implement UI for target power consumption

include/Configuration.h

@@ -108,6 +108,8 @@ struct CONFIG_T {
     bool PowerLimiter_IsInverterBehindPowerMeter;
     uint8_t PowerLimiter_InverterId;
     uint8_t PowerLimiter_InverterChannelId;
+    uint32_t PowerLimiter_TargetPowerConsumption;
+    uint32_t PowerLimiter_TargetPowerConsumptionHysteresis;
     uint32_t PowerLimiter_LowerPowerLimit;
     uint32_t PowerLimiter_UpperPowerLimit;
     uint32_t PowerLimiter_BatterySocStartThreshold;

include/defaults.h

@@ -98,6 +98,8 @@
 #define POWERLIMITER_IS_INVERTER_BEHIND_POWER_METER true
 #define POWERLIMITER_INVERTER_ID 0
 #define POWERLIMITER_INVERTER_CHANNEL_ID 0
+#define POWERLIMITER_TARGET_POWER_CONSUMPTION 0
+#define POWERLIMITER_TARGET_POWER_CONSUMPTION_HYSTERESIS 0
 #define POWERLIMITER_LOWER_POWER_LIMIT 10
 #define POWERLIMITER_UPPER_POWER_LIMIT 800
 #define POWERLIMITER_BATTERY_SOC_START_THRESHOLD 80

src/Configuration.cpp

@@ -125,6 +125,8 @@ bool ConfigurationClass::write()
     powerlimiter["is_inverter_behind_powermeter"] = config.PowerLimiter_IsInverterBehindPowerMeter;
     powerlimiter["inverter_id"] = config.PowerLimiter_InverterId;
     powerlimiter["inverter_channel_id"] = config.PowerLimiter_InverterChannelId;
+    powerlimiter["target_power_consumption"] = config.PowerLimiter_TargetPowerConsumption;
+    powerlimiter["target_power_consumption_hysteresis"] = config.PowerLimiter_TargetPowerConsumptionHysteresis;
     powerlimiter["lower_power_limit"] = config.PowerLimiter_LowerPowerLimit;
     powerlimiter["upper_power_limit"] = config.PowerLimiter_UpperPowerLimit;
     powerlimiter["battery_soc_start_threshold"] = config.PowerLimiter_BatterySocStartThreshold;
@@ -288,6 +290,8 @@ bool ConfigurationClass::read()
     config.PowerLimiter_IsInverterBehindPowerMeter = powerlimiter["is_inverter_behind_powermeter"] | POWERLIMITER_IS_INVERTER_BEHIND_POWER_METER;
     config.PowerLimiter_InverterId = powerlimiter["inverter_id"] | POWERLIMITER_INVERTER_ID;
     config.PowerLimiter_InverterChannelId = powerlimiter["inverter_channel_id"] | POWERLIMITER_INVERTER_CHANNEL_ID;
+    config.PowerLimiter_InverterChannelId = powerlimiter["target_power_consumption"] | POWERLIMITER_TARGET_POWER_CONSUMPTION;
+    config.PowerLimiter_InverterChannelId = powerlimiter["target_power_consumption_hysteresis"] | POWERLIMITER_TARGET_POWER_CONSUMPTION_HYSTERESIS;
     config.PowerLimiter_LowerPowerLimit = powerlimiter["lower_power_limit"] | POWERLIMITER_LOWER_POWER_LIMIT;
     config.PowerLimiter_UpperPowerLimit = powerlimiter["upper_power_limit"] | POWERLIMITER_UPPER_POWER_LIMIT;
     config.PowerLimiter_BatterySocStartThreshold = powerlimiter["battery_soc_start_threshold"] | POWERLIMITER_BATTERY_SOC_START_THRESHOLD;

