Mqtt_LwtValue_Offline;
     root["mqtt_publish_interval"] = config.Mqtt_PublishInterval;
-    root["mqtt_clean_session"] = config.Mqtt_CleanSession;
     root["mqtt_hass_enabled"] = config.Mqtt_Hass_Enabled;
     root["mqtt_hass_expire"] = config.Mqtt_Hass_Expire;
     root["mqtt_hass_retain"] = config.Mqtt_Hass_Retain;
@@ -158,7 +156,6 @@ void WebApiMqttClass::onMqttAdminPost(AsyncWebServerRequest* request)
             && root.containsKey("mqtt_lwt_online")
             && root.containsKey("mqtt_lwt_offline")
             && root.containsKey("mqtt_publish_interval")
-            && root.containsKey("mqtt_clean_session")
             && root.containsKey("mqtt_hass_enabled")
             && root.containsKey("mqtt_hass_expire")
             && root.containsKey("mqtt_hass_retain")
@@ -324,7 +321,6 @@ void WebApiMqttClass::onMqttAdminPost(AsyncWebServerRequest* request)
     strlcpy(config.Mqtt_LwtValue_Online, root["mqtt_lwt_online"].as<String>().c_str(), sizeof(config.Mqtt_LwtValue_Online));
     strlcpy(config.Mqtt_LwtValue_Offline, root["mqtt_lwt_offline"].as<String>().c_str(), sizeof(config.Mqtt_LwtValue_Offline));
     config.Mqtt_PublishInterval = root["mqtt_publish_interval"].as<uint32_t>();
-    config.Mqtt_CleanSession = root["mqtt_clean_session"].as<bool>();
     config.Mqtt_Hass_Enabled = root["mqtt_hass_enabled"].as<bool>();
     config.Mqtt_Hass_Expire = root["mqtt_hass_expire"].as<bool>();
     config.Mqtt_Hass_Retain = root["mqtt_hass_retain"].as<bool>();

src/WebApi_ws_live.cpp

@@ -66,11 +66,6 @@ void WebApiWsLiveClass::loop()
     if (millis() - _lastWsPublish > (10 * 1000) || (maxTimeStamp != _newestInverterTimestamp)) {
 
         try {
-            std::lock_guard<std::mutex> lock(_mutex);
-            DynamicJsonDocument root(4096 * INV_MAX_COUNT);
-            JsonVariant var = root;
-            generateJsonResponse(var);
-
             String buffer;
             // free JsonDocument as soon as possible
             {
@@ -157,7 +152,6 @@ void WebApiWsLiveClass::generateJsonResponse(JsonVariant& root)
                 addField(chanTypeObj, i, inv, t, c, FLD_EFF);
                 if (t == TYPE_DC && inv->Statistics()->getStringMaxPower(c) > 0) {
                     addField(chanTypeObj, i, inv, t, c, FLD_IRR);
-                    chanTypeObj[String(c)][inv->Statistics()->getChannelFieldName(t, c, FLD_IRR)]["max"] = inv->Statistics()->getStringMaxPower(c);
                 }
             }
         }
@@ -237,9 +231,13 @@ void WebApiWsLiveClass::addTotalField(JsonObject& root, String name, float value
 void WebApiWsLiveClass::onWebsocketEvent(AsyncWebSocket* server, AsyncWebSocketClient* client, AwsEventType type, void* arg, uint8_t* data, size_t len)
 {
     if (type == WS_EVT_CONNECT) {
-        MessageOutput.printf("Websocket: [%s][%u] connect\r\n", server->url(), client->id());
+        char str[64];
+        snprintf(str, sizeof(str), "Websocket: [%s][%u] connect", server->url(), client->id());
+        MessageOutput.println(str);
     } else if (type == WS_EVT_DISCONNECT) {
-        MessageOutput.printf("Websocket: [%s][%u] disconnect\r\n", server->url(), client->id());
+        char str[64];
+        snprintf(str, sizeof(str), "Websocket: [%s][%u] disconnect", server->url(), client->id());
+        MessageOutput.println(str);
     }
 }
 
@@ -250,8 +248,7 @@ void WebApiWsLiveClass::onLivedataStatus(AsyncWebServerRequest* request)
     }
 
     try {
-        std::lock_guard<std::mutex> lock(_mutex);
+        AsyncJsonResponse* response = new AsyncJsonResponse(false, 40960U);
-        AsyncJsonResponse* response = new AsyncJsonResponse(false, 4096 * INV_MAX_COUNT);
         JsonVariant root = response->getRoot();
 
         generateJsonResponse(root);

webapp/package.json

@@ -18,29 +18,29 @@
     "sortablejs": "^1.15.0",
     "spark-md5": "^3.0.2",
     "vue": "^3.3.4",
-    "vue-i18n": "^9.3.0",
+    "vue-i18n": "^9.2.2",
     "vue-router": "^4.2.4"
   },
   "devDependencies": {
-    "@intlify/unplugin-vue-i18n": "^1.2.0",
+    "@intlify/unplugin-vue-i18n": "^0.12.3",
     "@rushstack/eslint-patch": "^1.3.3",
     "@tsconfig/node18": "^18.2.1",
     "@types/bootstrap": "^5.2.6",
-    "@types/node": "^20.5.9",
+    "@types/node": "^20.5.7",
     "@types/sortablejs": "^1.15.2",
     "@types/spark-md5": "^3.0.2",
-    "@vitejs/plugin-vue": "^4.3.4",
+    "@vitejs/plugin-vue": "^4.3.3",
     "@vue/eslint-config-typescript": "^11.0.3",
     "@vue/tsconfig": "^0.4.0",
-    "eslint": "^8.49.0",
+    "eslint": "^8.48.0",
     "eslint-plugin-vue": "^9.17.0",
     "npm-run-all": "^4.1.5",
-    "sass": "^1.66.1",
+    "sass": "^1.64.2",
-    "terser": "^5.19.4",
+    "terser": "^5.19.2",
     "typescript": "^5.2.2",
     "vite": "^4.4.9",
     "vite-plugin-compression": "^0.5.1",
     "vite-plugin-css-injected-by-js": "^3.3.0",
-    "vue-tsc": "^1.8.10"
+    "vue-tsc": "^1.8.8"
   }
 }

webapp/src/components/GridProfile.vue

@@ -1,50 +0,0 @@
-<template>
-    <BootstrapAlert :show="!hasValidData">
-        <h4 class="alert-heading">
-            <BIconInfoSquare class="fs-2" />&nbsp;{{ $t('gridprofile.NoInfo') }}
-        </h4>{{ $t('gridprofile.NoInfoLong') }}
-    </BootstrapAlert>
-
-    <template v-if="hasValidData">
-        <BootstrapAlert :show="true" variant="danger">
-            <h4 class="info-heading">
-                <BIconInfoSquare class="fs-2" />&nbsp;{{ $t('gridprofile.GridprofileSupport') }}
-            </h4><div v-html="$t('gridprofile.GridprofileSupportLong')"></div>
-        </BootstrapAlert>
-        <samp >
-            {{ rawContent() }}
-        </samp>
-    </template>
-
-</template>
-
-<script lang="ts">
-import BootstrapAlert from '@/components/BootstrapAlert.vue';
-import type { GridProfileStatus } from "@/types/GridProfileStatus";
-import { BIconInfoSquare } from 'bootstrap-icons-vue';
-import { defineComponent, type PropType } from 'vue';
-
-export default defineComponent({
-    components: {
-        BootstrapAlert,
-        BIconInfoSquare,
-    },
-    props: {
-        gridProfileList: { type: Object as PropType<GridProfileStatus>, required: true },
-    },
-    computed: {
-        rawContent() {
-            return () => {
-                return this.gridProfileList.raw.map(function (x) {
-                    let y = x.toString(16); // to hex
-                    y = ("00" + y).substr(-2); // zero-pad to 2-digits
-                    return y
-                }).join(' ');
-            }
-        },
-        hasValidData() {
-            return this.gridProfileList.raw.reduce((sum, x) => sum + x, 0) > 0;
-        },
-    },
-});
-</script>

webapp/src/locales/de.json

@@ -134,9 +134,7 @@
         "Failure": "Fehlgeschlagen",
         "Pending": "Ausstehend",
         "Ok": "Ok",
-        "Unknown": "Unbekannt",
+        "Unknown": "Unbekannt"
-        "ShowGridProfile": "Zeige Grid Profil",
-        "GridProfile": "Grid Profil"
     },
     "vedirecthome": {
         "SerialNumber": "Seriennummer: ",
@@ -194,12 +192,6 @@
         "HardwarePartNumber": "Hardware-Teilenummer",
         "HardwareVersion": "Hardware-Version"
     },
-    "gridprofile": {
-        "NoInfo": "@:devinfo.NoInfo",
-        "NoInfoLong": "@:devinfo.NoInfoLong",
-        "GridprofileSupport": "Unterstütze die Entwicklung",
-        "GridprofileSupportLong": "Weitere Informationen sind <a href=\"https://github.com/tbnobody/OpenDTU/wiki/Grid-Profile-Parser\" target=\"_blank\">hier</a> zu finden."
-    },
     "systeminfo": {
         "SystemInfo": "System Informationen",
         "VersionError": "Fehler beim Abrufen von Versionsinformationen",
@@ -316,7 +308,6 @@
         "BaseTopic": "Basis Topic",
         "PublishInterval": "Veröffentlichungsintervall",
         "Seconds": "{sec} Sekunden",
-        "CleanSession": "CleanSession Flag",
         "Retain": "Retain",
         "Tls": "TLS",
         "RootCertifcateInfo": "Root CA-Zertifikat-Informationen",
@@ -483,7 +474,6 @@
         "BaseTopicHint": "Basis-Topic, wird allen veröffentlichten Themen vorangestellt (z.B. inverter/)",
         "PublishInterval": "Veröffentlichungsintervall:",
         "Seconds": "Sekunden",
-        "CleanSession": "CleanSession Flag aktivieren",
         "EnableRetain": "Retain Flag aktivieren",
         "EnableTls": "TLS aktivieren",
         "RootCa": "CA-Root-Zertifikat (Standard Letsencrypt):",
@@ -624,9 +614,6 @@
         "SaveOrder": "Reihenfolge speichern",
         "DeleteInverter": "Wechselrichter löschen",
         "EditInverter": "Wechselrichter bearbeiten",
-        "General": "Allgemein",
-        "String": "String",
-        "Advanced": "Erweitert",
         "InverterSerial": "Wechselrichter Seriennummer:",
         "InverterName": "Wechselrichter Name:",
         "InverterNameHint": "Hier kann ein eigener Namen für den Wechselrichter angeben werden.",
@@ -642,12 +629,6 @@
         "StringYtOffset": "Ertragsversatz String {num}:",
         "StringYtOffsetHint": "Dieser Offset wird beim Auslesen des Gesamtertragswertes des Wechselrichters angewendet. Damit kann der Gesamtertrag des Wechselrichters auf Null gesetzt werden, wenn ein gebrauchter Wechselrichter verwendet wird.",
         "InverterHint": "*) Geben Sie die W<sub>p</sub> des Ports ein, um die Einstrahlung zu errechnen.",
-        "ReachableThreshold": "Erreichbarkeit Schwellenwert:",
-        "ReachableThresholdHint": "Legt fest, wie viele Anfragen fehlschlagen dürfen, bis der Wechselrichter als unerreichbar eingestuft wird.",
-        "ZeroRuntime": "Nulle Laufzeit Daten",
-        "ZeroRuntimeHint": "Nulle Laufzeit Daten (keine Ertragsdaten), wenn der Wechselrichter nicht erreichbar ist.",
-        "ZeroDay": "Nulle Tagesertrag um Mitternacht",
-        "ZeroDayHint": "Das funktioniert nur wenn der Wechselrichter nicht erreichbar ist. Wenn Daten aus dem Wechselrichter gelesen werden, werden deren Werte verwendet. (Ein Reset erfolgt nur beim Neustarten)",
         "Cancel": "@:maintenancereboot.Cancel",
         "Save": "@:dtuadmin.Save",
         "DeleteMsg": "Soll der Wechselrichter \"{name}\" mit der Seriennummer {serial} wirklich gelöscht werden?",

webapp/src/locales/en.json

@@ -134,9 +134,7 @@
         "Failure": "Failure",
         "Pending": "Pending",
         "Ok": "Ok",
-        "Unknown": "Unknown",
+        "Unknown": "Unknown"
-        "ShowGridProfile": "Show Grid Profile",
-        "GridProfile": "Grid Profile"
     },
     "vedirecthome": {
         "SerialNumber": "Serial Number: ",
@@ -194,12 +192,6 @@
         "HardwarePartNumber": "Hardware Part Number",
         "HardwareVersion": "Hardware Version"
     },
-    "gridprofile": {
-        "NoInfo": "@:devinfo.NoInfo",
-        "NoInfoLong": "@:devinfo.NoInfoLong",
-        "GridprofileSupport": "Support the development",
-        "GridprofileSupportLong": "Please see <a href=\"https://github.com/tbnobody/OpenDTU/wiki/Grid-Profile-Parser\" target=\"_blank\">here</a> for further information."
-    },
     "systeminfo": {
         "SystemInfo": "System Info",
         "VersionError": "Error fetching version information",
@@ -318,7 +310,6 @@
         "BaseTopic": "Base Topic",
         "PublishInterval": "Publish Interval",
         "Seconds": "{sec} seconds",
-        "CleanSession": "CleanSession flag",
         "Retain": "Retain",
         "Tls": "TLS",
         "RootCertifcateInfo": "Root CA Certifcate Info",
@@ -485,7 +476,6 @@
         "BaseTopicHint": "Base topic, will be prepend to all published topics (e.g. inverter/)",
         "PublishInterval": "Publish Interval:",
         "Seconds": "seconds",
-        "CleanSession": "Enable CleanSession flag",
         "EnableRetain": "Enable Retain Flag",
         "EnableTls": "Enable TLS",
         "RootCa": "CA-Root-Certificate (default Letsencrypt):",
@@ -633,9 +623,6 @@
         "SaveOrder": "Save order",
         "DeleteInverter": "Delete inverter",
         "EditInverter": "Edit inverter",
-        "General": "General",
-        "String": "String",
-        "Advanced": "Advanced",
         "InverterSerial": "Inverter Serial:",
         "InverterName": "Inverter Name:",
         "InverterNameHint": "Here you can specify a custom name for your inverter.",
@@ -651,12 +638,6 @@
         "StringYtOffset": "Yield total offset string {num}:",
         "StringYtOffsetHint": "This offset is applied the read yield total value from the inverter. This can be used to set the yield total of the inverter to zero if a used inverter is used. But you can still try polling data.",
         "InverterHint": "*) Enter the W<sub>p</sub> of the channel to calculate irradiation.",
-        "ReachableThreshold": "Reachable Threshold:",
-        "ReachableThresholdHint": "Defines how many requests are allowed to fail until the inverter is treated is not reachable.",
-        "ZeroRuntime": "Zero runtime data",
-        "ZeroRuntimeHint": "Zero runtime data (no yield data) if inverter becomes unreachable.",
-        "ZeroDay": "Zero daily yield at midnight",
-        "ZeroDayHint": "This only works if the inverter is unreachable. If data is read from the inverter, it's values will be used. (Reset only occours on power cycle)",
         "Cancel": "@:maintenancereboot.Cancel",
         "Save": "@:dtuadmin.Save",
         "DeleteMsg": "Are you sure you want to delete the inverter \"{name}\" with serial number {serial}?",

webapp/src/locales/fr.json

@@ -134,9 +134,7 @@
         "Failure": "Échec",
         "Pending": "En attente",
         "Ok": "OK",
-        "Unknown": "Inconnu",
+        "Unknown": "Inconnu"
-        "ShowGridProfile": "Show Grid Profile",
-        "GridProfile": "Grid Profile"
     },
     "vedirecthome": {
         "SerialNumber": "Serial Number: ",
@@ -194,12 +192,6 @@
         "HardwarePartNumber": "Numéro d'article matériel",
         "HardwareVersion": "Version du matériel"
     },
-    "gridprofile": {
-        "NoInfo": "@:devinfo.NoInfo",
-        "NoInfoLong": "@:devinfo.NoInfoLong",
-        "GridprofileSupport": "Support the development",
-        "GridprofileSupportLong": "Please see <a href=\"https://github.com/tbnobody/OpenDTU/wiki/Grid-Profile-Parser\" target=\"_blank\">here</a> for further information."
-    },
     "systeminfo": {
         "SystemInfo": "Informations sur le système",
         "VersionError": "Erreur de récupération des informations de version",
@@ -316,7 +308,6 @@
         "BaseTopic": "Sujet de base",
         "PublishInterval": "Intervalle de publication",
         "Seconds": "{sec} secondes",
-        "CleanSession": "CleanSession Flag",
         "Retain": "Conserver",
         "Tls": "TLS",
         "RootCertifcateInfo": "Informations sur le certificat de l'autorité de certification racine",
@@ -483,7 +474,6 @@
         "BaseTopicHint": "Sujet de base, qui sera ajouté en préambule à tous les sujets publiés (par exemple, inverter/).",
         "PublishInterval": "Intervalle de publication",
         "Seconds": "secondes",
-        "CleanSession": "Enable CleanSession flag",
         "EnableRetain": "Activation du maintien",
         "EnableTls": "Activer le TLS",
         "RootCa": "Certificat CA-Root (par défaut Letsencrypt)",
@@ -531,9 +521,6 @@
         "SaveOrder": "Save order",
         "DeleteInverter": "Supprimer l'onduleur",
         "EditInverter": "Modifier l'onduleur",
-        "General": "Général",
-        "String": "Ligne",
-        "Advanced": "Advanced",
         "InverterSerial": "Numéro de série de l'onduleur",
         "InverterName": "Nom de l'onduleur :",
         "InverterNameHint": "Ici, vous pouvez spécifier un nom personnalisé pour votre onduleur.",
@@ -549,12 +536,6 @@
         "StringYtOffset": "Décalage du rendement total de la ligne {num} :",
         "StringYtOffsetHint": "Ce décalage est appliqué à la valeur de rendement total lue sur le variateur. Il peut être utilisé pour mettre le rendement total du variateur à zéro si un variateur usagé est utilisé.",
         "InverterHint": "*) Entrez le W<sub>p</sub> du canal pour calculer l'irradiation.",
-        "ReachableThreshold": "Reachable Threshold:",
-        "ReachableThresholdHint": "Defines how many requests are allowed to fail until the inverter is treated is not reachable.",
-        "ZeroRuntime": "Zero runtime data",
-        "ZeroRuntimeHint": "Zero runtime data (no yield data) if inverter becomes unreachable.",
-        "ZeroDay": "Zero daily yield at midnight",
-        "ZeroDayHint": "This only works if the inverter is unreachable. If data is read from the inverter, it's values will be used. (Reset only occours on power cycle)",
         "Cancel": "@:maintenancereboot.Cancel",
         "Save": "@:dtuadmin.Save",
         "DeleteMsg": "Êtes-vous sûr de vouloir supprimer l'onduleur \"{name}\" avec le numéro de série \"{serial}\" ?",

webapp/src/types/GridProfileStatus.ts

@@ -1,3 +0,0 @@
-export interface GridProfileStatus {
-    raw: Array<number>;
-}

webapp/src/types/LiveDataStatus.ts

@@ -2,7 +2,6 @@ export interface ValueObject {
     v: number; // value
     u: string; // unit
     d: number; // digits
-    max: number;
 }
 
 export interface InverterStatistics {

webapp/src/types/MqttConfig.ts

@@ -7,7 +7,6 @@ export interface MqttConfig {
     mqtt_password: string;
     mqtt_topic: string;
     mqtt_publish_interval: number;
-    mqtt_clean_session: boolean;
     mqtt_retain: boolean;
     mqtt_tls: boolean;
     mqtt_root_ca_cert: string;

webapp/src/types/MqttStatus.ts

@@ -6,7 +6,6 @@ export interface MqttStatus {
     mqtt_username: string;
     mqtt_topic: string;
     mqtt_publish_interval: number;
-    mqtt_clean_session: boolean;
     mqtt_retain: boolean;
     mqtt_tls: boolean;
     mqtt_root_ca_cert_info: string;

webapp/src/views/HomeView.vue

@@ -78,14 +78,6 @@
                                     </button>
                                 </div>
 
-                                <div class="btn-group me-2" role="group">
-                                    <button type="button" class="btn btn-sm btn-info"
-                                        @click="onShowGridProfile(inverter.serial)" v-tooltip :title="$t('home.ShowGridProfile')">
-                                        <BIconOutlet style="font-size:24px;" />
-
-                                    </button>
-                                </div>
-
                                 <div class="btn-group" role="group">
                                     <button v-if="inverter.events >= 0" type="button"
                                         class="btn btn-sm btn-secondary position-relative"
@@ -106,7 +98,7 @@
                                     <template v-for="channel in Object.keys(chanType.obj).sort().reverse().map(x=>+x)" :key="channel">
                                         <template v-if="(chanType.name != 'DC') ||
                                             (chanType.name == 'DC' && getSumIrridiation(inverter) == 0) ||
-                                            (chanType.name == 'DC' && getSumIrridiation(inverter) > 0 && chanType.obj[channel].Irradiation?.max || 0 > 0)
+                                            (chanType.name == 'DC' && getSumIrridiation(inverter) > 0 && chanType.obj[channel].Irradiation?.v || 0 > 0)
                                             ">
                                             <div class="col">
                                                 <InverterChannelInfo :channelData="chanType.obj[channel]"
@@ -178,31 +170,6 @@
         </div>
     </div>
 