src/WebApi_powerlimiter.cpp

@@ -42,6 +42,8 @@ void WebApiPowerLimiterClass::onStatus(AsyncWebServerRequest* request)
     root[F("is_inverter_behind_powermeter")] = config.PowerLimiter_IsInverterBehindPowerMeter;
     root[F("inverter_id")] = config.PowerLimiter_InverterId;
     root[F("inverter_channel_id")] = config.PowerLimiter_InverterChannelId;
+    root[F("target_power_consumption")] = config.PowerLimiter_TargetPowerConsumption;
+    root[F("target_power_consumption_hysteresis")] = config.PowerLimiter_TargetPowerConsumptionHysteresis;
     root[F("lower_power_limit")] = config.PowerLimiter_LowerPowerLimit;
     root[F("upper_power_limit")] = config.PowerLimiter_UpperPowerLimit;
     root[F("battery_soc_start_threshold")] = config.PowerLimiter_BatterySocStartThreshold;
@@ -102,7 +104,10 @@ void WebApiPowerLimiterClass::onAdminPost(AsyncWebServerRequest* request)
     if (!(root.containsKey("enabled") 
         	&& root.containsKey("lower_power_limit")
             && root.containsKey("inverter_id")
-            && root.containsKey("inverter_channel_id"))) {
+            && root.containsKey("inverter_channel_id")
+            && root.containsKey("target_power_consumption")
+            && root.containsKey("target_power_consumption_hysteresis")
+        )) {
         retMsg[F("message")] = F("Values are missing!");
         response->setLength();
         request->send(response);
@@ -119,6 +124,8 @@ void WebApiPowerLimiterClass::onAdminPost(AsyncWebServerRequest* request)
     config.PowerLimiter_IsInverterBehindPowerMeter = root[F("is_inverter_behind_powermeter")].as<bool>();
     config.PowerLimiter_InverterId = root[F("inverter_id")].as<uint8_t>();
     config.PowerLimiter_InverterChannelId = root[F("inverter_channel_id")].as<uint8_t>();
+    config.PowerLimiter_TargetPowerConsumption = root[F("target_power_consumption")].as<uint32_t>();
+    config.PowerLimiter_TargetPowerConsumptionHysteresis = root[F("target_power_consumption_hysteresis")].as<uint32_t>();
     config.PowerLimiter_LowerPowerLimit = root[F("lower_power_limit")].as<uint32_t>();
     config.PowerLimiter_UpperPowerLimit = root[F("upper_power_limit")].as<uint32_t>();
     config.PowerLimiter_BatterySocStartThreshold = root[F("battery_soc_start_threshold")].as<float>();
@@ -135,6 +142,5 @@ void WebApiPowerLimiterClass::onAdminPost(AsyncWebServerRequest* request)
     request->send(response);
 
     MqttSettings.performReconnect();  // TODO(helge) is this really needed
-    MqttHandleHass.forceUpdate();   // TODO(helge) is this really needed
     PowerLimiter.init();
 }

webapp/src/locales/de.json

@@ -447,7 +447,12 @@
         "InverterId": "Wechselrichter ID",
         "InverterIdHint": "Wähle den Wechselrichter an dem die Batterie hängt.",
         "InverterChannelId": "Kanal ID",
-        "InverterChannelIdHint": "Wähle den Kanal an dem die Batterie hängt."
+        "InverterChannelIdHint": "Wähle den Kanal an dem die Batterie hängt.",
+        "TargetPowerConsumption": "Erlaubter Stromverbrauch",
+        "TargetPowerConsumptionHint": "Angestrebter erlaubter Stromverbrauch.",
+        "TargetPowerConsumptionHysteresis": "Hysterese für den Zielstromverbrauch",
+        "TargetPowerConsumptionHysteresisHint": "Wert um den der Zielstromverbrauch schwanken darf, ohne dass nachgeregelt wird."
+        
     },
     "batteryadmin": {
         "BatterySettings": "Batterie Einstellungen",