-    <div class="modal" id="gridProfileView" tabindex="-1">
-        <div class="modal-dialog modal-lg">
-            <div class="modal-content">
-                <div class="modal-header">
-                    <h5 class="modal-title">{{ $t('home.GridProfile') }}</h5>
-                    <button type="button" class="btn-close" data-bs-dismiss="modal" aria-label="Close"></button>
-                </div>
-                <div class="modal-body">
-                    <div class="text-center" v-if="gridProfileLoading">
-                        <div class="spinner-border" role="status">
-                            <span class="visually-hidden">{{ $t('home.Loading') }}</span>
-                        </div>
-                    </div>
-
-                    <GridProfile v-if="!gridProfileLoading" :gridProfileList="gridProfileList" />
-                </div>
-
-                <div class="modal-footer">
-                    <button type="button" class="btn btn-secondary" @click="onHideGridProfile"
-                        data-bs-dismiss="modal">{{ $t('home.Close') }}</button>
-                </div>
-            </div>
-        </div>
-    </div>
-
     <div class="modal" id="limitSettingView" ref="limitSettingView" tabindex="-1">
         <div class="modal-dialog modal-lg">
             <div class="modal-content">
@@ -357,7 +324,6 @@ import BasePage from '@/components/BasePage.vue';
 import BootstrapAlert from '@/components/BootstrapAlert.vue';
 import DevInfo from '@/components/DevInfo.vue';
 import EventLog from '@/components/EventLog.vue';
-import GridProfile from '@/components/GridProfile.vue';
 import HintView from '@/components/HintView.vue';
 import InverterChannelInfo from "@/components/InverterChannelInfo.vue";
 import InverterTotalInfo from '@/components/InverterTotalInfo.vue';
@@ -366,7 +332,6 @@ import HuaweiView from '@/components/HuaweiView.vue'
 import BatteryView from '@/components/BatteryView.vue'
 import type { DevInfoStatus } from '@/types/DevInfoStatus';
 import type { EventlogItems } from '@/types/EventlogStatus';
-import type { GridProfileStatus } from '@/types/GridProfileStatus';
 import type { LimitConfig } from '@/types/LimitConfig';
 import type { LimitStatus } from '@/types/LimitStatus';
 import type { Inverter, LiveData } from '@/types/LiveDataStatus';
@@ -378,7 +343,6 @@ import {
     BIconCpu,
     BIconExclamationCircleFill,
     BIconJournalText,
-    BIconOutlet,
     BIconPower,
     BIconSpeedometer,
     BIconToggleOff,
@@ -393,7 +357,6 @@ export default defineComponent({
         BootstrapAlert,
         DevInfo,
         EventLog,
-        GridProfile,
         HintView,
         InverterChannelInfo,
         InverterTotalInfo,
@@ -402,7 +365,6 @@ export default defineComponent({
         BIconCpu,
         BIconExclamationCircleFill,
         BIconJournalText,
-        BIconOutlet,
         BIconPower,
         BIconSpeedometer,
         BIconToggleOff,
@@ -428,9 +390,6 @@ export default defineComponent({
             devInfoView: {} as bootstrap.Modal,
             devInfoList: {} as DevInfoStatus,
             devInfoLoading: true,
-            gridProfileView: {} as bootstrap.Modal,
-            gridProfileList: {} as GridProfileStatus,
-            gridProfileLoading: true,
 
             limitSettingView: {} as bootstrap.Modal,
             limitSettingLoading: true,
@@ -471,7 +430,6 @@ export default defineComponent({
     mounted() {
         this.eventLogView = new bootstrap.Modal('#eventView');
         this.devInfoView = new bootstrap.Modal('#devInfoView');
-        this.gridProfileView = new bootstrap.Modal('#gridProfileView');
         this.limitSettingView = new bootstrap.Modal('#limitSettingView');
         this.powerSettingView = new bootstrap.Modal('#powerSettingView');
 
@@ -536,15 +494,9 @@ export default defineComponent({
 
             this.socket.onmessage = (event) => {
                 console.log(event);
-                if (event.data != "{}") {
+                this.liveData = JSON.parse(event.data);
-                    this.liveData = JSON.parse(event.data);
+                this.dataLoading = false;
-                    this.dataLoading = false;
+                this.heartCheck(); // Reset heartbeat detection
-                    this.heartCheck(); // Reset heartbeat detection
-                } else {
-                    // Sometimes it does not recover automatically so have to force a reconnect
-                    this.closeSocket();
-                    this.heartCheck(10); // Reconnect faster
-                }
             };
 
             this.socket.onopen = function (event) {
@@ -567,7 +519,7 @@ export default defineComponent({
             }, 1000);
         },
         // Send heartbeat packets regularly * 59s Send a heartbeat
-        heartCheck(duration: number = 59) {
+        heartCheck() {
             this.heartInterval && clearTimeout(this.heartInterval);
             this.heartInterval = setInterval(() => {
                 if (this.socket.readyState === 1) {
@@ -576,7 +528,7 @@ export default defineComponent({
                 } else {
                     this.initSocket(); // Breakpoint reconnection 5 Time
                 }
-            }, duration * 1000);
+            }, 59 * 1000);
         },
         /** To break off websocket Connect */
         closeSocket() {
@@ -613,20 +565,6 @@ export default defineComponent({
 
             this.devInfoView.show();
         },
-        onHideGridProfile() {
-            this.devInfoView.hide();
-        },
-        onShowGridProfile(serial: number) {
-            this.gridProfileLoading = true;
-            fetch("/api/gridprofile/status?inv=" + serial, { headers: authHeader() })
-                .then((response) => handleResponse(response, this.$emitter, this.$router))
-                .then((data) => {
-                    this.gridProfileList = data;
-                    this.gridProfileLoading = false;
-                });
-
-            this.gridProfileView.show();
-        },
         onHideLimitSettings() {
             this.showAlertLimit = false;
         },
@@ -751,7 +689,7 @@ export default defineComponent({
         getSumIrridiation(inv: Inverter): number {
             let total = 0;
             Object.keys(inv.DC).forEach((key) => {
-                total += inv.DC[key as unknown as number].Irradiation?.max || 0;
+                total += inv.DC[key as unknown as number].Irradiation?.v || 0;
             });
             return total;
         }

webapp/src/views/InverterAdminView.vue

@@ -80,119 +80,84 @@
                 </div>
                 <div class="modal-body">
                     <form>
-                        <nav>
+                        <div class="mb-3">
-                            <div class="nav nav-tabs" id="nav-tab" role="tablist">
+                            <label for="inverter-serial" class="col-form-label">
-                                <button class="nav-link active" id="nav-general-tab" data-bs-toggle="tab" data-bs-target="#nav-general"
+                                {{ $t('inverteradmin.InverterSerial') }}
-                                    type="button" role="tab" aria-controls="nav-general" aria-selected="true">{{
+                            </label>
-                                        $t('inverteradmin.General')
+                            <input v-model="selectedInverterData.serial" type="number" id="inverter-serial"
-                                    }}</button>
+                                class="form-control" />
-                                <button class="nav-link" id="nav-string-tab" data-bs-toggle="tab" data-bs-target="#nav-string"
+                            <label for="inverter-name" class="col-form-label">{{ $t('inverteradmin.InverterName') }}
-                                    type="button" role="tab" aria-controls="nav-string">{{ $t('inverteradmin.String') }}</button>
+                                <BIconInfoCircle v-tooltip :title="$t('inverteradmin.InverterNameHint')" />
-                                <button class="nav-link" id="nav-advanced-tab" data-bs-toggle="tab" data-bs-target="#nav-advanced"
+                            </label>
-                                    type="button" role="tab" aria-controls="nav-advanced">{{ $t('inverteradmin.Advanced') }}</button>
+                            <input v-model="selectedInverterData.name" type="text" id="inverter-name"
-                            </div>
+                                class="form-control" maxlength="31" />
-                        </nav>
-                        <div class="tab-content" id="nav-tabContent">
-                            <div class="tab-pane fade show active" id="nav-general" role="tabpanel" aria-labelledby="nav-general-tab" tabindex="0">
-                                <div class="mb-3">
-                                    <label for="inverter-serial" class="col-form-label">
-                                        {{ $t('inverteradmin.InverterSerial') }}
-                                    </label>
-                                    <input v-model="selectedInverterData.serial" type="number" id="inverter-serial"
-                                        class="form-control" />
-                                    <label for="inverter-name" class="col-form-label">{{ $t('inverteradmin.InverterName') }}
-                                        <BIconInfoCircle v-tooltip :title="$t('inverteradmin.InverterNameHint')" />
-                                    </label>
-                                    <input v-model="selectedInverterData.name" type="text" id="inverter-name"
-                                        class="form-control" maxlength="31" />
 
-                                    <CardElement :text="$t('inverteradmin.InverterStatus')" addSpace>
+                            <CardElement :text="$t('inverteradmin.InverterStatus')" addSpace>
-                                        <InputElement :label="$t('inverteradmin.PollEnable')"
+                                <InputElement :label="$t('inverteradmin.PollEnable')"
-                                            v-model="selectedInverterData.poll_enable"
+                                    v-model="selectedInverterData.poll_enable"
-                                            type="checkbox" wide />
+                                    type="checkbox" wide />
-                                        <InputElement :label="$t('inverteradmin.PollEnableNight')"
+                                <InputElement :label="$t('inverteradmin.PollEnableNight')"
-                                            v-model="selectedInverterData.poll_enable_night"
+                                    v-model="selectedInverterData.poll_enable_night"
-                                            type="checkbox" wide/>
+                                    type="checkbox" wide/>
-                                        <InputElement :label="$t('inverteradmin.CommandEnable')"
+                                <InputElement :label="$t('inverteradmin.CommandEnable')"
-                                            v-model="selectedInverterData.command_enable"
+                                    v-model="selectedInverterData.command_enable"
-                                            type="checkbox" wide/>
+                                    type="checkbox" wide/>
-                                        <InputElement :label="$t('inverteradmin.CommandEnableNight')"
+                                <InputElement :label="$t('inverteradmin.CommandEnableNight')"
-                                            v-model="selectedInverterData.command_enable_night"
+                                    v-model="selectedInverterData.command_enable_night"
-                                            type="checkbox" wide/>
+                                    type="checkbox" wide/>
-                                        <div class="alert alert-secondary mt-3" role="alert" v-html="$t('inverteradmin.StatusHint')"></div>
+                                <div class="alert alert-secondary mt-3" role="alert" v-html="$t('inverteradmin.StatusHint')"></div>
-                                    </CardElement>
+                            </CardElement>
-                                </div>
+                        </div>
-                            </div>
 
-                            <div class="tab-pane fade show" id="nav-string" role="tabpanel" aria-labelledby="nav-string-tab" tabindex="0">
+                        <div v-for="(ch, index) in selectedInverterData.channel" :key="`${index}`">
-                                <div v-for="(ch, index) in selectedInverterData.channel" :key="`${index}`">
+                            <div class="row g-2">
-                                    <div class="row g-2">
+                                <div class="col-md">
-                                        <div class="col-md">
+                                    <label :for="`inverter-name_${index}`" class="col-form-label">
-                                            <label :for="`inverter-name_${index}`" class="col-form-label">
+                                        {{ $t('inverteradmin.StringName', { num: index + 1 }) }}
-                                                {{ $t('inverteradmin.StringName', { num: index + 1 }) }}
+                                        <BIconInfoCircle v-tooltip :title="$t('inverteradmin.StringNameHint')" />
-                                                <BIconInfoCircle v-tooltip :title="$t('inverteradmin.StringNameHint')" />
+                                    </label>
-                                            </label>
+                                    <div class="d-flex mb-2">
-                                            <div class="d-flex mb-2">
+                                        <div class="input-group">
-                                                <div class="input-group">
+                                            <input type="text" class="form-control" :id="`inverter-name_${index}`"
-                                                    <input type="text" class="form-control" :id="`inverter-name_${index}`"
+                                                maxlength="31" v-model="ch.name" />
-                                                        maxlength="31" v-model="ch.name" />
-                                                </div>
-                                            </div>
-                                        </div>
-                                    </div>
-                                    <div class="row g-2">
-                                        <div class="col">
-                                            <label :for="`inverter-max_${index}`" class="col-form-label">
-                                                {{ $t('inverteradmin.StringMaxPower', { num: index + 1 }) }}
-                                                <BIconInfoCircle v-tooltip :title="$t('inverteradmin.StringMaxPowerHint')" />
-                                            </label>
-                                            <div class="d-flex mb-2">
-                                                <div class="input-group">
-                                                    <input type="number" class="form-control" :id="`inverter-max_${index}`"
-                                                        min="0" v-model="ch.max_power"
-                                                        :aria-describedby="`inverter-maxDescription_${index} inverter-customizer`" />
-                                                    <span class="input-group-text"
-                                                        :id="`inverter-maxDescription_${index}`">W<sub>p</sub><sup>*</sup></span>
-                                                </div>
-                                            </div>
-                                        </div>
-                                        <div class="col">
-                                            <label :for="`inverter-ytoffset_${index}`" class="col-form-label">
-                                                {{ $t('inverteradmin.StringYtOffset', { num: index + 1 }) }}
-                                                <BIconInfoCircle v-tooltip :title="$t('inverteradmin.StringYtOffsetHint')" />
-                                            </label>
-                                            <div class="d-flex mb-2">
-                                                <div class="input-group">
-                                                    <input type="number" class="form-control" :id="`inverter-ytoffset_${index}`"
-                                                        min="0" v-model="ch.yield_total_offset"
-                                                        :aria-describedby="`inverter-ytoffsetDescription_${index} inverter-customizer`" />
-                                                    <span class="input-group-text"
-                                                        :id="`inverter-ytoffsetDescription_${index}`">kWh</span>
-                                                </div>
-                                            </div>
                                         </div>
                                     </div>
                                 </div>
-                                <div :id="`inverter-customizer`" class="form-text" v-html="$t('inverteradmin.InverterHint')">
+                            </div>
+                            <div class="row g-2">
+                                <div class="col">
+                                    <label :for="`inverter-max_${index}`" class="col-form-label">
+                                        {{ $t('inverteradmin.StringMaxPower', { num: index + 1 }) }}
+                                        <BIconInfoCircle v-tooltip :title="$t('inverteradmin.StringMaxPowerHint')" />
+                                    </label>
+                                    <div class="d-flex mb-2">
+                                        <div class="input-group">
+                                            <input type="number" class="form-control" :id="`inverter-max_${index}`"
+                                                min="0" v-model="ch.max_power"
+                                                :aria-describedby="`inverter-maxDescription_${index} inverter-customizer`" />
+                                            <span class="input-group-text"
+                                                :id="`inverter-maxDescription_${index}`">W<sub>p</sub><sup>*</sup></span>
+                                        </div>
+                                    </div>
+                                </div>
+                                <div class="col">
+                                    <label :for="`inverter-ytoffset_${index}`" class="col-form-label">
+                                        {{ $t('inverteradmin.StringYtOffset', { num: index + 1 }) }}
+                                        <BIconInfoCircle v-tooltip :title="$t('inverteradmin.StringYtOffsetHint')" />
+                                    </label>
+                                    <div class="d-flex mb-2">
+                                        <div class="input-group">
+                                            <input type="number" class="form-control" :id="`inverter-ytoffset_${index}`"
+                                                min="0" v-model="ch.yield_total_offset"
+                                                :aria-describedby="`inverter-ytoffsetDescription_${index} inverter-customizer`" />
+                                            <span class="input-group-text"
+                                                :id="`inverter-ytoffsetDescription_${index}`">kWh</span>
+                                        </div>
+                                    </div>
                                 </div>
                             </div>
-
+                        </div>
-                            <div class="tab-pane fade show" id="nav-advanced" role="tabpanel" aria-labelledby="nav-advanced-tab" tabindex="0">
+                        <div :id="`inverter-customizer`" class="form-text" v-html="$t('inverteradmin.InverterHint')">
-                                <InputElement :label="$t('inverteradmin.ReachableThreshold')"
-                                    v-model="selectedInverterData.reachable_threshold"
-                                    type="number" min="1" max="100"
-                                    :tooltip="$t('inverteradmin.ReachableThresholdHint')" wide />
-
-                                <InputElement :label="$t('inverteradmin.ZeroRuntime')"
-                                    v-model="selectedInverterData.zero_runtime"
-                                    type="checkbox"
-                                    :tooltip="$t('inverteradmin.ZeroRuntimeHint')" wide/>
-
-                                <InputElement :label="$t('inverteradmin.ZeroDay')"
-                                    v-model="selectedInverterData.zero_day"
-                                    type="checkbox"
-                                    :tooltip="$t('inverteradmin.ZeroDayHint')" wide/>
-                            </div>
                         </div>
                     </form>
 
@@ -266,9 +231,6 @@ declare interface Inverter {
     poll_enable_night: boolean;
     command_enable: boolean;
     command_enable_night: boolean;
-    reachable_threshold: number;
-    zero_runtime: boolean;
-    zero_day: boolean;
     channel: Array<Channel>;
 }
 

webapp/src/views/MqttAdminView.vue

@@ -53,10 +53,6 @@
                               type="number" min="5" max="86400"
                               :postfix="$t('mqttadmin.Seconds')"/>
 
-                <InputElement :label="$t('mqttadmin.CleanSession')"
-                              v-model="mqttConfigList.mqtt_clean_session"
-                              type="checkbox"/>
-
                 <InputElement :label="$t('mqttadmin.EnableRetain')"
                               v-model="mqttConfigList.mqtt_retain"
                               type="checkbox"/>

webapp/src/views/MqttInfoView.vue

@@ -36,12 +36,6 @@
                             <th>{{ $t('mqttinfo.PublishInterval') }}</th>
                             <td>{{ $t('mqttinfo.Seconds', { sec: mqttDataList.mqtt_publish_interval }) }}</td>
                         </tr>
-                        <tr>
-                            <th>{{ $t('mqttinfo.CleanSession') }}</th>
-                            <td>
-                                <StatusBadge :status="mqttDataList.mqtt_clean_session" true_text="mqttinfo.Enabled" false_text="mqttinfo.Disabled" />
-                            </td>
-                        </tr>
                         <tr>
                             <th>{{ $t('mqttinfo.Retain') }}</th>
                             <td>

webapp/yarn.lock

@@ -166,15 +166,15 @@
     minimatch "^3.1.2"
     strip-json-comments "^3.1.1"
 
-"@eslint/js@8.49.0":
+"@eslint/js@8.48.0":
-  version "8.49.0"
+  version "8.48.0"
-  resolved "https://registry.yarnpkg.com/@eslint/js/-/js-8.49.0.tgz#86f79756004a97fa4df866835093f1df3d03c333"
+  resolved "https://registry.yarnpkg.com/@eslint/js/-/js-8.48.0.tgz#642633964e217905436033a2bd08bf322849b7fb"
-  integrity sha512-1S8uAY/MTJqVx0SC4epBq+N2yhuwtNwLbJYNZyhL2pO1ZVKn5HFXav5T41Ryzy9K9V7ZId2JB2oy/W4aCd9/2w==
+  integrity sha512-ZSjtmelB7IJfWD2Fvb7+Z+ChTIKWq6kjda95fLcQKNS5aheVHn4IkfgRQE3sIIzTcSLwLcLZUD9UBt+V7+h+Pw==
 
-"@humanwhocodes/config-array@^0.11.11":
+"@humanwhocodes/config-array@^0.11.10":
-  version "0.11.11"
+  version "0.11.10"
-  resolved "https://registry.yarnpkg.com/@humanwhocodes/config-array/-/config-array-0.11.11.tgz#88a04c570dbbc7dd943e4712429c3df09bc32844"
+  resolved "https://registry.yarnpkg.com/@humanwhocodes/config-array/-/config-array-0.11.10.tgz#5a3ffe32cc9306365fb3fd572596cd602d5e12d2"
-  integrity sha512-N2brEuAadi0CcdeMXUkhbZB84eskAc8MEX1By6qEchoVywSgXPIjou4rYsl0V3Hj0ZnuGycGCjdNgockbzeWNA==
+  integrity sha512-KVVjQmNUepDVGXNuoRRdmmEjruj0KfiGSbS8LVc12LMsWDQzRXJ0qdhN8L8uUigKpfEHRhlaQFY0ib1tnUbNeQ==
   dependencies:
     "@humanwhocodes/object-schema" "^1.2.1"
     debug "^4.1.1"
@@ -190,72 +190,72 @@
   resolved "https://registry.yarnpkg.com/@humanwhocodes/object-schema/-/object-schema-1.2.1.tgz#b520529ec21d8e5945a1851dfd1c32e94e39ff45"
   integrity sha512-ZnQMnLV4e7hDlUvw8H+U8ASL02SS2Gn6+9Ac3wGGLIe7+je2AeAOxPY+izIPJDfFDb7eDjev0Us8MO1iFRN8hA==
 