webapp/src/locales/en.json

@@ -454,6 +454,10 @@
         "InverterIdHint": "Select proper inverter ID where battery is connected to.",
         "InverterChannelId": "Channel ID",
         "InverterChannelIdHint": "Select proper channel where battery is connected to.",
+        "TargetPowerConsumption": "Target power consumption",
+        "TargetPowerConsumptionHint": "Set the grid power consumption the limiter tries to achieve.",
+        "TargetPowerConsumptionHysteresis": "Hysteresis for power consumption",
+        "TargetPowerConsumptionHysteresisHint": "Value around which the target power consumption fluctuates without readjustment.",
         "LowerPowerLimit": "Lower power limit / continuous feed",
         "UpperPowerLimit": "Upper power limit",
         "PowerMeters": "Power meters - MQTT",

webapp/src/types/PowerLimiterConfig.ts

@@ -7,6 +7,8 @@ export interface PowerLimiterConfig {
     is_inverter_behind_powermeter: boolean;
     inverter_id: number;
     inverter_channel_id: number;
+    target_power_consumption: number;
+    target_power_consumption_hysteresis: number;
     lower_power_limit: number;
     upper_power_limit: number;
     battery_soc_start_threshold: number;

webapp/src/views/PowerLimiterAdminView.vue

@@ -19,7 +19,7 @@
 
                 <div class="row mb-3" v-show="powerLimiterConfigList.enabled">
                     <label for="inputTimezone" class="col-sm-2 col-form-label">
-                        {{ $t('powerlimiteradmin.InverterId') }}
+                        {{ $t('powerlimiteradmin.InverterId') }}:
                         <BIconInfoCircle v-tooltip :title="$t('powerlimiteradmin.InverterIdHint')" />
                     </label>
                     <div class="col-sm-10">
@@ -33,7 +33,7 @@
 
                 <div class="row mb-3" v-show="powerLimiterConfigList.enabled">
                     <label for="inputTimezone" class="col-sm-2 col-form-label">
-                        {{ $t('powerlimiteradmin.InverterChannelId') }}
+                        {{ $t('powerlimiteradmin.InverterChannelId') }}:
                         <BIconInfoCircle v-tooltip :title="$t('powerlimiteradmin.InverterChannelIdHint')" />
                     </label>
                     <div class="col-sm-10">
@@ -44,6 +44,34 @@
                         </select>
                     </div>
                 </div>
+
+                <div class="row mb-3" v-show="powerLimiterConfigList.enabled">
+                    <label for="targetPowerConsumption" class="col-sm-2 col-form-label">{{ $t('powerlimiteradmin.TargetPowerConsumption') }}:
+                        <BIconInfoCircle v-tooltip :title="$t('powerlimiteradmin.TargetPowerConsumptionHint')" />
+                    </label>
+                    <div class="col-sm-10">
+                        <div class="input-group">
+                            <input type="number" class="form-control" id="targetPowerConsumption"
+                                placeholder="70" min="10" v-model="powerLimiterConfigList.target_power_consumption"
+                                aria-describedby="targetPowerConsumptionDescription" />
+                                <span class="input-group-text" id="targetPowerConsumptionDescription">W</span>
+                        </div>
+                    </div>
+                </div>
+
+                <div class="row mb-3" v-show="powerLimiterConfigList.enabled">
+                    <label for="targetPowerConsumptionHyteresis" class="col-sm-2 col-form-label">{{ $t('powerlimiteradmin.TargetPowerConsumptionHysteresis') }}:
+                        <BIconInfoCircle v-tooltip :title="$t('powerlimiteradmin.TargetPowerConsumptionHysteresisHint')" />
+                    </label>
+                    <div class="col-sm-10">
+                        <div class="input-group">
+                            <input type="number" class="form-control" id="targetPowerConsumptionHysteresis"
+                                placeholder="25" min="10" v-model="powerLimiterConfigList.target_power_consumption_hysteresis"
+                                aria-describedby="targetPowerConsumptionHysteresisDescription" />
+                                <span class="input-group-text" id="targetPowerConsumptionHysteresisDescription">W</span>
+                        </div>
+                    </div>
+                </div>
                 
                 <div class="row mb-3" v-show="powerLimiterConfigList.enabled">
                     <label for="inputLowerPowerLimit" class="col-sm-2 col-form-label">{{ $t('powerlimiteradmin.LowerPowerLimit') }}:</label>