-"@intlify/bundle-utils@^7.3.0":
+"@intlify/bundle-utils@^7.0.2":
-  version "7.3.0"
+  version "7.0.2"
-  resolved "https://registry.yarnpkg.com/@intlify/bundle-utils/-/bundle-utils-7.3.0.tgz#11048e8aeede313f7492cefcf412359bd31eed76"
+  resolved "https://registry.yarnpkg.com/@intlify/bundle-utils/-/bundle-utils-7.0.2.tgz#2c92a4d815d97a160c2c662a9951a790296e2fd2"
-  integrity sha512-lcnfsLA5Dyd3TbvfoLS0ejLr1vAJYyT6VRYtE4LGNexy1ZD/GEcbXrC33fI9oQp7t2hDlHbCn2o4BBVgXaJFqg==
+  integrity sha512-8wbx9xhbawBFTE5LPTECiK26RRqrNS31jyWSur72ZXZZ4it5jiZTcG6eUJlNirr4+jXYio2DGY299JsGVT4cpw==
   dependencies:
-    "@intlify/message-compiler" "^9.4.0"
+    "@intlify/message-compiler" "9.3.0-beta.24"
-    "@intlify/shared" "^9.4.0"
+    "@intlify/shared" "9.3.0-beta.24"
     acorn "^8.8.2"
     escodegen "^2.0.0"
     estree-walker "^2.0.2"
-    jsonc-eslint-parser "^2.3.0"
+    jsonc-eslint-parser "^1.0.1"
     magic-string "^0.30.0"
     mlly "^1.2.0"
     source-map-js "^1.0.1"
-    yaml-eslint-parser "^1.2.2"
+    yaml-eslint-parser "^0.3.2"
 
-"@intlify/core-base@9.3.0":
+"@intlify/core-base@9.2.2":
-  version "9.3.0"
+  version "9.2.2"
-  resolved "https://registry.yarnpkg.com/@intlify/core-base/-/core-base-9.3.0.tgz#fa42e32f89f06d421772fcedeec7dfba845ba98f"
+  resolved "https://registry.yarnpkg.com/@intlify/core-base/-/core-base-9.2.2.tgz#5353369b05cc9fe35cab95fe20afeb8a4481f939"
-  integrity sha512-SRzn8TMnPZ6MY8OFrgouRq4DGaf01SHcJEF6FglYFYvRkgPzziEcQe+v2PD+O5lUp/rJafP4dabm1CmsVAA7rA==
+  integrity sha512-JjUpQtNfn+joMbrXvpR4hTF8iJQ2sEFzzK3KIESOx+f+uwIjgw20igOyaIdhfsVVBCds8ZM64MoeNSx+PHQMkA==
   dependencies:
-    "@intlify/devtools-if" "9.3.0"
+    "@intlify/devtools-if" "9.2.2"
-    "@intlify/message-compiler" "9.3.0"
+    "@intlify/message-compiler" "9.2.2"
-    "@intlify/shared" "9.3.0"
+    "@intlify/shared" "9.2.2"
-    "@intlify/vue-devtools" "9.3.0"
+    "@intlify/vue-devtools" "9.2.2"
 
-"@intlify/devtools-if@9.3.0":
+"@intlify/devtools-if@9.2.2":
-  version "9.3.0"
+  version "9.2.2"
-  resolved "https://registry.yarnpkg.com/@intlify/devtools-if/-/devtools-if-9.3.0.tgz#ae5a4d3577e05577e65bb6abbb0506d8af9309f6"
+  resolved "https://registry.yarnpkg.com/@intlify/devtools-if/-/devtools-if-9.2.2.tgz#b13d9ac4b4e2fe6d2e7daa556517a8061fe8bd39"
-  integrity sha512-5aKZnqj0Ff4dfwBX2Oo+MheVs00CBnC0RzWK26aT2M4AF0cxdFLOJAs51/eHT01jmzrxSvfBMjdArUWHwgetfg==
+  integrity sha512-4ttr/FNO29w+kBbU7HZ/U0Lzuh2cRDhP8UlWOtV9ERcjHzuyXVZmjyleESK6eVP60tGC9QtQW9yZE+JeRhDHkg==
   dependencies:
-    "@intlify/shared" "9.3.0"
+    "@intlify/shared" "9.2.2"
 
-"@intlify/message-compiler@9.3.0":
+"@intlify/message-compiler@9.2.2":
-  version "9.3.0"
+  version "9.2.2"
-  resolved "https://registry.yarnpkg.com/@intlify/message-compiler/-/message-compiler-9.3.0.tgz#203366fe7448255731e951507c4d79093bf898b1"
+  resolved "https://registry.yarnpkg.com/@intlify/message-compiler/-/message-compiler-9.2.2.tgz#e42ab6939b8ae5b3d21faf6a44045667a18bba1c"
-  integrity sha512-D8tSJEhTCSFcCzkThjE4Sbk1tIdvzkYa1FaVIzUtZ8hKPATvokNrOiDw1i/h671m8A80l9Ywq594i/LPTB6EJA==
+  integrity sha512-IUrQW7byAKN2fMBe8z6sK6riG1pue95e5jfokn8hA5Q3Bqy4MBJ5lJAofUsawQJYHeoPJ7svMDyBaVJ4d0GTtA==
   dependencies:
-    "@intlify/shared" "9.3.0"
+    "@intlify/shared" "9.2.2"
+    source-map "0.6.1"
+
+"@intlify/message-compiler@9.3.0-beta.24":
+  version "9.3.0-beta.24"
+  resolved "https://registry.yarnpkg.com/@intlify/message-compiler/-/message-compiler-9.3.0-beta.24.tgz#0f1e2cbc4ac223be67b61dbaaac0d9eac8b0decb"
+  integrity sha512-prhHATkgp0mpPqoVgiAtLmUc1JMvs8fMH6w53AVEBn+VF87dLhzanfmWY5FoZWORG51ag54gBDBOoM/VFv3m3A==
+  dependencies:
+    "@intlify/shared" "9.3.0-beta.24"
     source-map-js "^1.0.2"
 
-"@intlify/message-compiler@^9.4.0":
+"@intlify/shared@9.2.2":
-  version "9.4.0"
+  version "9.2.2"
-  resolved "https://registry.yarnpkg.com/@intlify/message-compiler/-/message-compiler-9.4.0.tgz#c11fceb4cc07dfe6a4b3066ca6e9a9e44e897f23"
+  resolved "https://registry.yarnpkg.com/@intlify/shared/-/shared-9.2.2.tgz#5011be9ca2b4ab86f8660739286e2707f9abb4a5"
-  integrity sha512-EdjqOH3bQqEjZcUOwo90wuW4ZuFr41FDxVni6WNKS0V0myKgwz9EuvLDcnEbjJMIX8vKAWPjWfnSTt5fMwKHLA==
+  integrity sha512-wRwTpsslgZS5HNyM7uDQYZtxnbI12aGiBZURX3BTR9RFIKKRWpllTsgzHWvj3HKm3Y2Sh5LPC1r0PDCKEhVn9Q==
+
+"@intlify/shared@9.3.0-beta.24":
+  version "9.3.0-beta.24"
+  resolved "https://registry.yarnpkg.com/@intlify/shared/-/shared-9.3.0-beta.24.tgz#23e08af9fc904fe3ef896786f9e659da6bb567b5"
+  integrity sha512-AKxJ8s7eKIQWkNaf4wyyoLRwf4puCuQgjSChlDJm5JBEt6T8HGgnYTJLRXu6LD/JACn3Qwu6hM/XRX1c9yvjmQ==
+
+"@intlify/unplugin-vue-i18n@^0.12.3":
+  version "0.12.3"
+  resolved "https://registry.yarnpkg.com/@intlify/unplugin-vue-i18n/-/unplugin-vue-i18n-0.12.3.tgz#fae7d92d3e7bfe9e710fb332b28d22e0f8d999f2"
+  integrity sha512-0riPtSfTM58JmGNMmJho/aHD2z3K24BESYAmkLvKlo61/LbaPvnjYU1DbSbJEm6bSjE2oEjUj+di3QaYxXei/w==
   dependencies:
-    "@intlify/shared" "9.4.0"
+    "@intlify/bundle-utils" "^7.0.2"
-    source-map-js "^1.0.2"
+    "@intlify/shared" "9.3.0-beta.24"
-
-"@intlify/shared@9.3.0":
-  version "9.3.0"
-  resolved "https://registry.yarnpkg.com/@intlify/shared/-/shared-9.3.0.tgz#8875120f1e6826be0e99b623e2618167402bfe41"
-  integrity sha512-MMGRz6zWxtz7rHtxIIdnyb8SYOIaaseN1IvUhAEs9tOW4u77RD4DFp4qgPXesp2Gxo/5QitH9kwSs0jnxGUNEw==
-
-"@intlify/shared@9.4.0", "@intlify/shared@^9.4.0":
-  version "9.4.0"
-  resolved "https://registry.yarnpkg.com/@intlify/shared/-/shared-9.4.0.tgz#4a78d462fc82433db900981e12eb5b1aae3d6085"
-  integrity sha512-AFqymip2kToqA0B6KZPg5jSrdcVHoli9t/VhGKE2iiMq9utFuMoGdDC/JOCIZgwxo6aXAk86QyU2XtzEoMuZ6A==
-
-"@intlify/unplugin-vue-i18n@^1.2.0":
-  version "1.2.0"
-  resolved "https://registry.yarnpkg.com/@intlify/unplugin-vue-i18n/-/unplugin-vue-i18n-1.2.0.tgz#ca4ac742140f1eaf4668c9530db5db23069eb604"
-  integrity sha512-AzjlMZKj9DG10ICDR2VWjfJudHJ1XK2GNSHxw+VmOUYpUm4S0L/a7OAdvgnuY7S4plk1VnPdT4YilpZk+uQcqg==
-  dependencies:
-    "@intlify/bundle-utils" "^7.3.0"
-    "@intlify/shared" "^9.4.0"
     "@rollup/pluginutils" "^5.0.2"
     "@vue/compiler-sfc" "^3.2.47"
     debug "^4.3.3"
@@ -267,13 +267,13 @@
     source-map-js "^1.0.2"
     unplugin "^1.1.0"
 
-"@intlify/vue-devtools@9.3.0":
+"@intlify/vue-devtools@9.2.2":
-  version "9.3.0"
+  version "9.2.2"
-  resolved "https://registry.yarnpkg.com/@intlify/vue-devtools/-/vue-devtools-9.3.0.tgz#f3137319fadaa92686de11be5ef28209dc828455"
+  resolved "https://registry.yarnpkg.com/@intlify/vue-devtools/-/vue-devtools-9.2.2.tgz#b95701556daf7ebb3a2d45aa3ae9e6415aed8317"
-  integrity sha512-kEaxIz1VEgsz2q5RhoS+fBGTkXr/4+pxmK9mN14+speVGb82HPRntKBmz0GO18I1JisD4Z0vAva+KCTHGeAqbQ==
+  integrity sha512-+dUyqyCHWHb/UcvY1MlIpO87munedm3Gn6E9WWYdWrMuYLcoIoOEVDWSS8xSwtlPU+kA+MEQTP6Q1iI/ocusJg==
   dependencies:
-    "@intlify/core-base" "9.3.0"
+    "@intlify/core-base" "9.2.2"
-    "@intlify/shared" "9.3.0"
+    "@intlify/shared" "9.2.2"
 
 "@jridgewell/gen-mapping@^0.3.0":
   version "0.3.2"
@@ -382,10 +382,10 @@
   resolved "https://registry.yarnpkg.com/@types/json-schema/-/json-schema-7.0.11.tgz#d421b6c527a3037f7c84433fd2c4229e016863d3"
   integrity sha512-wOuvG1SN4Us4rez+tylwwwCV1psiNVOkJeM3AUWUNWg/jDQY2+HE/444y5gc+jBmRqASOm2Oeh5c1axHobwRKQ==
 
-"@types/node@^20.5.9":
+"@types/node@^20.5.7":
-  version "20.5.9"
+  version "20.5.7"
-  resolved "https://registry.yarnpkg.com/@types/node/-/node-20.5.9.tgz#a70ec9d8fa0180a314c3ede0e20ea56ff71aed9a"
+  resolved "https://registry.yarnpkg.com/@types/node/-/node-20.5.7.tgz#4b8ecac87fbefbc92f431d09c30e176fc0a7c377"
-  integrity sha512-PcGNd//40kHAS3sTlzKB9C9XL4K0sTup8nbG5lC14kzEteTNuAFh9u5nA0o5TWnSG2r/JNPRXFVcHJIIeRlmqQ==
+  integrity sha512-dP7f3LdZIysZnmvP3ANJYTSwg+wLLl8p7RqniVlV7j+oXSXAbt9h0WIBFmJy5inWZoX9wZN6eXx+YXd9Rh3RBA==
 
 "@types/semver@^7.3.12":
   version "7.3.13"
@@ -486,10 +486,10 @@
     "@typescript-eslint/types" "5.59.1"
     eslint-visitor-keys "^3.3.0"
 
-"@vitejs/plugin-vue@^4.3.4":
+"@vitejs/plugin-vue@^4.3.3":
-  version "4.3.4"
+  version "4.3.3"
-  resolved "https://registry.yarnpkg.com/@vitejs/plugin-vue/-/plugin-vue-4.3.4.tgz#a289dff38e01949fe7be581d5542cabaeb961dec"
+  resolved "https://registry.yarnpkg.com/@vitejs/plugin-vue/-/plugin-vue-4.3.3.tgz#3b2337f64495f95cfea5b1497d2d3f4a0b3382b2"
-  integrity sha512-ciXNIHKPriERBisHFBvnTbfKa6r9SAesOYXeGDzgegcvy9Q4xdScSHAmKbNT0M3O0S9LKhIf5/G+UYG4NnnzYw==
+  integrity sha512-ssxyhIAZqB0TrpUg6R0cBpCuMk9jTIlO1GNSKKQD6S8VjnXi6JXKfUXjSsxey9IwQiaRGsO1WnW9Rkl1L6AJVw==
 
 "@volar/language-core@1.10.0", "@volar/language-core@~1.10.0":
   version "1.10.0"
@@ -614,6 +614,11 @@
     "@vue/compiler-dom" "3.3.4"
     "@vue/shared" "3.3.4"
 
+"@vue/devtools-api@^6.2.1":
+  version "6.4.5"
+  resolved "https://registry.yarnpkg.com/@vue/devtools-api/-/devtools-api-6.4.5.tgz#d54e844c1adbb1e677c81c665ecef1a2b4bb8380"
+  integrity sha512-JD5fcdIuFxU4fQyXUu3w2KpAJHzTVdN+p4iOX2lMWSHMOoQdMAcpFLZzm9Z/2nmsoZ1a96QEhZ26e50xLBsgOQ==
+
 "@vue/devtools-api@^6.5.0":
   version "6.5.0"
   resolved "https://registry.yarnpkg.com/@vue/devtools-api/-/devtools-api-6.5.0.tgz#98b99425edee70b4c992692628fa1ea2c1e57d07"
@@ -628,10 +633,10 @@
     "@typescript-eslint/parser" "^5.59.1"
     vue-eslint-parser "^9.1.1"
 
-"@vue/language-core@1.8.10":
+"@vue/language-core@1.8.8":
-  version "1.8.10"
+  version "1.8.8"
-  resolved "https://registry.yarnpkg.com/@vue/language-core/-/language-core-1.8.10.tgz#e37409ac8686f30963a00662d51bf6d07c599ca9"
+  resolved "https://registry.yarnpkg.com/@vue/language-core/-/language-core-1.8.8.tgz#5a8aa8363f4dfacdfcd7808a9926744d7c310ae6"
-  integrity sha512-db8PtM4ZZr7SYNH30XpKxUYnUBYaTvcuJ4c2whKK04fuAjbtjAIZ2al5GzGEfUlesmvkpgdbiSviRXUxgD9Omw==
+  integrity sha512-i4KMTuPazf48yMdYoebTkgSOJdFraE4pQf0B+FTOFkbB+6hAfjrSou/UmYWRsWyZV6r4Rc6DDZdI39CJwL0rWw==
   dependencies:
     "@volar/language-core" "~1.10.0"
     "@volar/source-map" "~1.10.0"
@@ -723,23 +728,23 @@
   resolved "https://registry.yarnpkg.com/@vue/tsconfig/-/tsconfig-0.4.0.tgz#f01e2f6089b5098136fb084a0dd0cdd4533b72b0"
   integrity sha512-CPuIReonid9+zOG/CGTT05FXrPYATEqoDGNrEaqS4hwcw5BUNM2FguC0mOwJD4Jr16UpRVl9N0pY3P+srIbqmg==
 
-"@vue/typescript@1.8.10":
+"@vue/typescript@1.8.8":
-  version "1.8.10"
+  version "1.8.8"
-  resolved "https://registry.yarnpkg.com/@vue/typescript/-/typescript-1.8.10.tgz#70e3354e67498ef2270cba38eba092b29da1a494"
+  resolved "https://registry.yarnpkg.com/@vue/typescript/-/typescript-1.8.8.tgz#8efb375d448862134492a044f4e96afada547500"
-  integrity sha512-vPSpTXMk4chYwvyTGjM891cKgnx2r6vtbdANOp2mRU31f4HYGyLrZBlGgiua7SaO2cLjUg8y91OipJe0t8OFhA==
+  integrity sha512-jUnmMB6egu5wl342eaUH236v8tdcEPXXkPgj+eI/F6JwW/lb+yAU6U07ZbQ3MVabZRlupIlPESB7ajgAGixhow==
   dependencies:
     "@volar/typescript" "~1.10.0"
-    "@vue/language-core" "1.8.10"
+    "@vue/language-core" "1.8.8"
 
-acorn-jsx@^5.3.2:
+acorn-jsx@^5.2.0, acorn-jsx@^5.3.2:
   version "5.3.2"
   resolved "https://registry.yarnpkg.com/acorn-jsx/-/acorn-jsx-5.3.2.tgz#7ed5bb55908b3b2f1bc55c6af1653bada7f07937"
   integrity sha512-rq9s+JNhf0IChjtDXxllJ7g41oZk5SlXtp0LHwyA5cejwn7vKmKp4pPri6YEePv2PU65sAsegbXtIinmDFDXgQ==
 
-acorn@^8.5.0, acorn@^8.9.0:
+acorn@^7.1.1, acorn@^7.4.1:
-  version "8.10.0"
+  version "7.4.1"
-  resolved "https://registry.yarnpkg.com/acorn/-/acorn-8.10.0.tgz#8be5b3907a67221a81ab23c7889c4c5526b62ec5"
+  resolved "https://registry.yarnpkg.com/acorn/-/acorn-7.4.1.tgz#feaed255973d2e77555b83dbc08851a6c63520fa"
-  integrity sha512-F0SAmZ8iUtS//m8DmCTA0jlh6TDKkHQyK6xc6V4KDTyZKA9dnvX9/3sRTVQrWm79glUAZbnmmNcdYwUIHWVybw==
+  integrity sha512-nQyp0o1/mNdbTO1PO6kHkwSrmgZ0MT/jCCpNiwbUjGoRN4dlBhqJtoQuCnEOKzgTVwg0ZWiCoQy6SxMebQVh8A==
 
 acorn@^8.8.0:
   version "8.8.0"
@@ -751,6 +756,11 @@ acorn@^8.8.2:
   resolved "https://registry.yarnpkg.com/acorn/-/acorn-8.8.2.tgz#1b2f25db02af965399b9776b0c2c391276d37c4a"
   integrity sha512-xjIYgE8HBrkpd/sJqOGNspf8uHG+NOHGOw6a/Urj8taM2EXfdNAH2oFcPeIFfsv3+kz/mJrS5VuMqbNLjCa2vw==
 
+acorn@^8.9.0:
+  version "8.10.0"
+  resolved "https://registry.yarnpkg.com/acorn/-/acorn-8.10.0.tgz#8be5b3907a67221a81ab23c7889c4c5526b62ec5"
+  integrity sha512-F0SAmZ8iUtS//m8DmCTA0jlh6TDKkHQyK6xc6V4KDTyZKA9dnvX9/3sRTVQrWm79glUAZbnmmNcdYwUIHWVybw==
+
 ajv@^6.12.4:
   version "6.12.6"
   resolved "https://registry.yarnpkg.com/ajv/-/ajv-6.12.6.tgz#baf5a62e802b07d977034586f8c3baf5adf26df4"
@@ -1131,10 +1141,17 @@ eslint-scope@^7.2.2:
     esrecurse "^4.3.0"
     estraverse "^5.2.0"
 
-eslint-visitor-keys@^3.0.0, eslint-visitor-keys@^3.4.3:
+eslint-utils@^2.1.0:
-  version "3.4.3"
+  version "2.1.0"
-  resolved "https://registry.yarnpkg.com/eslint-visitor-keys/-/eslint-visitor-keys-3.4.3.tgz#0cd72fe8550e3c2eae156a96a4dddcd1c8ac5800"
+  resolved "https://registry.yarnpkg.com/eslint-utils/-/eslint-utils-2.1.0.tgz#d2de5e03424e707dc10c74068ddedae708741b27"
-  integrity sha512-wpc+LXeiyiisxPlEkUzU6svyS1frIO3Mgxj1fdy7Pm8Ygzguax2N3Fa/D/ag1WqbOprdI+uY6wMUl8/a2G+iag==
+  integrity sha512-w94dQYoauyvlDc43XnGB8lU3Zt713vNChgt4EWwhXAP2XkBvndfxF0AgIqKOOasjPIPzj9JqgwkwbCYD0/V3Zg==
+  dependencies:
+    eslint-visitor-keys "^1.1.0"
+
+eslint-visitor-keys@^1.1.0, eslint-visitor-keys@^1.3.0:
+  version "1.3.0"
+  resolved "https://registry.yarnpkg.com/eslint-visitor-keys/-/eslint-visitor-keys-1.3.0.tgz#30ebd1ef7c2fdff01c3a4f151044af25fab0523e"
+  integrity sha512-6J72N8UNa462wa/KFODt/PJ3IU60SDpC3QXC1Hjc1BXXpfL2C9R5+AU7jhe0F6GREqVMh4Juu+NY7xn+6dipUQ==
 
 eslint-visitor-keys@^3.3.0:
   version "3.3.0"
@@ -1146,16 +1163,21 @@ eslint-visitor-keys@^3.4.1:
   resolved "https://registry.yarnpkg.com/eslint-visitor-keys/-/eslint-visitor-keys-3.4.1.tgz#c22c48f48942d08ca824cc526211ae400478a994"
   integrity sha512-pZnmmLwYzf+kWaM/Qgrvpen51upAktaaiI01nsJD/Yr3lMOdNtq0cxkrrg16w64VtisN6okbs7Q8AfGqj4c9fA==
 
-eslint@^8.49.0:
+eslint-visitor-keys@^3.4.3:
-  version "8.49.0"
+  version "3.4.3"
-  resolved "https://registry.yarnpkg.com/eslint/-/eslint-8.49.0.tgz#09d80a89bdb4edee2efcf6964623af1054bf6d42"
+  resolved "https://registry.yarnpkg.com/eslint-visitor-keys/-/eslint-visitor-keys-3.4.3.tgz#0cd72fe8550e3c2eae156a96a4dddcd1c8ac5800"
-  integrity sha512-jw03ENfm6VJI0jA9U+8H5zfl5b+FvuU3YYvZRdZHOlU2ggJkxrlkJH4HcDrZpj6YwD8kuYqvQM8LyesoazrSOQ==
+  integrity sha512-wpc+LXeiyiisxPlEkUzU6svyS1frIO3Mgxj1fdy7Pm8Ygzguax2N3Fa/D/ag1WqbOprdI+uY6wMUl8/a2G+iag==
+
+eslint@^8.48.0:
+  version "8.48.0"
+  resolved "https://registry.yarnpkg.com/eslint/-/eslint-8.48.0.tgz#bf9998ba520063907ba7bfe4c480dc8be03c2155"
+  integrity sha512-sb6DLeIuRXxeM1YljSe1KEx9/YYeZFQWcV8Rq9HfigmdDEugjLEVEa1ozDjL6YDjBpQHPJxJzze+alxi4T3OLg==
   dependencies:
     "@eslint-community/eslint-utils" "^4.2.0"
     "@eslint-community/regexpp" "^4.6.1"
     "@eslint/eslintrc" "^2.1.2"
-    "@eslint/js" "8.49.0"
+    "@eslint/js" "8.48.0"
-    "@humanwhocodes/config-array" "^0.11.11"
+    "@humanwhocodes/config-array" "^0.11.10"
     "@humanwhocodes/module-importer" "^1.0.1"
     "@nodelib/fs.walk" "^1.2.8"
     ajv "^6.12.4"
@@ -1189,14 +1211,14 @@ eslint@^8.49.0:
     strip-ansi "^6.0.1"
     text-table "^0.2.0"
 
-espree@^9.0.0, espree@^9.6.1:
+espree@^6.0.0:
-  version "9.6.1"
+  version "6.2.1"
-  resolved "https://registry.yarnpkg.com/espree/-/espree-9.6.1.tgz#a2a17b8e434690a5432f2f8018ce71d331a48c6f"
+  resolved "https://registry.yarnpkg.com/espree/-/espree-6.2.1.tgz#77fc72e1fd744a2052c20f38a5b575832e82734a"
-  integrity sha512-oruZaFkjorTpF32kDSI5/75ViwGeZginGGy2NoOSg3Q9bnwlnmDm4HLnkl0RE3n+njDXR037aY1+x58Z/zFdwQ==
+  integrity sha512-ysCxRQY3WaXJz9tdbWOwuWr5Y/XrPTGX9Kiz3yoUXwW0VZ4w30HTkQLaGx/+ttFjF8i+ACbArnB4ce68a9m5hw==
   dependencies:
-    acorn "^8.9.0"
+    acorn "^7.1.1"
-    acorn-jsx "^5.3.2"
+    acorn-jsx "^5.2.0"
-    eslint-visitor-keys "^3.4.1"
+    eslint-visitor-keys "^1.1.0"
 
 espree@^9.3.1:
   version "9.3.3"
@@ -1216,6 +1238,15 @@ espree@^9.6.0:
     acorn-jsx "^5.3.2"
     eslint-visitor-keys "^3.4.1"
 
+espree@^9.6.1:
+  version "9.6.1"
+  resolved "https://registry.yarnpkg.com/espree/-/espree-9.6.1.tgz#a2a17b8e434690a5432f2f8018ce71d331a48c6f"
+  integrity sha512-oruZaFkjorTpF32kDSI5/75ViwGeZginGGy2NoOSg3Q9bnwlnmDm4HLnkl0RE3n+njDXR037aY1+x58Z/zFdwQ==
+  dependencies:
+    acorn "^8.9.0"
+    acorn-jsx "^5.3.2"
+    eslint-visitor-keys "^3.4.1"
+
 esprima@^4.0.1:
   version "4.0.1"
   resolved "https://registry.yarnpkg.com/esprima/-/esprima-4.0.1.tgz#13b04cdb3e6c5d19df91ab6987a8695619b0aa71"
@@ -1701,15 +1732,16 @@ json5@^2.2.3:
   resolved "https://registry.yarnpkg.com/json5/-/json5-2.2.3.tgz#78cd6f1a19bdc12b73db5ad0c61efd66c1e29283"
   integrity sha512-XmOWe7eyHYH14cLdVPoyg+GOH3rYX++KpzrylJwSW98t3Nk+U8XOl8FWKOgwtzdb8lXGf6zYwDUzeHMWfxasyg==
 
-jsonc-eslint-parser@^2.3.0:
+jsonc-eslint-parser@^1.0.1:
-  version "2.3.0"
+  version "1.4.1"
-  resolved "https://registry.yarnpkg.com/jsonc-eslint-parser/-/jsonc-eslint-parser-2.3.0.tgz#7c2de97d01bff7227cbef2f25d1025d42a36198b"
+  resolved "https://registry.yarnpkg.com/jsonc-eslint-parser/-/jsonc-eslint-parser-1.4.1.tgz#8cbe99f6f5199acbc5a823c4c0b6135411027fa6"
-  integrity sha512-9xZPKVYp9DxnM3sd1yAsh/d59iIaswDkai8oTxbursfKYbg/ibjX0IzFt35+VZ8iEW453TVTXztnRvYUQlAfUQ==
+  integrity sha512-hXBrvsR1rdjmB2kQmUjf1rEIa+TqHBGMge8pwi++C+Si1ad7EjZrJcpgwym+QGK/pqTx+K7keFAtLlVNdLRJOg==
   dependencies:
-    acorn "^8.5.0"
+    acorn "^7.4.1"
-    eslint-visitor-keys "^3.0.0"
+    eslint-utils "^2.1.0"
-    espree "^9.0.0"
+    eslint-visitor-keys "^1.3.0"
-    semver "^7.3.5"
+    espree "^6.0.0"
+    semver "^6.3.0"
 
 jsonc-parser@^3.2.0:
   version "3.2.0"
@@ -1763,7 +1795,7 @@ lodash.merge@^4.6.2:
   resolved "https://registry.yarnpkg.com/lodash.merge/-/lodash.merge-4.6.2.tgz#558aa53b43b661e1925a0afdfa36a9a1085fe57a"
   integrity sha512-0KpjqXRVvrYyCsX1swR/XTK0va6VQkQM6MNo7PqW77ByjAhoARA8EfrP1N4+KlKj8YS0ZUCtRT/YUuhyYDujIQ==
 
-lodash@^4.17.21:
+lodash@^4.17.20, lodash@^4.17.21:
   version "4.17.21"
   resolved "https://registry.yarnpkg.com/lodash/-/lodash-4.17.21.tgz#679591c564c3bffaae8454cf0b3df370c3d6911c"
   integrity sha512-v2kDEe57lecTulaDIuNTPy3Ry4gLGJ6Z1O3vE1krgXZNrsQ+LFTGHVxVjcXPs17LhbZVGedAJv8XZ1tvj5FvSg==
@@ -2179,10 +2211,10 @@ safe-regex-test@^1.0.0:
     get-intrinsic "^1.1.3"
     is-regex "^1.1.4"
 
-sass@^1.66.1:
+sass@^1.64.2:
-  version "1.66.1"
+  version "1.64.2"
-  resolved "https://registry.yarnpkg.com/sass/-/sass-1.66.1.tgz#04b51c4671e4650aa393740e66a4e58b44d055b1"
+  resolved "https://registry.yarnpkg.com/sass/-/sass-1.64.2.tgz#0d9805ad6acf31c59c3acc725fcfb91b7fcc6909"
-  integrity sha512-50c+zTsZOJVgFfTgwwEzkjA3/QACgdNsKueWPyAR0mRINIvLAStVQBbPg14iuqEQ74NPDbXzJARJ/O4SI1zftA==
+  integrity sha512-TnDlfc+CRnUAgLO9D8cQLFu/GIjJIzJCGkE7o4ekIGQOH7T3GetiRR/PsTWJUHhkzcSPrARkPI+gNWn5alCzDg==
   dependencies:
     chokidar ">=3.0.0 <4.0.0"
     immutable "^4.0.0"
@@ -2193,12 +2225,10 @@ sass@^1.66.1:
   resolved "https://registry.yarnpkg.com/semver/-/semver-5.7.1.tgz#a954f931aeba508d307bbf069eff0c01c96116f7"
   integrity sha512-sauaDf/PZdVgrLTNYHRtpXa1iRiKcaebiKQ1BJdpQlWH2lCvexQdX55snPFyK7QzpudqbCI0qXFfOasHdyNDGQ==
 
-semver@^7.3.5, semver@^7.5.4:
+semver@^6.3.0:
-  version "7.5.4"
+  version "6.3.0"
-  resolved "https://registry.yarnpkg.com/semver/-/semver-7.5.4.tgz#483986ec4ed38e1c6c48c34894a9182dbff68a6e"
+  resolved "https://registry.yarnpkg.com/semver/-/semver-6.3.0.tgz#ee0a64c8af5e8ceea67687b133761e1becbd1d3d"
-  integrity sha512-1bCSESV6Pv+i21Hvpxp3Dx+pSD8lIPt8uVjRrxAUt/nbswYc+tK6Y2btiULjd4+fnq15PX+nqQDC7Oft7WkwcA==
+  integrity sha512-b39TBaTSfV6yBrapU89p5fKekE2m/NwnDocOVruQFS1/veMgdzuPcnOM34M6CwxW8jH/lxEa5rBoDeUwu5HHTw==
-  dependencies:
-    lru-cache "^6.0.0"
 
 semver@^7.3.6, semver@^7.3.7:
   version "7.3.7"
@@ -2214,6 +2244,13 @@ semver@^7.3.8:
   dependencies:
     lru-cache "^6.0.0"
 
+semver@^7.5.4:
+  version "7.5.4"
+  resolved "https://registry.yarnpkg.com/semver/-/semver-7.5.4.tgz#483986ec4ed38e1c6c48c34894a9182dbff68a6e"
+  integrity sha512-1bCSESV6Pv+i21Hvpxp3Dx+pSD8lIPt8uVjRrxAUt/nbswYc+tK6Y2btiULjd4+fnq15PX+nqQDC7Oft7WkwcA==
+  dependencies:
+    lru-cache "^6.0.0"
+
 shebang-command@^1.2.0:
   version "1.2.0"
   resolved "https://registry.yarnpkg.com/shebang-command/-/shebang-command-1.2.0.tgz#44aac65b695b03398968c39f363fee5deafdf1ea"
@@ -2275,7 +2312,7 @@ source-map-support@~0.5.20:
     buffer-from "^1.0.0"
     source-map "^0.6.0"
 
-source-map@^0.6.0, source-map@^0.6.1, source-map@~0.6.1:
+source-map@0.6.1, source-map@^0.6.0, source-map@^0.6.1, source-map@~0.6.1:
   version "0.6.1"
   resolved "https://registry.yarnpkg.com/source-map/-/source-map-0.6.1.tgz#74722af32e9614e9c287a8d0bbde48b5e2f1a263"
   integrity sha512-UjgapumWlbMhkBgzT7Ykc5YXUT46F0iKu8SGXq0bcwP5dz/h0Plj6enJqjz1Zbq2l5WaqYnrVbwWOWMyF3F47g==
@@ -2379,10 +2416,10 @@ supports-preserve-symlinks-flag@^1.0.0:
   resolved "https://registry.yarnpkg.com/supports-preserve-symlinks-flag/-/supports-preserve-symlinks-flag-1.0.0.tgz#6eda4bd344a3c94aea376d4cc31bc77311039e09"
   integrity sha512-ot0WnXS9fgdkgIcePe6RHNk1WA8+muPa6cSjeR3V8K27q9BB1rTE3R1p7Hv0z1ZyAc8s6Vvv8DIyWf681MAt0w==
 
-terser@^5.19.4:
+terser@^5.19.2:
-  version "5.19.4"
+  version "5.19.2"
-  resolved "https://registry.yarnpkg.com/terser/-/terser-5.19.4.tgz#941426fa482bf9b40a0308ab2b3cd0cf7c775ebd"
+  resolved "https://registry.yarnpkg.com/terser/-/terser-5.19.2.tgz#bdb8017a9a4a8de4663a7983f45c506534f9234e"
-  integrity sha512-6p1DjHeuluwxDXcuT9VR8p64klWJKo1ILiy19s6C9+0Bh2+NWTX6nD9EPppiER4ICkHDVB1RkVpin/YW2nQn/g==
+  integrity sha512-qC5+dmecKJA4cpYxRa5aVkKehYsQKc+AHeKl0Oe62aYjBL8ZA33tTljktDHJSaxxMnbI5ZYw+o/S2DxxLu8OfA==
   dependencies:
     "@jridgewell/source-map" "^0.3.3"
     acorn "^8.8.2"
@@ -2538,15 +2575,15 @@ vue-eslint-parser@^9.3.1:
     lodash "^4.17.21"
     semver "^7.3.6"
 
-vue-i18n@^9.3.0:
+vue-i18n@^9.2.2:
-  version "9.3.0"
+  version "9.2.2"
-  resolved "https://registry.yarnpkg.com/vue-i18n/-/vue-i18n-9.3.0.tgz#d85551098ab377e4237a101c77bfc05fd4887ff5"
+  resolved "https://registry.yarnpkg.com/vue-i18n/-/vue-i18n-9.2.2.tgz#aeb49d9424923c77e0d6441e3f21dafcecd0e666"
-  integrity sha512-+2L+ae/e4+fixhjym3lgzGCGQG8wVGlGrDHzjfdgUudheHvbVHu5i6tn6FF+buH75UFA7T5ZO2ZO7zrh6CzuaA==
+  integrity sha512-yswpwtj89rTBhegUAv9Mu37LNznyu3NpyLQmozF3i1hYOhwpG8RjcjIFIIfnu+2MDZJGSZPXaKWvnQA71Yv9TQ==
   dependencies:
-    "@intlify/core-base" "9.3.0"
+    "@intlify/core-base" "9.2.2"
-    "@intlify/shared" "9.3.0"
+    "@intlify/shared" "9.2.2"
-    "@intlify/vue-devtools" "9.3.0"
+    "@intlify/vue-devtools" "9.2.2"
-    "@vue/devtools-api" "^6.5.0"
+    "@vue/devtools-api" "^6.2.1"
 
 vue-router@^4.2.4:
   version "4.2.4"
@@ -2563,13 +2600,13 @@ vue-template-compiler@^2.7.14:
     de-indent "^1.0.2"
     he "^1.2.0"
 
-vue-tsc@^1.8.10:
+vue-tsc@^1.8.8:
-  version "1.8.10"
+  version "1.8.8"
-  resolved "https://registry.yarnpkg.com/vue-tsc/-/vue-tsc-1.8.10.tgz#7a5253b078a4728d90286f7bef42108e39a191e7"
+  resolved "https://registry.yarnpkg.com/vue-tsc/-/vue-tsc-1.8.8.tgz#67317693eb2ef6747e89e6d834eeb6d2deb8871d"
-  integrity sha512-ptpTFFDoHQgkWJF7i5iERxooiQzOGtG1uKTfmAUuS3qPuSQGq+Ky/S8BFHhnFGwoOxq/PjmGN2QSZEfg1rtzQA==
+  integrity sha512-bSydNFQsF7AMvwWsRXD7cBIXaNs/KSjvzWLymq/UtKE36697sboX4EccSHFVxvgdBlI1frYPc/VMKJNB7DFeDQ==
   dependencies:
-    "@vue/language-core" "1.8.10"
+    "@vue/language-core" "1.8.8"
-    "@vue/typescript" "1.8.10"
+    "@vue/typescript" "1.8.8"
     semver "^7.3.8"
 
 vue@^3.3.4:
@@ -2638,19 +2675,19 @@ yallist@^4.0.0:
   resolved "https://registry.yarnpkg.com/yallist/-/yallist-4.0.0.tgz#9bb92790d9c0effec63be73519e11a35019a3a72"
   integrity sha512-3wdGidZyq5PB084XLES5TpOSRA3wjXAlIWMhum2kRcv/41Sn2emQ0dycQW4uZXLejwKvg6EsvbdlVL+FYEct7A==
 
-yaml-eslint-parser@^1.2.2:
+yaml-eslint-parser@^0.3.2:
-  version "1.2.2"
+  version "0.3.2"
-  resolved "https://registry.yarnpkg.com/yaml-eslint-parser/-/yaml-eslint-parser-1.2.2.tgz#1a9673ebe254328cfc2fa99f297f6d8c9364ccd8"
+  resolved "https://registry.yarnpkg.com/yaml-eslint-parser/-/yaml-eslint-parser-0.3.2.tgz#c7f5f3904f1c06ad55dc7131a731b018426b4898"
-  integrity sha512-pEwzfsKbTrB8G3xc/sN7aw1v6A6c/pKxLAkjclnAyo5g5qOh6eL9WGu0o3cSDQZKrTNk4KL4lQSwZW+nBkANEg==
+  integrity sha512-32kYO6kJUuZzqte82t4M/gB6/+11WAuHiEnK7FreMo20xsCKPeFH5tDBU7iWxR7zeJpNnMXfJyXwne48D0hGrg==
   dependencies:
-    eslint-visitor-keys "^3.0.0"
+    eslint-visitor-keys "^1.3.0"
-    lodash "^4.17.21"
+    lodash "^4.17.20"
-    yaml "^2.0.0"
+    yaml "^1.10.0"
 
-yaml@^2.0.0:
+yaml@^1.10.0:
-  version "2.3.2"
+  version "1.10.2"
-  resolved "https://registry.yarnpkg.com/yaml/-/yaml-2.3.2.tgz#f522db4313c671a0ca963a75670f1c12ea909144"
+  resolved "https://registry.yarnpkg.com/yaml/-/yaml-1.10.2.tgz#2301c5ffbf12b467de8da2333a459e29e7920e4b"
-  integrity sha512-N/lyzTPaJasoDmfV7YTrYCI0G/3ivm/9wdG0aHuheKowWQwGTsK0Eoiw6utmzAnI6pkJa0DUVygvp3spqqEKXg==
+  integrity sha512-r3vXyErRCYJ7wg28yvBY5VSoAF8ZvlcW9/BwUzEtUsjvX/DKs24dIkuwjtuprwJJHsbyUbLApepYTR1BN4uHrg==
 
 yocto-queue@^0.1.0:
   version "0.1.0"